1. Product status update (important)
UNITTA (Japan) has officially confirmed that the classic U-508 is fully discontinued and no longer supplied. No new units are being produced; only limited after-sales service remains. The U-550 is the only original-manufacturer replacement and upgrade model on the market.
The U-550 is the successor to the U-508. Measuring principle, operating method and probe accessories are 100% compatible, while measurement speed, interference rejection, belt database, display and QC functions have all been upgraded. It fully replaces and outperforms the older U-508.
2. Product overview
Both instruments are sonic non-contact belt tension meters. They pick up the natural vibration frequency of the belt and convert it automatically into belt tension. Measurement is contact-free — the belt is neither compressed nor damaged — making them suitable for installation, commissioning and routine maintenance of timing belts, V-ribbed belts, V-belts and flat belts in automation equipment, fans, air compressors, printing machinery, automotive drives and precision machine tools.
Because the U-508 is discontinued, all new projects, new purchases and equipment renewals should specify the U-550. Existing installations can be upgraded by replacing the U-508 main unit only: all existing probes are reused, with no need to replace the full accessory set.
3. Core specification comparison
| Item | U-508 (discontinued) | U-550 (current replacement) |
|---|---|---|
| Product status | Officially discontinued, no longer sold; after-sales service only | Current main model, manufacturer-recommended |
| Measuring principle | Sonic frequency method, non-contact | Sonic frequency method, non-contact (identical) |
| Frequency range | 10~5000Hz (2 ranges) | 10~5000Hz (3 auto ranges LOW/STD/HIGH), wider coverage |
| Tension range | 0.01~99900N | 0.01~99900N (same range) |
| Measurement accuracy | ±1% of reading | ±1% of reading (same accuracy, improved repeatability through algorithm) |
| Response speed | Approx. 0.5s | 0.2s — substantially faster measurement |
| Display | Conventional backlit LCD, poor visibility in strong light | Self-lit OLED, clearly readable in bright and dim light, higher contrast |
| Built-in belt database | 48 original-manufacturer belt parameter sets | 69 sets, covering mainstream UNITTA / Gates belt models |
| Custom process memory | 20 belt parameter sets | 40 sets — easier switching on multi-spec lines |
| Judgement function | No OK/NG limit judgement | New upper/lower limit judgement gives a direct pass/fail result |
| Interference rejection | Basic noise reduction | New-generation AGC automatic gain + intelligent noise reduction, more stable in complex workshop conditions |
| Display units | N, kgf, lbf, Hz | Same units, with simultaneous tension + frequency dual display |
| Probe compatibility | Works with all TM series sensors | Fully compatible with all existing U-508 probes, no accessory replacement needed |
| Dimensions / weight | 160×59×26mm / 120g | Identical — same feel and portability |
4. Key upgrades of the U-550 over the discontinued U-508
4.1 Universal accessories, no upgrade cost
The U-550 main unit works directly with the original U-508 accessories: flexible microphone TM-AMM, long-reach probe, electromagnetic induction probe, data cable and all other parts. Upgrading an existing installation means changing only the main unit.
4.2 Faster and more stable measurement
Response time improves from 0.5s to 0.2s, making repeat checks quicker. Intelligent noise reduction automatically filters out machine noise and ambient vibration, solving the fluctuating readings and poor repeatability common on the shop floor.
4.3 Expanded database for more belt types
Built-in belt parameters increase from 48 to 69 sets, covering most timing belt and V-ribbed belt specifications on the market. Custom memory doubles, so lines running multiple models and products do not need parameters re-entered each time.
4.4 OK/NG judgement for production QC
The U-550 accepts preset upper and lower tension limits and automatically judges pass/fail — suitable for outgoing inspection, quality control and standardised acceptance. This function is not available on the U-508.
4.5 OLED display readable in any light
Unlike the older LCD, the self-lit OLED remains legible in strong light and inside dimly lit machine enclosures, with no glare blind spots when reading on site.
5. Purchasing and selection advice (latest official position)
❌ Do not specify the U-508 for new projects: it is officially discontinued, with no new stock and no further production. It is available only as a service spare for legacy equipment.
✅ Specify the U-550 across the board:
- Fully replaces the discontinued U-508, with 100% compatibility of parameters, operation and accessories
- Comprehensive performance upgrade, better suited to modern volume-production QC and difficult conditions
- Continued original-manufacturer supply and full after-sales support, with no risk of supply interruption
6. Applications and measurement method
Suitable for tension adjustment on all drive belts: synchronous timing belts, V-ribbed belts, V-belts and flat belts. Widely used in automation equipment, servo drive systems, fans and pumps, air compressors, printing and packaging machinery, automotive drives and precision machine tool maintenance.
Measurement is non-contact acoustic pickup: the belt is neither damaged nor has its original tension state altered, giving far better consistency than traditional plunger-type tension meters.
7. Summary
The U-508 has been officially discontinued and withdrawn from the market. The U-550 is the only manufacturer-designated replacement and upgrade. It retains every advantage of the older model with 100% accessory compatibility, while upgrading speed, interference rejection, database, QC functions and display — making it the standard instrument for belt tension measurement today.