Home › Products

Product Overview

IMADA DTXS-5N Digital Cap Torque Tester (Model DTXS-5N) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA DTXS-5N digital cap torque tester, 5 N.m, 0.001 N.m resolution, 2000 Hz sampling, 1000-data memory, three-level comparator.

Brand: IMADA | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

IMADA DTXS-5N Digital Cap Torque Tester

Technical Specifications

ModelDTXS-5N
Rated Capacity5 N·m(500 N·cm / 50 kgf·cm)
Displayed Value5.000 N·m(500.0 N·cm)
Resolution0.001 N·m(0.1 N·cm)
Accuracy±0.5% F.S. ±1 digit
Measurement TypeRotatable Torque Measurement ( Open CCW / CW Dual toward)
Measuring UnitN · m, N · cm, kgf · m, kgf · cm, lbf · in, ozf · in(six Type Unit switchable)
Sampling RateMaximum 2000 Data / s ( USB Output, can Same Output Continuous Data and Non- only Peak)
Display Screen4 digits with Unit EL(OLED) Height to than degrees Display, three Division Customisable Display (Torque Value / Peak / Unit / Judgment )
Display Update Rate10 times / s
Measurement modeReal-time Mode / Peak Hold Mode optional ( when Needle, when Needle can Measure)
Peak FunctionsPeak Hold ( Open Peak, Peak)
Judgment Functionthree class Comparison Device (-NG / OK / +NG): Low at Lower Limit , internal , Height at Upper Limit LED, with and Signal Output
Built-in Memory1000 groups Measurement Data
Auto Zero1.0~60 s optional
Overload SpecificationsSafe Overload Approx. 200% F.S.; Over Over Full Scale Approx. 110% Trigger Display and Alarm
Signal OutputUSB( COM Port), RS-232C, Mitutoyo Digimatic, ±2VDC Analog Output (D / A), three class Comparison Output, Overload Alarm
External InputSEND(Connection points Hold), Zero Setting digits, Peak Open / Setting
Clamping RangeStandard Operating units ø20~160mm(0.787″~6.30″); optional Small Operating units ø7~50mm(0.275″~2″)
Operating UnitStandard Type Operating units DT-TB, Maximum Torque 10 N · m, Fixed is not Steel external
Display Language8 Type (, , , in Text, , Large , , Day )
Power Supplybuilt-in Ni-MH Rechargeable Battery + AC Adapter (Input 100~240V); Continuous Operating Approx. 8 hours, Full Approx. 10 hours
Operating EnvironmentTemperature 0~40℃, Humidity 20~80% RH(non-condensing)
DimensionsApprox. W233 × D305 × H87 mm(excluding Operating units and )
Body WeightApprox. 4.5kg(incl. Standard Operating units and 4 pcs Standard )
Standard Accessories4 pcs 1 in Standard , AC Adapter / Charger, USB Cable, Driver Light Disk (incl. Force Logger Data Recording Software), Hardness Housing Case, L Type Wrench, Check Certificate
Applicable StandardJIS S 0022(2001) Open Test Method 6.3「 Port Capacity Device 」

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

The IMADA DTXS-5N is the standard model of the Japanese IMADA DTXS series of digital cap torque testers. With a rated capacity of 5 N·m (500 N·cm / 50 kgf·cm), a resolution of 0.001 N·m (0.1 N·cm) and an accuracy of ±0.5% F.S. ±1 digit, it measures both the opening (counter-clockwise, CCW) and closing (clockwise, CW) torque of screw-top containers. Sampling at up to 2000 Hz captures the momentary peak as a seal releases — a value slower instruments miss — which makes it well suited to establishing opening-torque standards.

A bearing-supported load mechanism carries the weight of the container so the bottle's own mass does not bias the reading. Real-time and peak-hold modes are both available, with 1000 readings stored on board and USB, RS-232C, Mitutoyo Digimatic, ±2VDC analogue and comparator outputs. The supplied Force Logger software exports CSV. A three-level comparator (-NG / OK / +NG) drives orange / green / red LEDs and a buzzer.

