Home › Products

Product Overview

ACI-05S Torque Testers (Model ACI-05S) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. ACI-05S Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: See datasheet | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

ACI-05S Torque Testers

Technical Specifications

ModelACI-05S
SeriesACI Series Over Height Resolution Micro Small Torque Testers(units MOTIVE MOTIVE)
Peak When Measuring Range0.50000~0.00250 N·m|5.0000~0.0250 kgf·cm|4.4000~0.0220 Lbf·in
Accuracy±0.5%
Display3.5 Display Display
Measurement modeTRACK(, Use at Calibration and Display Over Range), +PEAK(Correction Peak), -PEAK( Peak), F.PEAK(No. a Peak FIRST PEAK)
Judgment and Statisticscan above Lower Limit, Range internal Automatic Judgment LO / OK / HI; Automatic Meter Calculation Measurement Total Times, Pass / Fail Judgment Times, Maximum, Minimum, Average
Memory Capacity999 pcs Data
Real-time OutputMeasurement Data Real-time Automatic Output
Auto Clear Timecan Setting 0.5 / 1 / 2 / 3 / 5 / 8 / 10 s Automatic Clear Measured values
Data outputwith Wire USB; Wireless WIFI(optional)
BatteryNi-MH NiMH 1.2V × 6 can Rechargeable Battery groups (2500 mAh), can Charging 500 times or more
Charging / Continuous Operating5 hours or less Full, Fully charged Continuous Operating Approx. 10 hours or more
Power SupplyAC Adapter (9V 1.3A) / Ni-MH Battery groups
Management Management FunctionsProvided Management Management, Protection more Setting Conditions and Test
Optional AccessoriesData Automatic Electric can Source MES Management Management; Display Electric Test Over Range Torque Wire
NotesThis Series Surface toward Micro Small Torque Height Resolution Measurement, Reading can to Small Number points Rear 5 digits, Selection when per Day Normal Torque at Range 20%~80% is

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. Super-high resolution: The range of measurements 0.50000 0.00250 N·m read to decimal places 5, suitable for the small torque dichotomy and matching
  2. Specifications: TRACK PEAK. Please contact our engineers for the full technical wording.
  3. Data manageable: 999 Group stored, total number of automatic counts, number of eligible, MAX / MIN / AVE, Supports real-time output and automatic clearance time setting (0.5-10 s)
  4. Automation of determination: A floor and a floor limit can be set and the measurement results automatically determine that LO/ OK/ HI is free of screen interpretation of the production line. / / / OK / HI. / / / / / / / / / / / /
  5. Retroactivity: USB Wired and WIFI Wireless (selection) upload computers with data automatically entering MES system administration
  6. Password management: Prevent unauthorized personnel from changing the set-up conditions or modifying the test results to fit the controlled production line..Secrets.Secrets.Secrets.Scret
  7. Portable continuation: Ni-MH 2500 mah battery, 5 hour full of approximately 10 hours or more of continuous use

Applied trade & test object

For robotics, cellular and consumer electronic assembly, medical devices, fibre optic devices, microelectronics, clocks and precision instruments; subjects included mini-electric/aerodynamic lifts, torque screws, etc. — Microspeed decelerations are hardened torque and block torque, stunned by the cogs, and the force torque test of the mini-elastic elements and chains

FAQ

Q: What is the difference between the ACI series and the ACI-WE series?

A: a microtangle measure of the ACI series of positioning super-high resolution (0.2 / 0.5 N·m in two files, reading to decimal places 5); The ACI-WE series has a wider range of range coverage (internal 0.2 — 10 N·m , external 20 — 2000 N·m ) and provide an additional CM/ CMK process capability index calculation. If the torque is below 0.5 N·m and requires a very high resolution, choose ACI; Otherwise, choose ACI-WE.!

Q: What's the use of F.Z. 's first peak? Q: What'. Reference: PEAK

Specifications: PEAK FIRST. Please contact our engineers for the full technical wording.

Q: With ACI-02S or ACI-05S? Q: Q

A: Daily tox mode landing in the quantum 20% ~ 80 % selection: ACI-02S peak range 0.20000 ~ 0.00100 N·m, Microtangles suitable for 0.05 N·m magnitude; range of measurements at ACI-05S peak 0.50000 ~ 0.00250 N·m for 0.1 ~ 0.4 N·m.ScreaksScope of 0.05 N·m XV QScope of 0.1 Stamps of the A smaller one is preferred to a higher resolution, but not beyond the process.!

Q: Can you export data with a computer?

A: Yes. Marked USB cable transmission, selected WIFI wireless transmission; calibrated computer software allows automatic posting of test data into the computer and MES retroactive management. And display on the computer the torque curve of the batch test process

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

HMS18V-2.5 Torque Testers
Torque Testers

HMS18V-2.5 Torque Testers

HMS18V-2.5
└ MOTIVE (Taiwan, China)
HMS18V-6 Torque Testers
Torque Testers

HMS18V-6 Torque Testers

HMS18V-6
└ MOTIVE (Taiwan, China)
HMS18V-8 Torque Testers
Torque Testers

HMS18V-8 Torque Testers

HMS18V-8
└ MOTIVE (Taiwan, China)
HMS18V-12 Torque Testers
Torque Testers

HMS18V-12 Torque Testers

HMS18V-12
└ MOTIVE (Taiwan, China)
FGM-400N.m Torque Testers
Torque Testers

FGM-400N.m Torque Testers

FGM-400N.m
└ MOTIVE (Taiwan, China)
FGM-200N.m Torque Testers
Torque Testers

FGM-200N.m Torque Testers

FGM-200N.m
└ MOTIVE (Taiwan, China)