Home › Products

Product Overview

Mitutoyo 293-235-30 Measuring Tools (Model 293-235-30) is a Mitutoyo Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Mitutoyo 293-235-30 Measuring Tools — Mitutoyo Measuring Tools · Yunke Electronics. Request a quotation and datasheet.

Brand: Mitutoyo | Category: Mitutoyo Measuring Tools

Sales Inquiries: 15626018696 · 78403603@qq.com

Mitutoyo 293-235-30 Measuring Tools

Technical Specifications

Order No.293-235-30
Series ModelsMDC-50MXT
Measuring Range25 - 50 mm
Resolution0.001 mm
Maximum Permissible Error J MPE±1 µm
Parallelism1 µm
Measuring Force DeviceRatchet sets Management (Measuring Force 7 ~ 12 N)
Dust / Water IP RatingIP65(IEC 60529)
Data outputwith
Total WeightApprox. 340 g

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

The number of coolant fluids in the Mitutoyo Mitutoyo 293 series (MDC-MX / MXT / PX / PXT) is thousands of feet out, and the number of coolant fluids is not as high as the number of coolant fluids in the Mitutoyo / MXT / PXT / It's MitutoyoWorkshop siteDesigned to be a thousand-degree range. It has a level of protection of IP65 dust/water, which can be measured directly in the environment of cutting fluids, cooling fluids, heat insulation, skating-shaped flask panels and rigid alloys. There is both laboratory-level precision and daily use by the machine bed.!


Order No.Series ModelsMeasuring rangeAccuracy J MPESplitConstant-calculation devicesData OutputWeight
293-230-30MDC-25MX0 - 25 mm±1 µmRatchet LockYes270 g
293-231-30MDC-50MX25 - 50 mm±1 µmRatchet LockYes330 g
293-232-30MDC-75MX50 - 75 mm±2 µmRatchet LockYes470 g
293-233-30MDC-100MX75 - 100 mm±2 µmRatchet LockYes625 g
293-250-30MDC-125MX100 - 125 mm±2 µmRatchet LockYes600 g
293-251-30MDC-150MX125 - 150 mm±2 µmRatchet LockYes740 g
293-252-30MDC-175MX150 - 175 mm±3 µmRatchet LockYes800 g
293-253-30MDC-200MX175 - 200 mm±3 µmRatchet LockYes970 g
293-254-30MDC-225MX200 - 225 mm±3 µmRatchet LockYes1110 g
293-255-30MDC-250MX225 - 250 mm±4 µmRatchet LockYes1270 g
293-256-30MDC-275MX250 - 275 mm±4 µmRatchet LockYes1370 g
293-257-30MDC-300MX275 - 300 mm±4 µmRatchet LockYes1590 g
293-234-30MDC-25MXT0 - 25 mm±1 µmRatchet tubesYes280 g
293-235-30MDC-50MXT25 - 50 mm±1 µmRatchet tubesYes340 g
293-236-30MDC-75MXT50 - 75 mm±2 µmRatchet tubesYes480 g
293-237-30MDC-100MXT75 - 100 mm±2 µmRatchet tubesYes635 g
293-240-30MDC-25PX0 - 25 mm±1 µmRatchet LockNo270 g
293-241-30MDC-50PX25 - 50 mm±1 µmRatchet LockNo330 g
293-242-30MDC-75PX50 - 75 mm±2 µmRatchet LockNo470 g
293-243-30MDC-100PX75 - 100 mm±2 µmRatchet LockNo625 g
293-244-30MDC-25PXT0 - 25 mm±1 µmRatchet tubesNo280 g
293-245-30MDC-50PXT25 - 50 mm±1 µmRatchet tubesNo340 g
293-246-30MDC-75PXT50 - 75 mm±2 µmRatchet tubesNo480 g
293-247-30MDC-100PXT75 - 100 mm±2 µmRatchet tubesNo635 g

