AMADA ML-8150A (5 W) YAG SHG Green Laser Welder (Model ML-8150A(5W)) is a AMADA Welding supplied by Guangzhou Yunke Electronics Co., Ltd. 5 W YAG SHG green laser welder for copper and gold, which absorb green light 4.5-20 times better than fundamental-wave laser light.
Brand: AMADA | Category: AMADA Welding
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | ML-8150A |
|---|---|
| Maximum Rated Output | 5 W (output power) |
| Maximum Output Energy | 4 J/P (pulse width 5 ms) |
| Oscillation Wavelength | 532nm(YAG-SHG) |
| Pulse Width | 0.3-5.0 ms (0.02 ms step) |
| Pulse Frequency | 1-30PPS |
| Number of Conditions | 32 conditions |
| Number of Split Beams | Simultaneous 2-way splitting |
| External Communication Interface | RS-485 |
| Input Power Supply | Single-phase AC200V/220V/240V |
| Cooling Method | Forced air cooling |
| Weight | 120kg |
| Dimensions H x W x D (mm) | 430*869*822 |
AMADA (Japan) ML-8150A(5W) is a YAG SHG green-light pulse welder that frequency-doubles YAG infrared laser light into green output; metals absorb green light well, making it especially suitable for precision spot welding of copper, gold and other highly reflective materials.
Laser welding of copper and gold is now possible; YAG SHG laser light is absorbed far better by copper and gold than fundamental-wave laser light, with absorption roughly 4.5-20 times higher (SHG: 2nd harmonic generation)
Automotive parts, electrical components, motors, electronic components, semiconductors and ICs, batteries, medical devices and optical communications.
A typical configuration includes the laser (or laser engine), the output head or galvo scanner unit, the cooling system and a welding monitor. Selection starts from the spot size, material and penetration depth to determine spot diameter and power, then the worktable or automation method.
Q: Which materials can this laser welder handle?
A: It is suitable for precision spot and seam welding of stainless steel, carbon steel, aluminium and copper. For specific materials and weld requirements, send us samples and we will help confirm the process by trial welding.
Q: How do I choose between laser welding and resistance welding?
A: Laser welding has a small heat-affected zone and suits tiny welds and thin-walled parts; resistance welding suits stable, high-volume lap welding. The choice depends on material, weld size and cycle time.
Q: Do you provide selection and after-sales support?
A: Guangzhou Yunke Electronics Co., Ltd. provides selection consulting, spare parts and after-sales support. Call us or use the contact details on this page for a quotation.
Q: What site conditions are required for installation?
A: Confirm the power supply capacity, air supply (for pneumatic press models), floor space and fume extraction/protection. Refer to the manual of the specific model for details.
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.