MOTIVE M100 Digital Torque Tester (Model M100) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. MOTIVE M100 rugged digital torque tester, 1.5-115.0 kgf.cm, +/-0.5% FS, peak hold, bidirectional measurement, about 30 h battery life.
Brand: See datasheet | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | M100 |
|---|---|
| Test Range | 1.5~115.0 kgf · cm(Approx. 11.28 N · m Full Scale) |
| Accuracy | ±0.5% FS |
| Measuring Unit | kgf · cm, N · m, Lbf · in, Ozf · in Automatic Conversion |
| Main Functions | Peak Hold (HOLD), Data , Auto Zero |
| Measuring Direction | Correction toward can Measurement, Torque and Open Torque all Energy Measure |
| Charging time | 8 hours |
| Continuous Operating Time | Approx. 30 hours |
| Charging Power Supply | 100~240V AC Width Voltage |
| Dimensions | 250(W)×185(D)×75(H)mm |
| Total Weight | Approx. 3.0kg |
| Standard Accessories | Rotation Mechanical C-100; Sleeve φ4×32×H1 / 4, φ5×45×H1 / 4, φ6×45×H1 / 4, SH5×45×H1 / 4, SH6.35×45×H1 / 4 total 5 pcs; Spring 2 : (<10 kgf · cm), Copper (>10 kgf · cm) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The MOTIVE M100 is the mid-to-high range model of the Taiwanese MOTIVE M series of rugged digital torque testers. It measures 1.5–115.0 kgf·cm (approximately 11.28 N·m at full scale) with an accuracy of ±0.5% FS, and is used to set and verify the output of electric and pneumatic screwdrivers, torque screwdrivers and torque wrenches. It also handles small-part destructive tests, cap and stopper tightness checks, and torque classification of spindles and fixtures.
A die-cast housing and a sensor coupled directly to the test shaft give long-term stability on the production floor. A built-in rechargeable battery runs for about 30 hours on an 8-hour charge, so the instrument can be carried between workstations without a mains lead. For a quotation or help choosing a range, please contact our engineers.
Electronics and appliance assembly, metalworking and machinery, automotive components, plastic parts and fastener quality control. Used for setting and calibrating shut-off electric / pneumatic screwdrivers, torque screwdrivers and torque wrenches, as well as cap (stopper) tightness, small-part torsional breakage tests and torque sorting of shafts and jigs.
The M series covers four ranges: M10 (0.15–11.5 kgf·cm) for precision micro screws and small drivers; M50 (0.15–55 kgf·cm) for general electric screwdrivers and small torque wrenches; M100 (1.5–115 kgf·cm) for mid-to-high torque pneumatic drivers and wrenches; M200 (3–199.9 kgf·cm) for high-torque tools and destructive tests. Keep routine readings in the 20%–80% band of full scale. Units (kgf·cm, N·m, Lbf·in, Ozf·in) convert automatically. Standard accessories: rotating mechanism C-100; five sockets φ4×32×H1/4, φ5×45×H1/4, φ6×45×H1/4, SH5×45×H1/4 and SH6.35×45×H1/4; two springs, white (<10 kgf·cm) and copper (>10 kgf·cm).
Q: How do I choose among M10 / M50 / M100 / M200?
A: By the torque of the tool under test — see the ranges above, and keep readings in the 20%–80% band for best accuracy and stability.
Q: Can it measure reverse (loosening) torque?
A: Yes. The instrument works clockwise and counter-clockwise, so both tightening and loosening torque can be measured.
Guangzhou Yunke Electronic Co., Ltd. supplies the full MOTIVE M series with selection advice, quotations, demonstrations, spare sockets and springs, and after-sales support.
Values above are transcribed from the official MOTIVE M100 specification sheet; no values have been converted or rewritten. This is a quotation-only catalogue and no prices are listed.
For a quotation, lead time or a demonstration, please contact our engineers.