NIDEC-SHIMPO FGPX-250H Force Gauges (Model FGPX-250H) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. NIDEC-SHIMPO FGPX-250H Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.
Brand: NIDEC-SHIMPO | Category: Force Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | FGPX-250H(FGPX Series total 11 levels: FGPX-0.2 ~ FGPX-100, FGPX-250H, FGPX-500H) |
|---|---|
| Rated Capacity (R.C.) | ±2500N(±250.0kg) |
| Display Resolution | 1N / 0.1kg |
| Measuring Method | Force, Pressure Dual toward Measuring Force; General Normal Meter Measure, Correction Peak Meter Measure, Peak Meter Measure three Type Mode |
| Accuracy | ±0.2% R.C. ±1/2 digit(23℃) |
| Sampling Rate | 1000 times / s; Display Period 1, 2, 3, 5, 10, 20 times / s switchable |
| Display and Judgment | 4 digits LCD(digits Height 12mm, supports Position Display)+ Hi_NG / OK / Lo_NG three Judgment LED |
| Measuring Unit | N, kg(g) a Key Switching |
| Overload Quantity | 150% R.C., Over when Display Screen Display OVR |
| Data Storage | Continuous Memory 1000 groups / Single times Memory 100 groups / Standard Memory 50 groups, built-in Statistical Functions (Maximum, Minimum, Peak, Average, Standard Deviation) |
| Communication Interface | USB(standard Data Cable, with TORIEMON USB Software); RS-232C(optional Wire FGTC-6006); can Connection Mitutoyo Digimatic Printing Unit DP-1VR |
| Analog Output | ±1V(to ± Display Range), Accuracy ±50mV, 12bit D / A Rotation Replace, Output more New 1000 times / s, Load Resistance 10kΩ or more |
| External Signal | Output: Overload PUSH / PULL, Comparison Device HI / OK / LO Open Circuit Electric Extreme (Maximum DC30V / 5mA); Input: ZERO, HOLD, PEAK |
| Power Supply Method | AC Adapter (DC9V / 200mA) or built-in NiMH Battery, can Edge Charging Edge Measurement; Full Rear Continuous operation Approx. 10 hours, Charging most Length 17 hours |
| Body Dimensions | Width 82mm × Thickness 57mm × Length 214mm |
| Total Weight | Approx. 900g |
| Range Positioning | Height Load Unit Type, Body plus Large plus Thickness and standard Measurement , Use at Weight Type Component and Tool Pressure Test |
| Standard accessories | Meter Measure Adapter 6 Type, Stand, AC Adapter, Portable Case, USB Data Cable, Measurement (Height Load Unit Type standard) |
| Operating Environment | 0~40℃, 35~85% RH, non-condensing |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Model | Quantified capacity (R.C.) | Show Discreet%1%2%2%2 | Overload durability%%%2 |
|---|---|---|---|
| FGPX-0.2 | ±2.000N (±200.0g) | 0.001N / 0.1g | 200% R.C. |
| FGPX-0.5 | ±5.000N (±500.0g) | 0.001N / 0.1g | 200% R.C. |
| FGPX-1 | ±10.00N (±1000g) | 0.01N / 1g | 200% R.C. |
| FGPX-2 | ±20.00N (±2.000kg) | 0.01N / 0.001kg | 200% R.C. |
| FGPX-5 | ±50.00N (±5.000kg) | 0.01N / 0.001kg | 200% R.C. |
| FGPX-10 | ±100.0N (±10.00kg) | 0.1N / 0.01kg | 200% R.C. |
| FGPX-20 | ±200.0N (±20.00kg) | 0.1N / 0.01kg | 200% R.C. |
| FGPX-50 | ±500.0N (±50.00kg) | 0.1N / 0.01kg | 200% R.C. |
| FGPX-100 | ±1000N (±100.0kg) | 1N / 0.1kg | 200% R.C. |
| FGPX-250H | ±2500N (±250.0kg) | 1N / 0.1kg | 150% R.C. |
| FGPX-500H | ±5000N (±500.0kg) | 1N / 0.1kg | 150% R.C. |
Note: The above-mentioned resolution, excess tolerance and shape are based on the official list of NIDEC, FGPX-0.ZQ8/0.5, the pilot of the 141mm, and the owner of the aircraft, 141mm,, as well as the other party, the official list of the new treasures., is based on the following:, the size of the vehicle, is the size of the vehicle, and the FGPX-1 50 Captain 147mm, FGPX-100 Captain 149mm, GPX-250H / 500H is a high-cost heavy machine (82×57 x 214mm, overloadable 150% R.C.). Reference: 2. Reference values: 0.2.
What are the differences between the Q1: FGPX-250H and FGP series and how should they be chosen?
A: FGPX is a machine-type for enhanced data management and communication based on the FGP series, with a core of force consistency (0.2%R.C., 1000 times/sec sample).Stamp Z Stamp FGPX Additional provision of Z_SG/ OK/ Lo_NG Ruling LED, USB and RS-232C communications, X-X-X- X- X- X-ZX-X-X-X-ZX-X-X-X-X-X-X- A Mitutoyogpiaki interface and external ZERO/ HOLD/ PEAK signal input._ A single reading selection of FGP is sufficient; data records, decision output or connection to the upper machine / PLC are required and FGPX-250H is more appropriate
Q2: What is the appropriate measure for 2500N (250.0kg)?. Reference: FGPX-250H
A: Typical test projects include the breakage of heavy hardware, chain and sorbence, vehicle parts strength, structural glue strength, etc. The selection recommended that the conventional test be left in the 30 per cent ~80 per cent area of the process, with both accuracy and peak balances; if frequent measurements are required to close the full process to destructive tests, the selection is recommended to be made to the previous stage
Q3: Is the excess of FGPX-250H damaged?
A: FGPX-250H with a excess load tolerance of 150%R.C. The overload screen shows a warning warning for OVR. But the sensor is sensitive to instant shocks,_ Long-term or repeated excess use still causes zero drift or even damage, so avoid shock loads and reserve the amount of the excess of the mass of 20%30%
Q4: How do you import data from FGPX-250H?
A: Two channels: 1 USB - labeled USB data lines, installed official TORIEMON USB software to import data directly to, The maximum 100 per second is collected continuously; 2 RS-232C - additional FGTC-6006 dots are required to be used in conjunction with TORIEMON-S software. The data stored on the machine can also be returned to the computer once and for all.!
Q5: How long can the battery of FGPX-250H be used in a continuous period?
A: A built-in nickel hydrogen charger cell measuring approximately 10 hours continuously after filling; maximum 17 hours after charging, automatically stopping after filling, supporting side charge side measurements. 10 does not turn off the automatic for minutes (continuous use of the insulation for the AC adapter) and this feature can also be set to close
Q6: Why is FGPX-250H heavier than FGPX-100 and bigger than the plane?
Specifications: FGPX-250H FGPX-0 2500N 214mm 900g 82×57 150 2 100 FGPX. Please contact our engineers for the full technical wording. Reference values: 0.2.
Q7: What attachments do the FGPX-250H labels contain?
A: Host, 6 type of meter adapter (Cyclops 70°, Mountain 70°, V ditch 70°, plane 12mm, hook, The length of the baton L = 92mm, the crane, the AC adapter, the portable box, the USB data line, the measuring handle. the test rack, the special kit, is to be purchased separately
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.