Key Features

Typical Applications

Beverages and drinking water, food packaging, pharmaceuticals, household chemicals and cosmetics, container manufacturing, third-party test labs and universities. Measurements include cap opening torque, closing torque, seal-consistency sampling, lipstick rotation force, key-turn force, knob operating force and small-part breakaway torque on PET bottles, glass bottles, cans, toothpaste tubes, lipstick tubes, vials and drums.

Model Selection & Reference Figures

Four capacities are offered; keep routine readings in the 20%–80% band of full scale. The DTXS-0.5N (0.5 N·m) suits vials, small cosmetic caps and lipstick tubes; the DTXS-2N (2 N·m) is the most general choice for drink and household bottles; the DTXS-5N (5 N·m) covers large or tightly closed caps; the DTXS-10N (10 N·m) suits industrial drums or applications needing headroom. Choosing an oversized range for small torque loses resolution. The DTXA high-function version shares the same ±0.5% F.S., resolution and 2000Hz sampling but adds angle (displacement) input / output for torque-angle analysis, 1st / 2nd dual peak detection, direct USB-memory logging (1 / 50 / 100 samples per second) and a secondary sub-comparator; choose DTXS-5N for routine open / close torque and DTXA only when torque-angle curves or untethered logging are required.

Frequently Asked Questions

Q: What containers and sizes can be clamped?
A: Screw-top PET and glass bottles, cans, tubes, vials and drums. The standard table holds ø20–160 mm; the optional small table covers ø7–50 mm, and pins of various lengths and materials are available.

Q: How is data exported?
A: The supplied USB cable presents a virtual COM port; Force Logger records at 10 data per second directly to CSV with automatic MAX / MIN logging, and the internal 1000-data memory can be downloaded later. Force Recorder (optional) provides real-time torque curves up to 2000Hz.

Q: How is accuracy protected against overload?
A: Accuracy is ±0.5% F.S. ±1 digit. An on-screen alarm and buzzer trigger at about 110% of full scale, with a safe overload of about 200% F.S.; repeated overloading damages the sensor, so leave adequate range headroom. Supply: internal Ni-MH pack plus AC adapter (100–240V), about 8 hours of continuous use and about 10 hours to full charge. Operating environment 0–40℃, 20–80% RH non-condensing; approx. W233 × D305 × H87 mm and 4.5 kg with standard table and four pins.

Service & Support

Guangzhou Yunke Electronic Co., Ltd. supplies the IMADA DTXS / DTXA range with selection advice, quotations, demonstrations, software setup, optional small tables and pins, and after-sales support.

Specification Sources

Values above are transcribed from the official IMADA DTXS-5N specification sheet; no values have been converted or rewritten. This is a quotation-only catalogue and no prices are listed.

For a quotation, lead time, a demonstration or an English datasheet, please contact our engineers.

Related Products

IMADA TAA-HTG-10N Torque Testers
Torque Testers

IMADA TAA-HTG-10N Torque Testers

TAA-HTG-10N
└ IMADA (Japan)
IMADA TAA-HTG-5N Torque Testers
Torque Testers

IMADA TAA-HTG-5N Torque Testers

TAA-HTG-5N
└ IMADA (Japan)
IMADA SHT-5N Torque Testers
Torque Testers

IMADA SHT-5N Torque Testers

SHT-5N
└ IMADA (Japan)
IMADA SDT-5N-L Torque Testers
Torque Testers

IMADA SDT-5N-L Torque Testers

SDT-5N-L
└ IMADA (Japan)
IMADA SDT-5N Torque Testers
Torque Testers

IMADA SDT-5N Torque Testers

SDT-5N
└ IMADA (Japan)
IMADA RSH-5N Torque Testers
Torque Testers

IMADA RSH-5N Torque Testers

RSH-5N
└ IMADA (Japan)