IMADA DTXS-2N Torque Testers (Model DTXS-2N) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA DTXS-2N Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | DTXS-2N |
|---|---|
| Rated Capacity | 2 N·m(200 N·cm / 20 kgf·cm) |
| Displayed Value | 2.000 N·m(200.0 N·cm) |
| Resolution | 0.001 N·m(0.1 N·cm) |
| Accuracy | ±0.5% F.S. ±1 digit |
| Measurement Type | Rotatable Torque Measurement ( Open CCW / CW Dual toward) |
| Measuring Unit | N · m, N · cm, kgf · m, kgf · cm, lbf · in, ozf · in(six Type Unit switchable) |
| Sampling Rate | Maximum 2000 Data / s ( USB Output, can Same Output Continuous Data and Non- only Peak) |
| Display Screen | 4 digits with Unit EL(OLED) Height to than degrees Display, three Division Customisable Display (Torque Value / Peak / Unit / Judgment ) |
| Display Update Rate | 10 times / s |
| Measurement mode | Real-time Mode / Peak Hold Mode optional ( when Needle, when Needle can Measure) |
| Peak Functions | Peak Hold ( Open Peak, Peak) |
| Judgment Function | three class Comparison Device (-NG / OK / +NG): Low at Lower Limit , internal , Height at Upper Limit LED, with and Signal Output |
| Built-in Memory | 1000 groups Measurement Data |
| Auto Zero | 1.0~60 s optional |
| Overload Specifications | Safe Overload Approx. 200% F.S.; Over Over Full Scale Approx. 110% Trigger Display and Alarm |
| Signal Output | USB( COM Port), RS-232C, Mitutoyo Digimatic, ±2VDC Analog Output (D / A), three class Comparison Output, Overload Alarm |
| External Input | SEND(Connection points Hold), Zero Setting digits, Peak Open / Setting |
| Clamping Range | Standard Operating units ø20~160mm(0.787″~6.30″); optional Small Operating units ø7~50mm(0.275″~2″) |
| Operating Unit | Standard Type Operating units DT-TB, Maximum Torque 10 N · m, Fixed is not Steel external |
| Display Language | 8 Type (, , , in Text, , Large , , Day ) |
| Power Supply | built-in Ni-MH Rechargeable Battery + AC Adapter (Input 100~240V); Continuous Operating Approx. 8 hours, Full Approx. 10 hours |
| Operating Environment | Temperature 0~40℃, Humidity 20~80% RH(non-condensing) |
| Dimensions | Approx. W233 × D305 × H87 mm(excluding Operating units and ) |
| Body Weight | Approx. 4.5kg(incl. Standard Operating units and 4 pcs Standard ) |
| Standard Accessories | 4 pcs 1 in Standard , AC Adapter / Charger, USB Cable, Driver Light Disk (incl. Force Logger Data Recording Software), Hardness Housing Case, L Type Wrench, Check Certificate |
| Applicable Standard | JIS S 0022(2001) Open Test Method 6.3「 Port Capacity Device 」 |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Model | Rated capacity | N.C.C. Test | Displayed Value | Resolution | kgf cmcm |
|---|---|---|---|---|---|
| DTXS-0.5N | 0.5 N·m | 50 N·cm | 50.00 N·cm(0.500 N·m) | 0.01 N·cm(0.001 N·m) | 5.000 kgf·cm × 0.001 |
| DTXS-2N | 2 N·m | 200 N·cm | 2.000 N·m(200.0 N·cm) | 0.001 N·m(0.1 N·cm) | 20.00 kgf·cm × 0.01 |
| DTXS-5N | 5 N·m | 500 N·cm | 5.000 N·m(500.0 N·cm) | 0.001 N·m(0.1 N·cm) | 50.00 kgf·cm × 0.01 |
| DTXS-10N | 10 N·m | 1000 N·cm | 10.00 N·m(1000 N·cm) | 0.01 N·m(1 N·cm) | 100.0 kgf·cm × 0.1 |
Q: What's the difference between DTXS and DTXA? Q: Q: Q
A: The two measurements (0.5%F.S.), resolution, 2000Hz sampling rates are fully consistent. 0.5%F.SDTXA is a high function typewith extra angle (steaking) input output, to make torque-angle analysis, 1st/ 2nd double peak detection, Measurement data are stored directly on U discs (optional per second for 1 / 50 / 100) and secondary subcomparisons; DTXS is a standard type and more affordable, The daily caps open/ closed bolt torque test is sufficient.Trangle-angle curve or exit from a continuous computer record is selected for DTXA..TracksStightsSt
Q: What about the four model?!?
A: Select the daily test tot to fall on the full volume 20%80%. the pill bottle, small caliber cosmetic cap, lipstick tube, etcDTXS-0.5N(0.5 N·m); beverage bottles, regular plastic bottles, solar bottle cap selection)DTXS-2N(2 N·m, most commonly used); large-calibre caps, tight container selectionDTXS-5N(5 N·m); selected for industrial tanks, drums or larger surplusDTXS-10N(10 N·m). A lot of options for a little torque can be lost in the sense of dissimilarity, not "supply."sStance
Q: Which packagings can be measured and what range of containers are held?
A: detectable engrains for various types of screws, such as PET plastic bottles, glass bottles, cans, toothpaste tubes, lipstick tubes, vials, drum containers, etc. / closed strangles, key turn, button twist, Small parts break the torque. Standard workstations are equipped with 20 ~ 160mm; small workstations are designed to cover small caliber samples from 7 ~ 50mm,Stamps, 50mmStamps, Standards, Stamps, Stamps, , Standard There are also different lengths and material cut-off nails.!
Q: How do you export data to computers?!??
A: Marked USB cable, used as a virtual COM port with a klo-vy data recording software, capture rate 10 data/sec, Direct storage of CSV and automatic recording of maximum and minimum values; there is also a 1000 group stored on the machine for downloading in ex post._ A real-time torque curve (up to 2000Hz) is required to be matched with the ulaander software._w_w_w_w_w
Q: How does accuracy guarantee? What happens when you overload?!?
A: Accuracy 0.5% F.S. 1 digit, 2000Hz high-speed sampling avoids missing instantaneous peaks; instrumentation carries sample weights using a axis carrying agency, Reduces the impact of self-weight on readings. A screen alarm is issued when loads exceed the full range of about 110%, and the load is securely overloaded of about 200%F.S., but long-term overloads damage sensors are recommended to leave sufficient surplus when the configuration is selected
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.