IMADA ZTA-50N Force Gauges (Model ZTA-50N) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA ZTA-50N Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | ZTA-50N |
|---|---|
| Rated Capacity | 50N |
| Displayed Value | 50.00N |
| Resolution | 0.01N |
| Kgf Level Display | 5kgf × 0.001kgf |
| Measurement Type | Force, Pressure Force (Dual toward Measurement) |
| Accuracy | ±0.2% F.S. ±1 digit |
| Sampling Rate | Maximum 2000 times / s (U Disk Memory optional 1 / 50 / 100 times per s) |
| Display Screen | 4 digits with No. with Unit EL(OLED) Height to than degrees Display |
| Display Update Rate | 16 times / s |
| Measuring Unit | N(<5N switchable mN; ≥1000N switchable kN), kgf, lbf |
| Test Shaft Thread | M6(Height Capacity Type M10) |
| Built-in Memory | 1000 groups Measurement Data (Non- ) |
| U Disk Memory | supports Direct Continuous Data to U Disk (ZTA Dedicated Functions) |
| Displacement Functions | supports Displacement Input Output, can Connection Displacement Meter Load - Displacement Wire (ZTA Dedicated Functions) |
| Peak Functions | Peak Hold ( / Pressure ), 1st / 2nd Peak Detection, Load Peak Displacement Detection, Specified Load Displacement digits |
| Judgment Function | three class Comparison Device (-NG / OK / +NG), LED Display + Signal Output |
| Signal Output | USB, RS232C, Mitutoyo Digimatic, ±2VDC Analog Output (D / A), three class Comparison Output, Overload Warning, two class Comparison Device |
| External Input | / Zero Setting digits / Peak Open - Setting |
| Other functions | Multi Display (above under two class Selection Display), Display Screen Display Rotation, No. Rotation, Zero Clear Meter when Device, +NG Alarm, Auto Power-off Meter when Device, Sensitivity Setting, Day Display, Setting Setting |
| Overload Specifications | Safe Overload Approx. 200% F.S.; Over Over Full Scale 110% Trigger Display and Alarm |
| Power Supply | Rechargeable Battery (Full Approx. 2 hours) Continuous Operating Approx. 8 hours, standard AC Adapter |
| Operating Environment | Temperature 0~40℃, Humidity 20~80% RH(non-condensing) |
| Body Weight | Approx. 490g(not Same Range with Difference ) |
| Standard Accessories | AC Adapter, USB Cable, Test , Driver Light Disk (incl. Force Logger Data Recording Software), Test Accessories (A1~A8), Box, USB internal Adapter |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Model | Capacity | Displayed Value | Resolution | kgf file display | Test Axis_BAR__Reference_T |
|---|---|---|---|---|---|
| ZTA-2N | 2N | 2.000N(2000mN) | 0.001N(1mN) | 200gf × 0.1gf | M6 |
| ZTA-5N | 5N | 5.000N(5000mN) | 0.001N(1mN) | 500gf × 0.1gf | M6 |
| ZTA-20N | 20N | 20.00N | 0.01N | 2kgf × 0.001kgf | M6 |
| ZTA-50N | 50N | 50.00N | 0.01N | 5kgf × 0.001kgf | M6 |
| ZTA-100N | 100N | 100.0N | 0.1N | 10kgf × 0.01kgf | M6 |
| ZTA-200N | 200N | 200.0N | 0.1N | 20kgf × 0.01kgf | M6 |
| ZTA-500N | 500N | 500.0N | 0.1N | 50kgf × 0.01kgf | M6 |
| ZTA-1000N | 1000N | 1000N(1.000kN) | 1N(0.001kN) | 100kgf × 0.1kgf | M6 |
| ZTA-2500N | 2500N | 2500N(2.500kN) | 1N(0.001kN) | 250kgf × 0.1kgf | M10 |
| ZTA-5000N | 5000N | 5000N(5.000kN) | 1N(0.001kN) | 500kgf × 0.1kgf | M10 |
Q: What's the difference between ZTA and ZTS? Q: Q: Q
A: The two measurements (0.2%F.S.), resolution, 2000Hz sampling rates are fully consistent. 0.2%F.SZTA is a high-end versionwith an additional 1st/ 2nd peak detection, U Disk directly stored, and a shift input output (which can be made to the Hz-bit shift curve) to the secondary subcomparisoner; ZTS is the standard version._Standing_Face _St_St_St_St_St_St_St_St_St_St_St_St_St_S The data is required to shift or to be recorded off a computer, selecting ZTA
Q: Can ZTA offline store test data?
A: Yes. Inserting a U-disk will allow continuous measurements to be saved directly to the U-disk (sustain frequency is optional for 1 / 50 / 100 per second), without requiring a connection to the computer;_Scope_Screech_Screaks_Scope_Scope_Scope_Scope_Scope_Treats_Text_Scope_Scre There is also a 1000 data storage space on board. Note that the U-disk works faster than battery consumption
Q: How to measure the charge weight-position shift curve?
A: ZTA support for the migration input, with a separate IMADA migration (e.g., the DMK series linear ruler) and an accompanying cable, The real-time HV-bit shift curve can be drawn in conjunction with the ulazer software; the FSA series force-bit shift measurement module can also be selected directly
Q: What happens when you get overloaded?!
A: Warning and alarm sound on screen when load exceeds full mass 110%; instrument is safely overloaded about 200%F.S. but long-term overloads damage sensors, The selection is recommended to keep the daily test effort in the full range of 20%80%..Screaks
Q: What about the ten model?!?
A: Routine test landing at full capacity 20 per cent ~ 80 per cent Selection: micro-dots (keys, connectors, wires) with ZTA-2N/ ZTA-5N/ ZTA-20N; General (plugged, detached) with ZTA-50N/ ZTA-100N; hardware with ZTA-200N/ ZTA-500N; hardened, steel, steel Material samples, for example, use ZTA-1000N/ ZTA-2500N/ ZTA-5000N. Selecting a lot of micro-power only loses resolution and does not "vow big" 9
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.