1. Mounting and clamping

The specimen and the sensor axis must be kept concentric; off-centre loading introduces additional error. Clamp only tightly enough to prevent slipping, and avoid damaging the specimen.

2. Test speed

In manual testing, apply force smoothly and evenly — impact loading inflates the peak reading. On motorised models, set the speed specified by the relevant standard.

3. Operating environment

Avoid strong vibration, strong electromagnetic interference and high humidity. If the instrument is idle for long periods, power it up periodically and allow it to warm up.

4. Calibration interval

Have the instrument calibrated by a metrology laboratory once a year. For intensive use or for outgoing goods inspection, an intermediate check every six months is advisable, with the results recorded and filed.