Home › Products

Product Overview

IMADA ZTA-2500N Force Gauges (Model ZTA-2500N) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA ZTA-2500N Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.

Brand: IMADA | Category: Force Gauges

Sales Inquiries: 15626018696 · 78403603@qq.com

IMADA ZTA-2500N Force Gauges

Technical Specifications

ModelZTA-2500N
Rated Capacity2500N
Displayed Value2500N(2.500kN)
Resolution1N(0.001kN)
Kgf Level Display250kgf × 0.1kgf
Measurement TypeForce, Pressure Force (Dual toward Measurement)
Accuracy±0.2% F.S. ±1 digit
Sampling RateMaximum 2000 times / s (U Disk Memory optional 1 / 50 / 100 times per s)
Display Screen4 digits with No. with Unit EL(OLED) Height to than degrees Display
Display Update Rate16 times / s
Measuring UnitN(<5N switchable mN; ≥1000N switchable kN), kgf, lbf
Test Shaft ThreadM10(Height Capacity Type M10)
Built-in Memory1000 groups Measurement Data (Non- )
U Disk Memorysupports Direct Continuous Data to U Disk (ZTA Dedicated Functions)
Displacement Functionssupports Displacement Input Output, can Connection Displacement Meter Load - Displacement Wire (ZTA Dedicated Functions)
Peak FunctionsPeak Hold ( / Pressure ), 1st / 2nd Peak Detection, Load Peak Displacement Detection, Specified Load Displacement digits
Judgment Functionthree class Comparison Device (-NG / OK / +NG), LED Display + Signal Output
Signal OutputUSB, RS232C, Mitutoyo Digimatic, ±2VDC Analog Output (D / A), three class Comparison Output, Overload Warning, two class Comparison Device
External Input/ Zero Setting digits / Peak Open - Setting
Other functionsMulti Display (above under two class Selection Display), Display Screen Display Rotation, No. Rotation, Zero Clear Meter when Device, +NG Alarm, Auto Power-off Meter when Device, Sensitivity Setting, Day Display, Setting Setting
Overload SpecificationsSafe Overload Approx. 200% F.S.; Over Over Full Scale 110% Trigger Display and Alarm
Power SupplyRechargeable Battery (Full Approx. 2 hours) Continuous Operating Approx. 8 hours, standard AC Adapter
Operating EnvironmentTemperature 0~40℃, Humidity 20~80% RH(non-condensing)
Body WeightApprox. 490g(not Same Range with Difference )
Standard AccessoriesAC Adapter, USB Cable, Test , Driver Light Disk (incl. Force Logger Data Recording Software), Test Accessories (B1~B8), Box, USB internal Adapter

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

ModelCapacityDisplayed ValueResolutionkgf file displayTest Axis_BAR__Reference_T
ZTA-2N2N2.000N(2000mN)0.001N(1mN)200gf × 0.1gfM6
ZTA-5N5N5.000N(5000mN)0.001N(1mN)500gf × 0.1gfM6
ZTA-20N20N20.00N0.01N2kgf × 0.001kgfM6
ZTA-50N50N50.00N0.01N5kgf × 0.001kgfM6
ZTA-100N100N100.0N0.1N10kgf × 0.01kgfM6
ZTA-200N200N200.0N0.1N20kgf × 0.01kgfM6
ZTA-500N500N500.0N0.1N50kgf × 0.01kgfM6
ZTA-1000N1000N1000N(1.000kN)1N(0.001kN)100kgf × 0.1kgfM6
ZTA-2500N2500N2500N(2.500kN)1N(0.001kN)250kgf × 0.1kgfM10
ZTA-5000N5000N5000N(5.000kN)1N(0.001kN)500kgf × 0.1kgfM10

