Home › Products

Product Overview

KILEWS KTM-150 Digital Torque Tester (Model KTM-150) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. KILEWS KTM-150 digital torque tester, 1.5-150.0 kgf.cm, +/-0.5%, programmable limits with LED judgement, MAX/MIN/AVE, USB 1.0 output.

Brand: KILEWS | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

KILEWS KTM-150 Digital Torque Tester

Technical Specifications

ModelKTM-150
Test Range (Kgf · Cm)1.5~150.0
Test Range (Lbf · in)1.5~130.0
Test Range (N · M)0.15~15.0
Accuracy±0.5%
Measuring Unitkgf · cm, Lbf · in, N · m three Type Unit switchable
Measurement modeTRACK(Real-time ) / PEAK(Peak Hold)
Statistical FunctionsAutomatic Meter Calculation Test Maximum, Minimum, Average
Hi / Lo Limit Judgmentcan Setting Torque Range, Test not Compliant with when LED Warning Lamp Indication
Zero Setting Methodoptional Auto Zero Open (Zero Setting Time 0.5~3.0 s Adjustable), also can Manual per Key Zero Setting
Data outputUSB 1.0 Interface, can Connection Electric Reading and Management Management Test Data
Power Supply4.8V DC(Ni-MH Rechargeable Battery 1.2V×4 cells 1650mAh)
Charging timeApprox. 3 hours
Continuous operating timeApprox. 12 hours
Battery Lifecan Charging 300 times or more
Dimensions230(W)×125(D)×65(H)mm
Total WeightApprox. 1.8kg
Dedicated ChargerInput AC100~240V 50 / 60Hz, Output DC12V 400mA
Standard AccessoriesSpring Test Base ×3(AJ-150 / AJ-50 / AJ-15K), Dedicated Charger, Manual, with Case
Notesnot Available at Test Air Screwdriver; Over Output Maximum Measuring Range Operating; Charging when Same when Measurement, by Accuracy

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

The KILEWS KTM-150 is a digital torque tester for small and medium torque ranges. It measures 1.5–150.0 kgf·cm (1.5–130.0 Lbf·in / 0.15–15.0 N·m) at ±0.5% accuracy and is used to set and routinely check electric screwdrivers, torque screwdrivers and torque wrenches. Upper and lower torque limits can be programmed; an LED warning lamp signals an out-of-range result immediately, so an operator does not have to watch the display on a production line. For help selecting a range, please contact our engineers.

The instrument automatically calculates maximum, minimum and average values, offers TRACK and PEAK modes, adjustable automatic zero (0.5–3.0 s) and USB 1.0 data output to a computer. A Ni-MH pack (1.2V × 4 cells, 1650 mAh, 4.8V DC) gives about 12 hours of use from a roughly 3-hour charge and can be recharged more than 300 times. Three dedicated spring joint sockets (AJ-150 / AJ-50 / AJ-15K), a charger and a carrying case are supplied. A product demonstration video is available here.

Key Features

Typical Applications

Electronics and appliance assembly, 3C products (mobile phones, notebooks, digital cameras), automotive parts, home appliances, and metal / plastic screw-fastening processes. Applicable to shut-off electric screwdrivers, semi-automatic electric screwdrivers, torque screwdrivers and torque wrenches for torque setting, daily point checks and outgoing inspection.

Model Selection & Reference Figures

Six KTM models are available; choose the one that puts the tool's torque in the 20%–80% band: KTM-6 (0.02–8 kgf·cm) for micro screws; KTM-15 (0.15–15) for small electric drivers; KTM-50S (0.5–50), dedicated to semi-automatic drivers; KTM-150 (1.5–150) for small-to-medium torque; KTM-250 (3–250) and KTM-1000 (50–1000) for high-torque tools and torque wrenches. If the reading sits near a boundary, choose the next range up to protect the transducer. Dimensions 230 (W) × 125 (D) × 65 (H) mm, about 1.8 kg; charger input AC100–240V 50/60Hz, output DC12V 400mA. Do not use the KTM series with pneumatic (impact) drivers, never exceed the maximum measuring range, and do not measure while charging.

Frequently Asked Questions

Q: Can it test pneumatic screwdrivers?
A: No. The KTM series is not suitable for pneumatic / impact drivers — only shut-off and semi-automatic electric drivers. Never apply torque above the maximum range, as this can damage the sensor.

Q: What is a spring joint and how is it selected?
A: A spring joint (Screw Joint) absorbs the torque at the bit tip. Each range uses a joint of a different stiffness, supplied as standard with the instrument and available separately. Re-calibrate after changing joints; the same driver may read differently on another joint because of the spring characteristic.

Q: Can data be exported to a PC?
A: Yes, via the USB 1.0 interface with the optional cable and software. The USB port is for data only, not charging.

Service & Support

Guangzhou Yunke Electronic Co., Ltd. supplies the full KILEWS KTM range with selection advice, quotations, demonstrations, spare spring joints and after-sales support.

Specification Sources

Values above are transcribed from the official KILEWS KTM-150 specification sheet; no values have been converted or rewritten. This is a quotation-only catalogue and no prices are listed.

For a quotation, lead time, a demonstration or a spare spring joint, please contact our engineers.

Related Products

KILEWS SKP-C32HL Torque Testers
Torque Testers

KILEWS SKP-C32HL Torque Testers

SKP-C32HL
└ KILEWS (Taiwan, China)
KILEWS SKP-32HL Torque Testers
Torque Testers

KILEWS SKP-32HL Torque Testers

SKP-32HL
└ KILEWS (Taiwan, China)
KILEWS SKP-32HL-60W(N) Torque Testers
Torque Testers

KILEWS SKP-32HL-60W(N) Torque Testers

SKP-32HL-60W(N)
└ KILEWS (Taiwan, China)
KILEWS SKC-LB0730S Torque Testers
Torque Testers

KILEWS SKC-LB0730S Torque Testers

SKC-LB0730S
└ KILEWS (Taiwan, China)
KILEWS SKC-LB1030S Torque Testers
Torque Testers

KILEWS SKC-LB1030S Torque Testers

SKC-LB1030S
└ KILEWS (Taiwan, China)
KILEWS SKC-LB1430 Torque Testers
Torque Testers

KILEWS SKC-LB1430 Torque Testers

SKC-LB1430
└ KILEWS (Taiwan, China)