KILEWS KTM-6 Torque Testers (Model KTM-6) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. KILEWS KTM-6 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: KILEWS | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | KTM-6 |
|---|---|
| Test Range (Kgf · Cm) | 0.02~8.0 |
| Test Range (Lbf · in) | 0.02~7.0 |
| Test Range (N · M) | 0.2~80.0 cN·m |
| Accuracy | ±0.5% |
| Measuring Unit | kgf · cm, Lbf · in, N · m three Type Unit switchable |
| Measurement mode | TRACK(Real-time ) / PEAK(Peak Hold) |
| Statistical Functions | Automatic Meter Calculation Test Maximum, Minimum, Average |
| Hi / Lo Limit Judgment | can Setting Torque Range, Test not Compliant with when LED Warning Lamp Indication |
| Zero Setting Method | optional Auto Zero Open (Zero Setting Time 0.5~3.0 s Adjustable), also can Manual per Key Zero Setting |
| Data output | USB 1.0 Interface, can Connection Electric Reading and Management Management Test Data |
| Power Supply | 4.8V DC(Ni-MH Rechargeable Battery 1.2V×4 cells 1650mAh) |
| Charging time | Approx. 3 hours |
| Continuous operating time | Approx. 12 hours |
| Battery Life | can Charging 300 times or more |
| Dimensions | 230(W)×125(D)×65(H)mm |
| Total Weight | Approx. 1.8kg |
| Dedicated Charger | Input AC100~240V 50 / 60Hz, Output DC12V 400mA |
| Standard Accessories | Spring Test Base ×1(AJ-3), Dedicated Charger, Manual, with Case |
| Notes | not Available at Test Air Screwdriver; Over Output Maximum Measuring Range Operating; Charging when Same when Measurement, by Accuracy |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Model | Positioning | kgf·cm | Lbf·in | N·m | Accuracy |
|---|---|---|---|---|---|
| KTM-6 | Little torque | 0.02~8.0 | 0.02~7.0 | 0.2~80.0 cN·m | ±0.5% |
| KTM-15 | Little torque | 0.15~15.0 | 0.15~13.0 | 0.015~1.500 | ±0.5% |
| KTM-50S | Medium- and small-twig (semi-automatic start-up test for special use)% | 0.5~50.0 | 0.5~43.4 | 0.05~4.90 | ±0.5% |
| KTM-150 | Medium-to-twilight | 1.5~150.0 | 1.5~130.0 | 0.15~15.0 | ±0.5% |
| KTM-250 | Big TwilightWow | 3.0~250.0 | 3.0~217.0 | 0.30~25.00 | ±0.5% |
| KTM-1000 | Big TwilightWow | 50~1000 | 45~885 | 5~100 | ±0.5% |
| Spring test seatSpunners | Fit-to-former type | Note |
|---|---|---|
| AJ-3 | KTM-6 / KTM-15 | Maximum detectable 3 kgf cmSpunners |
| AJ-15 | KTM-15 / KTM-150 | Maximum detectable 15 kgf cmSpunners |
| AJ-15K | KTM-150 | Maximum detectable 15 kgf cmSpunners |
| AJ-50 / AJ-50S | KTM-150 / KTM-50S | Maximum detectable 50 kgf cm |
| AJ-150 | KTM-150 | Maximum detectable 150 kgf cmSpunners |
| AJ-250 | KTM-250 | Maximum detectable 250 kgf cmSpunners |
| SJ-100 | KTM-1000 | Maximum detectable 1000 kgf cm |
Electronics assembly, cellular phone / laptop / digital camera, etc. 3C assembly, auto parts, home appliances, hardware plastic screws, and fastening process. for shut-down (shut-off) electric starters, Semi-automatic electric lifts, torque lifts, torque torque setting, routine spot and torque tests are commonly used instruments for tight torque management of the production thread
Q: What about the six paragraphs of the KTM series?!?
A: Selected between 20 per cent ~ 80 per cent, which is actually determined by the measure tool, for micro-twig screws; KTM-15 (0.15--ZXI) for small torque electric starters; KTM-50S (0.5-50) for semi-automatic start-up tests; Q; Q-50; Quasi-to-dots (0.5 KTM-150 (1.5-150) for medium and small torque; KTM-250 (3 — 250) and KTM-1000 (50 — 1000) are used for large torque tools and wrench wrench.s are checked to approach the two boundaries. It is recommended that a larger batch be selected to protect the sensor.!. Reference: KTM-6, 8 kgf, 0.02, 15
Q: Can you use it for a gas-motion startup?
A: No. The KTM series does not apply to test of aerodynamic (shock) starters, but only to shut-down and semi-automatic electric starters; and torque beyond the maximum gauge of the instrument is strictly forbidden to be damaged to avoid damage to the sensor
Q: What's the spring test seat, how does it fit?
A: Ssharewön is a component installed on a torque counter, used to carry the head of the head and absorb the torque, with different scales and different rigidity, randomly assigned to model numbers, and may be purchased separately. The replacement of the test seat suggested re-calibration of the match, which may vary from one reading to another, as a result of the different spring characteristics. —
Q: Can measurements be directed to computers?
A: Yes. The instrument with USB 1.0 interface is used for data output, and the selected data lines and software are readable, recorded and managed for testing data on computers..Screts and software.ScopeScretsSSSS Note that USB is used solely for data transmission and cannot be charged to the instrument
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.