IMADA ZTS-2500N Force Gauges (Model ZTS-2500N) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA ZTS-2500N Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model Series | ZTS-2500N(ZTA is Height with Version This) |
|---|---|
| Rated Capacity | 2500N |
| Displayed Value | 2500N(2.500kN) |
| Resolution | 1N(0.001kN) |
| Kgf Level Display | 250kgf × 0.1kgf |
| Measurement Type | Force, Pressure Force (Dual toward Measurement) |
| Accuracy | ±0.2%F.S. ±1digit |
| Sampling Rate | Maximum 2000 times / s |
| Test Shaft Thread | M10 |
| Body Weight | Approx. 1100g(Height Load Type) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Item | Specification |
|---|---|
| Model | ZTS-2500N |
| Range | 2500N(2.5kN) |
| Resolution | 1N |
| Measurement Type | Pull, compression, two-way measurements.Channel |
| Accuracy | ±0.2%F.S. ±1digit |
| Sampling Rate | Maximum 2000 times/ seconds.Split%1SplitSp |
| Display | 4-bit EL (OLED) screen invertableScreaked by XQFScreaks |
| Display Update Rate | 16 times/ seconds |
| Measuring units | N, kof, lbf toggle |
| Built-in Memory | 1000 group measurements |
| Overload Specifications | Safely overloaded 200 %FS; load loaded 110 % FS sound alarm |
| Decision function | Compare output with upper and lower limits, OK/ +NG/-NG III |
| Signal Output | USB, Simulation 1 VDC, Ddiman, Comparative Output2 |
| Power | Charged battery, full of approximately 2 hours; continuously using approximately 6.5 hours, marked with AC adapter |
| Operating Environment | Temperature 0 ~ 40°C, humidity 20 ~ 80 % RH (no condensation) |
| Body Weight | About 1100g (some 490g with higher heights of the HQ). Reference: 1000N |
ZTS Full Timetable, Model, Capacity, Resolution, -, -, -, -,,. ZTS-2500N, 2500N, 1N, ZTS-5000N, 5000N, 1N, Quest Qu Qu , Q
Q: Distinguished ZTS-2500N and ZTA-2500N? Q: Differential ZTS-2500N and ZTA-2500N? Q: Differential  
A: Measurement hardware, fully aligned with the measure accuracyZTA-2500N Extra Location Transfer Output, U Disk StorageZTS does not have a U-disk storage feature
Q: What electric station can ZTS-2500N be equipped with?  
A: Recommendation IMADA MX2-2500N electric test station matching 2500N payload.. XQQQQ loads
Q: overload alarm threshold?  
A: A sound alarm beyond 110 % FS; maximum allowable mass of 200 % (not available for long-term overuse)
Q: What difference does it make, except for weight? . Reference: ZTS-1000N, ZTS
A: Different measuring sensor structures, higher weights and short battery renewal (6.5h vs 8h), software functionality, sampling rate, accuracy level
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.