MOTIVE Z2S-SW-500N Force Gauges (Model Z2S-SW-500N) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. MOTIVE Z2S-SW-500N Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.
Brand: MOTIVE | Category: Force Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | Z2S-SW-500N |
|---|---|
| Series | Z2S-SW |
| Sensor Type | external Standalone Sensor (Waterproof Dustproof Type) |
| Range | 500N(Approx. 51 kgf) |
| Displayed Value | 500.0N (50.00 kgf) |
| Resolution | 0.1N (0.01 kgf) |
| Accuracy | ±0.2%(MOTIVE Official to Z2S Series Nominal Accuracy). |
| Main Unit Dimensions | Length 220.5 × Width 78 × Height 32.3 mm(Sensor Waterproof Dustproof) |
| Sampling Rate | 1000 times / s (MTM / MTA / MTF is 2 kHz) |
| Overload Capacity | 200% Full Range |
| Memory Functions | 1000 pcs Data Quantity Value |
| Data output | RS232C / USB / Analog -2~+2V / Comparison Signal |
MOTIVE Taiwan MOTIVE QZ2S-SW-500NA number of thrust-pulsors belonging to the Z2S-SW series of independent waterproof sensors with a range 500N, display value 500.0N (50.00 kgf) The resolution 0.1N (0.01 kgf). The sensors of Z2S-SW have waterproofing capabilities that can work long-term in a humid air, with coolant fluids and more dust. Automation control via RS232 interface with PLC. The process from 100N to 20 KN,. The sensor's tail is fitted with a thread interface for M6 ~ M16 in a quantum sequence to allow for direct penetration of the press, the platform and the work
| Model | Range | Displayed Value | Resolution | Equivalent kgf | Equivalent British_Equal British |
|---|---|---|---|---|---|
| Z2S-SW-100N | 100N | 100.0N (10.00 kgf) | 0.1N (0.01 kgf) | 10.2 kgf | 22.48 lbf |
| Z2S-SW-200N | 200N | 200.0N (20.00 kgf) | 0.1N (0.01 kgf) | 20.4 kgf | 44.96 lbf |
| Z2S-SW-500N | 500N | 500.0N (50.00 kgf) | 0.1N (0.01 kgf) | 51 kgf | 112.4 lbf |
| Z2S-SW-1000N | 1000N | 1000N (100.0 kgf) | 1N (0.1 kgf) | 102 kgf | 224.8 lbf |
| Z2S-SW-2000N | 2000N | 2000N (200.0 kgf) | 1N (0.1 kgf) | 204 kgf | 449.6 lbf |
| Z2S-SW-5000N | 5000N | 5000N (500.0 kgf) | 1N (0.1 kgf) | 510 kgf | 1.124 Klbf |
| Z2S-SW-10KN | 10KN | 10.00KN (1000 kgf) | 0.01KN (1 kgf) | 1020 kgf | 2.248 Klbf |
| Z2S-SW-20KN | 20KN | 20.00KN (2000 kgf) | 0.01KN (1 kgf) | 2039 kgf | 4.496 Klbf |
| Sensor type | Corresponding Process | Scalpel diameter |
|---|---|---|
| SW1-100N | 100N | M6 |
| SW1-200N | 200N | M6 |
| SW1-500N | 500N | M8 |
| SW1-1000N | 1000N | M8 |
| SW1-2000N | 2000N | M10 |
| SW1-5000N | 5000N | M10 |
| SW3-10KN | 10KN | M16 |
Q: How do you choose the measure?
A: The nearest range is selected by the measured value of 1.5 ~ 2. This model size 500N (approximately 51 kgf) Resolution 0.1N (0.01 kgf), which recommends that the test force normally fall to the full mass of the 20% ~ 100%; If the measured force value is only below 10 per cent of the full range for a long time, it is recommended that a smaller level be changed to obtain a better and effective resolution
Q: Can you use it in a place where the air is more wet? Q
A: Yes. MOTIVE official reply is "A waterproofing sensor" and Z2S-SW is designed for the wet, cooling fluid, dusty environmentSensorWith protective capabilities, the mainframe itself should still avoid water and soaking
Q: How do you connect to the automation?!!?
A: The official response of MOTIVE is that "and the automated device is connected to RS232 via the RS232 interface ", which is sufficient to bind the sensor to the press or platform in conjunction with the sensor's thread interface._. Reference: PLC
Q: What should we do with the screwdriver?
A: Sensor screws increased with increased mass: 100N / 200N for M6, 500N / 1000N for M8, XI X-X-X-X-X-X-X-X-X-X-X-X-X-X-Z-Z-Z-Z-Z-Z-Z-Z-Z-Z-Z-Z 2000N / 5000N for M10 and 1011 for M16. It is sufficient to set aside the conch punctures in the selected slot for the design of the assembly. / 2000N / 5000N for M10 and 10 for M16 Q. Reference: KN
Q: How to read the display value of the 20 KN?
A: 20 KN shows 20.00 KN (2000 kgf) resolution 0.01 KN (1 kgf). Q Q QQ QQ he N display value of the MOTIVE official specification table for this line is printed as "20.00N " and the corresponding mass-resolution ratio is 20.00 KN, which has been amended in this table. Que
Q: Can you use the automation?Assem
A: Yes. Except for the RS232C/ USB digital interface, Also available -2 ~ +2 V Simulation of voltage output and +NG / OK / -NG open arctic comparison signal (MAX Z) XXC 10 mA) The automatic up and downs and the eligibility determination can be made directly from PLC, which is accompanied by the electrodynamic power station. Reference: 30 V
Q: How does precision be called? Can it be traced?!!?
A: 0.2 per cent (officially known accuracy of the Z2S series). Randomly accompanied by a check of accomplishment book, which can be sent in accordance with the relevant protocols such as JJG if it is required to be measured by a third party;;Systems of the Z2S series;Systems of the Systems of the Systranges; Daily verification in the field can be conducted using standard gauges or calibrated calibrated code matching. Reference: MOTIVE
Q: What should be the watchful side of daily usage?!?
A: 1 The force shall be directed at the sensor axis to avoid side-direction and bending; 2 Do not remain for long beyond 110 per cent and be discharged in time after warning; 3 Battery low voltage instructions appear and charged in a timely manner. Long-term absences should also be repeated at intervals;4 the environment is generally 0 ~ +40 °C, 20 ~ 80 % RH, avoiding condensation, Corrosionable gases and strong vibration environments;5 Regularly used standard gauges or coded verifications to maintain traceability.5
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.