III. Key Product Advantages

IV. Industries and Typical Applications

V. FAQ

Q: What is the scope and accuracy of the measurements of 293-235-30 (MDC-50MXT)? Q: What are the measurements of 293-235-30
A: Survey range 25 - 50 mm, Discreet 0.001 mm, Maximum Allowable Error (J MPE) 1 µm, Parallel 1 µm.Stamps of the A-RampStamps of the A-Standards, 25 - 50 mm, . Values are those measured at the time of the entire surface exposure test, and do not contain quantitative errors

Q: What's the difference between MX and MXT? Q: Q: Q
A: The range of measurements, accuracy, level of protection are identical, with differences in constant-calculation devicesMX is a rattling ring(detection 50). Reference: 10 N. Reference values: 5.MXT is a ratchet(System 7~12 N, with smoother single-hand operations). The option MXT, which often wears gloves or requires a single-hand rapid measurement, pursues the test consistency MX

Q: Can you get data or computers?As
A: Yes. This type of band measures the output of the end,! with data switches from 05 CZA 662 (1 m) or 05 CZA 663 (2 m) ZXVVSVVVVV XX XVVVVVV XV XV XV X X Q18 cable, Q18 Or USBOL (06 AFM 380B, 2 m) can connect computers, Also available is the wireless transmission of the U-WAVE-TM (264-622 IP67 / 264-623 bellow) module. -623 X-Telephone transmission. Reference: USB-ITN-B, SPC

Q: What exactly can IP65 protect against? Q
A: Ash protection (no dust seeps) according to IEC 60529, level 5, level , anti-jet (water ejected directly from any direction does not have a negative impact). This can be used directly next to a machine bed with cutting fluids and cooling fluids. Be careful that it requires rustproofing and IP65 does not mean it can be immersed in water for long periods._.Scope_Screech_Treaks.Screts. Reference: 6

Q: How long can the battery be used? How?
A: approximately 2.4 (normally used). Using the button type silver oxide battery SR44 (No. 938882) 1, randomly attached 1, The caps are simply open when replaced, and no tools are required for repair

Q: What do you bring randomly? Is the bar a label?
A: randomly attached poles 1, wrench (No. 301336) 1, SR44 battery 1, check scores. QuestScreech QuestSecrets Quest Q6Z Q Q The bar is used to match readings to the point of departure: the outer range by thousands of minutes by 25 mm, except for the 0 - 25 mm specification (the scale starting is zero, no poles are required). Qualified by the point of entry of the range Quetz Q-, except for the specification of the 07 (the scale starting with zero, no pole The remaining specifications are randomly attached to 1 poles

Q: How do you choose the process?!
A: The range of thousands by 25 mm is selected so that the measured size is within the range (this model is 25 - 50 mm). It is recommended that the usual dimensions be as close as possible to the intermediate length of the process. Do not measure at the end of the quantum process at the end of the limit for long periods; if multiple processes are to be covered, 0-25 / 25-50 / 50-75 / 75-100 mm 4 Permanent XQ X XV XSQ Q XS 4 With specifications

Q: What should be the focus of measurement?!?
A: The surface of the measurement is kept clean, with a hairline, a scratch or oil stain causing errors; the flow of the enter to the ratchete tubes slides (several steady force) is read without forced tightening; the work is first warm when the temperature is wide from 1,000 feet;_ Precision measurements are recommended in or around the metering room 20 °C; clean and rustproof after use, long-term without the battery

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

Mitutoyo 293-247-30 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 293-247-30 Measuring Tools

293-247-30
└ Digital Outside Micrometers
Mitutoyo 293-246-30 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 293-246-30 Measuring Tools

293-246-30
└ Digital Outside Micrometers
Mitutoyo 293-245-30 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 293-245-30 Measuring Tools

293-245-30
└ Digital Outside Micrometers
Mitutoyo 293-244-30 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 293-244-30 Measuring Tools

293-244-30
└ Digital Outside Micrometers
Mitutoyo 293-243-30 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 293-243-30 Measuring Tools

293-243-30
└ Digital Outside Micrometers
Mitutoyo 293-242-30 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 293-242-30 Measuring Tools

293-242-30
└ Digital Outside Micrometers