Home › Products

Product Overview

ZDP-5 Torque Testers (Model ZDP-5) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. ZDP-5 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: See datasheet | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

ZDP-5 Torque Testers

Technical Specifications

ModelZDP-5
Maximum Load5.000 kgf·cm|0.500 N·m|4.340 Lbf·in
Minimum Reading0.001 kgf·cm|0.001 N·m|0.001 Lbf·in
Accuracy±0.2%(Full Scale FS) or ±1 digit
Measuring Unitkgf · cm, N · m(N · cm), Lbf · in, switchable
Display4 digits LCD Display (Device, Mode, Over Load LED, Comparison LED), can Rotation
Sampling Rate1000 times / s
Display More10 times / s
Capability200% Full Scale (Over Over 110% when LED and Alarm)
A / D Rotation Device24 digits Signal
Micro Processing Device8 digits Micro Processing Single Element
Peak Holdwhen Needle Torque, when Needle Torque can Hold
Than Functionscan Setting with Height / Low Setting points, OK / +NG Judgment
Data Storage1000 groups Measured values
Automatic FunctionsAutomatic Zero (1.0~25.5 s Adjustable); Automatic Electric 5 / 10 / 30 / 60 minutes optional
Data InterfaceRS232-C, USB(Data Cable and Software optional), can Connection Electric Statistics Analysis, Guide Output Excel
ExternalDisplay Hold, Zero, Peak / Switching
Power Supplybuilt-in 4 cells AA Ni-MH Rechargeable Battery; AC Adapter 100~240V(50 / 60Hz)
Charging timeApprox. 10 hours ( Full can Continuous Operating Approx. 16 hours)
Operating EnvironmentTemperature 0~+40℃, Humidity 20~80% RH(Relative Humidity)
Dimensions220.5(Length)× 78(Width)× 32.3(Height)mm
Total WeightApprox. 520g
Standard Accessoriesdigits Bit #0 / #1 / #2, Multi Connection Wire, Case, AC Adapter, Operating Instructions, Calibration Certificate (Software and RS232-C Data Cable )

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

ModelMax. kgf cmMax. N.m.%1Max..Lbf.inAssMinimum readings kgf cm
ZDP-55.0000.5004.3400.001
ZDP-1010.001.0008.6800.01
ZDP-2020.002.00017.360.01
ZDP-5050.005.00043.400.01
ZDP-100100.010.0086.800.1
ZDP-200200.020.00173.60.1

Key Advantages

  1. 0.2% Full engraved high accuracy24 bit A/D conversion + 1000 sub/sec sampling, peak capture is reliable
  2. Host and Sensor%Separate designsensor belt 6.35mm for a six-angle batch, which can be measured by hand-held direct screwScret
  3. 4 bit LCD can be flipped and the screen belt is reversed, and visualally judging whether the screw is stung or untiedAssight
  4. Internal storage of 1000 group measurements, setting a high and low limit with colour code, +NG sound
  5. Specifications: RS232-C USB SPC. Please contact our engineers for the full technical wording.
  6. Metal shell + human machine handle, full-time, about 520g, thick 32.3mm, long-duration line inspection.Screllage —

Applied trade & test object

Electronics, mobile phones and digital assembly, car parts, hardware screws, plastic screws, medical equipment assembly; screw-twig and loose torque measurements applicable to screws/ screws, screw-free detection and strength testing, Or torque monitoring (ZDP host can export signals to PLC) on the device that automatically tightens it

FAQ

Q: What is the minimum reading for ZDP-5, and what is the screw?

A: Minimum reading 0.001 kgf cm (0.001 N·m / 0.001 Lbf in) Maximum load 5.000 kgf cm (0.500 N·m / 4.340 Lbf in); It is recommended that the daily measurement torque should be dropped in the 20%-80% in 5.000 kgf. cm, with the most steady readings

Q: What is the difference between the ZDP series and the HP series, and the M series of the Torque Test?

A: ZDP YesHandheld numbers show a twisterthe host is separated from the sensor and the batch is directly screwdriverd to detect it on-site; HP/ M series isDesktop tox testerwhich is used to calibrate the tools of the electric lift, the torque screwr, the torque wrench, etc.. The actual twisting torque on the worksheets selects ZDP, and the precision of the tool is selected HP/ M.Screen.Screech.Screws.Screws.Screws.s.Screws.Scuses.Sc

Q: What about the ZDP six model?

A: Routine to the quantum 20 per cent ~ 80 per cent Select: ZDP-5 (5 kgf cm, minimum reading 0.001, tiny precision screw), ZDP-10 (10 kgf.cm), ZDP-20 (20 kgf.cm), ZDP-50 (50 kgf.cm), Qatar China South Sudan South Sudan South Sudan China ZDP-100 (100 kgf.cm), ZDP-200 (200 kgf.cm, max.) can be switched to three units, and the number of units is not as high as the number of units. Q. Q. Q. Q. Q. Q. The selection can also be matched by N.m (0.5/ 1/ 2/ 5/ 10/ 20 N·m). /S / ).SSSSSSS

Q: Can you export data with a computer?

A: Yes. The instrument contains the 1000 group data storage, throughRS232-C or USBConnect computers (data lines and software are selected), supported software can be tabulatored, drawn, statistically calculated and exported

Q: Can you measure the clockwise needles? Is the excess process bad? Q

A: Scintillation and bellicing of LED at loads exceeding 110%, Maximum affordable 200% full mass (not recommended for long-term overload).Screen_w_o_o

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

HMS18V-2.5 Torque Testers
Torque Testers

HMS18V-2.5 Torque Testers

HMS18V-2.5
└ MOTIVE (Taiwan, China)
HMS18V-6 Torque Testers
Torque Testers

HMS18V-6 Torque Testers

HMS18V-6
└ MOTIVE (Taiwan, China)
HMS18V-8 Torque Testers
Torque Testers

HMS18V-8 Torque Testers

HMS18V-8
└ MOTIVE (Taiwan, China)
HMS18V-12 Torque Testers
Torque Testers

HMS18V-12 Torque Testers

HMS18V-12
└ MOTIVE (Taiwan, China)
FGM-400N.m Torque Testers
Torque Testers

FGM-400N.m Torque Testers

FGM-400N.m
└ MOTIVE (Taiwan, China)
FGM-200N.m Torque Testers
Torque Testers

FGM-200N.m Torque Testers

FGM-200N.m
└ MOTIVE (Taiwan, China)