IMADA ZTS-1000N Force Gauges (Model ZTS-1000N) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA ZTS-1000N Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model Series | ZTS-1000N(ZTA is Height with Version This) |
|---|---|
| Rated Capacity | 1000N |
| Displayed Value | 1000N(1.000kN) |
| Resolution | 1N(0.001kN) |
| Kgf Level Display | 100.0kgf × 0.1kgf |
| Measurement Type | Force, Pressure Force (Dual toward Measurement) |
| Accuracy | ±0.2%F.S. ±1digit |
| Sampling Rate | Maximum 2000 times / s |
| Test Shaft Thread | M6 |
| Body Weight | Approx. 490g |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Item | Specification |
|---|---|
| Model | ZTS-1000N |
| Measurement Type | Pull, compression (two-way measurements) — |
| Accuracy | ±0.2%F.S. ±1digit |
| Sampling Rate | Maximum 2000 times/ seconds.Split%1SplitSp |
| Display Screen | 4 Bit Organic EL (OLED) High Contrast DisplayScreaks |
| Display Update Rate | 16 times/ seconds |
| Measuring units | N, kof, lbf toggleable |
| Built-in Memory | 1000 group measurements |
| Overload Specifications | Safely overloaded 200 %FS; load 110 % FS, sound alarm |
| Decision function | Compare output with upper and lower limits, OK/ +NG/-NG III |
| Signal Output | USB, Simulation 1 VDC, Ddiman, Comparative Output2 |
| Power | Charged battery, full of approximately 2 hours; continuously using approximately 8 hours, marked with AC adapter |
| Operating Environment | Temperature 0 ~ 40°C, humidity 20 ~ 80 % RH (no condensation) |
| Body Weight | Approx. 490g (type 1000N and below) |
| Model | Capacity | Resolution |
|---|---|---|
| ZTS-2N | 2N | 0.001N(1mN) |
| ZTS-5N | 5N | 0.001N(1mN) |
| ZTS-20N | 20N | 0.01N |
| ZTS-50N | 50N | 0.01N |
| ZTS-100N | 100N | 0.1N |
| ZTS-200N | 200N | 0.1N |
| ZTS-500N | 500N | 0.1N |
| ZTS-1000N | 1000N(1.000kN) | 1N(0.001kN) |
| ZTS-2500N | 2500N(2.5kN) | 1N |
| ZTS-5000N | 5000N(5kN) | 1N |
Q: is ZTS-1000N the largest in the ZTS series?  
A: ZTS standard type covers 2N — 1000N, which is the maximum standard; standard maximum; The higher volume requires either a high-test heavy machine type ZTS-2500N or a ZTS-5000N (more heavy and slightly less re-routed). Reference: ZTS-1000N
Q: ZTS-1000N and ZTS-500N How?  
A: ZTS-500N: 500N Capacity / 0.1N Resolution; ZTS-1000N: 1000N Capacity / 1N Resolution. /S Resolution.Six-Sixty-Sixty-Sixty-Sixty-Sixty-Sixty-Sixty-Sixty-Six-Sixty-Six-S The measure is often greater than 500N for ZTS-1000N and the refinement of readings for ZTS-500N
Q: can KN be displayed for ZTS-1000N?  
A: Yes, 1000N machine support N and kN switch display (1000N/ 1.000kN) & kof file display 100.0kgf
Q: What's the difference between ZTS and ZTA? Q: ZTS and ZTA? Q: Q: Q
A: ZTS is standardZTA High-end Add Input Output, U Disk Storagethe remaining measurements are consistent and sampling rates are consistent
Q: Can you directly connect to computer power - Bit Shift curve?  
A: ZTS for uploading power value data from USB; remote location transfer sensor for locational acquisition, ZTA for native support for remote location signal access
Q: Can you load it on the electric test table? Q: Q: Q: Q: Q: Q
A: Supported, with the support of the IMADA MX series of electric motors, automatically tested, judged OK/NG
Q: What's the over-carriage alarm?  
A: Exceeding the flash alarm with a mass exceeding 110%, with a maximum capacity of 200 % (not recommended for long-term overload)
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.