Key Advantages

  1. 2000Hz High-speed samplingcapture instant peaks and brittle fractures, and the normal force gauge captures peaks that cannot be captured
  2. U Disk Direct StorageThe continuous recording of test data without a computer is easier for spot-checking and long ageing tests. —
  3. Support for Offset Input Outputthe contour shift is made to make the weight-bit shift curve, assessing material rigidity, spring properties, and stripping
  4. The 1st/ 2nd peak test can record the first peak and the subsequent maximum peaks separately and is suitable for assessing the break-up process and plasticized materials
  5. A three-tier comparison (-NG / OK / +NG) with colour LED and signal output allows for a waiver of manual interpretation from the PLC feed automation
  6. The OLED organic EL screen, which is as clear as the dark environment readings, supports screen invertion with symbols
  7. A fully automated pull pressure test system can be developed with the IMADA MX series of electric test stations and the utanger software

Applied industry & test project

  • Industry: Electronics, plastics, packaging, medical devices, auto parts, cable, textiles, scientific research institutes —
  • Test: End plug-in, key pressure, switch hand perception, detachment, tape glue, product damage intensity, spring-spring strength, bottle cap opening, welding strength, material stretching and compression test

FAQ

Q: What's the difference between ZTA and ZTS? Q: Q: Q

A: The two measurements (0.2%F.S.), resolution, 2000Hz sampling rates are fully consistent. 0.2%F.SZTA is a high-end versionwith an additional 1st/ 2nd peak detection, U Disk directly stored, and a shift input output (which can be made to the Hz-bit shift curve) to the secondary subcomparisoner; ZTS is the standard version._Standing_Face _St_St_St_St_St_St_St_St_St_St_St_St_St_S The data is required to shift or to be recorded off a computer, selecting ZTA

Q: Can ZTA offline store test data?

A: Yes. Inserting a U-disk will allow continuous measurements to be saved directly to the U-disk (sustain frequency is optional for 1 / 50 / 100 per second), without requiring a connection to the computer;_Scope_Screech_Screaks_Scope_Scope_Scope_Scope_Scope_Treats_Text_Scope_Scre There is also a 1000 data storage space on board. Note that the U-disk works faster than battery consumption

Q: How to measure the charge weight-position shift curve?

A: ZTA support for the migration input, with a separate IMADA migration (e.g., the DMK series linear ruler) and an accompanying cable, The real-time HV-bit shift curve can be drawn in conjunction with the ulazer software; the FSA series force-bit shift measurement module can also be selected directly

Q: What happens when you get overloaded?!

A: Warning and alarm sound on screen when load exceeds full mass 110%; instrument is safely overloaded about 200%F.S. but long-term overloads damage sensors, The selection is recommended to keep the daily test effort in the full range of 20%80%..Screaks

Q: What about the ten model?!?

A: Routine test landing at full capacity 20 per cent ~ 80 per cent Selection: micro-dots (keys, connectors, wires) with ZTA-2N/ ZTA-5N/ ZTA-20N; General (plugged, detached) with ZTA-50N/ ZTA-100N; hardware with ZTA-200N/ ZTA-500N; hardened, steel, steel Material samples, for example, use ZTA-1000N/ ZTA-2500N/ ZTA-5000N. Selecting a lot of micro-power only loses resolution and does not "vow big" 9

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

IMADA ZTS-LM-20kN Force Gauges
Force Gauges

IMADA ZTS-LM-20kN Force Gauges

ZTS-LM-20kN
└ IMADA (Japan)
IMADA ZTS-LM-10kN Force Gauges
Force Gauges

IMADA ZTS-LM-10kN Force Gauges

ZTS-LM-10kN
└ IMADA (Japan)
IMADA ZTS-LM-5000N Force Gauges
Force Gauges

IMADA ZTS-LM-5000N Force Gauges

ZTS-LM-5000N
└ IMADA (Japan)
IMADA ZTS-LM-2000N Force Gauges
Force Gauges

IMADA ZTS-LM-2000N Force Gauges

ZTS-LM-2000N
└ IMADA (Japan)
IMADA ZTS-LM-1000N Force Gauges
Force Gauges

IMADA ZTS-LM-1000N Force Gauges

ZTS-LM-1000N
└ IMADA (Japan)
FeaturedIMADA ZTS-LM-500N Force Gauges
Force Gauges

IMADA ZTS-LM-500N Force Gauges

ZTS-LM-500N
└ IMADA (Japan)