Home › Products

Product Overview

ACI-P-200N.m Torque Testers (Model ACI-P-200N.m) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. ACI-P-200N.m Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: See datasheet | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

ACI-P-200N.m Torque Testers

Technical Specifications

ModelACI-P-200N.m
SeriesACI-P Series Oil Pressure Torque Testers(units MOTIVE MOTIVE)
Range / ResolutionMaximum Load 200.0 N · m / 2000 kgf · cm / 1800 Lbf · in; Minimum Load 0.1 N · m / 1 kgf · cm / 1 Lbf · in
Accuracy±0.5%
Display3.5 Display Display
Measurement modePEAK(Peak, Input Maximum), TRACK(, Use at Calibration and Display Over Range), PULSE( Number, Display Measurement Number)
Measuring Directionwhen Needle / when Needle Dual toward
Measuring UnitN · m, kgf · cm, Lbf · in, kgf · m, Lbf · ft switchable
Judgment and Statisticscan above Lower Limit, Range internal Automatic Judgment OK / NG; Display Maximum, Minimum, Average and Measurement Times
Memory Capacity1000 pcs Data
Real-time OutputMeasurement Data Real-time Automatic Output, Peak Automatic above Electric
Auto Clear Timecan Setting 0.5 / 1 / 2 / 3 / 5 / 8 / 10 s Automatic Clear Measured values
Zero Setting MethodSingle Key Manual Zero Setting
Data outputwith Wire USB, RS-232C(optional), 485 MODBUS Protocol (optional); Wireless WIFI(optional)
BatteryNi-MH NiMH 1.2V × 6 can Rechargeable Battery groups (2500 mAh), can Charging 500 times or more
Charging / Continuous Operating5 hours or less Full, Fully charged Continuous Operating Approx. 10 hours or more
Power SupplyAC Adapter (10V) / Ni-MH Battery groups
Dimensions160 × 126 × 41 mm(Length × Width × Height)
Base Dimensions□20 / □9.5
Optional Functionsthree Circuit Open Quantity Input (can Connection Torque Sensor, Provided Torque and Angle Measurement); Analog Quantity ±5V / ±10V / 0-10V Voltage Input Detection and Control
Notes1000 N · m levels Official Sample This Lbf · in Series 90000, per 1 N · m ≈ 8.851 Lbf · in Conversion is Approx. 9000, This Gauge per Conversion Value Series Output

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. Special pulse measurements: The torque and pulse numbers can be shown simultaneously, and the PULSE mode gives a direct pulse number, which the normal torque tester cannot do
  2. Volume width: 200.0 N·m, one block, covers the middle torque oil pressure pulse tool to mark the need.__Bretts
  3. Three measurement models: PEAK for maximum retention for check, TRACK for calibration and PULSE for pulse number for characterization of the oil pressure pulse tool
  4. Data management: 1000 group storage, autostating MAX/ MIN/ AVE with measurement number, peak upload computer, supporting real-time output
  5. Automation of determination: A determination of OK/NG, MAX/ MIN/ AVE can be read out directly with the upper and lower limits. / AVE / / / AVE Directly read out
  6. Interface rich: USB tag, RS-232C and 4853 protocol matching, WIFI wireless selection is set remotely. XQx XQx . Reference: MODBUS. Reference values: 485.
  7. (a) A strong expansion: a three-way switch to enter a dynamic torque sensor for dynamic torque and angle measurements;_ The selected simulation volume 5V / 10V / 0-10V input detection and control. 10V / 0-10V X import detection and control
  8. Portable continuation: Ni-MH 2500 mah battery, 5 hour full of approximately 10 hours continuous use, Aerial body only 160 x 126 x 41 mm

Applied trade & test object

For the extensive use of oil-pressure pulse triggers, such as vehicle whole and parts assembly, motorcycle and engineering machinery assembly, home appliances and hardware manufacturing; test subjects for oil-pressure pulse triggers, oil-pressure pulses, The output torque of the aeropulse tool is marked against pulse numbers and can also be used for regular checking of the pulse tool, for maintenance of pre- and post-performance comparisons and for the confirmation of the stint process parameters

FAQ

Q: What's the difference between the ACI-P series and the normal torque test?

A: ACI-P is designed specifically for a hydraulic pulse tool: it provides a PULSE (pulsation) mode in addition to measuring torque, which shows both torque and pulse numbers, while the normal torque tester only detects torque. The output of the oil-pressure pulse tools is intermittent and the values measured in the normal peak mode are often biased from the actual process values, and therefore specialized instruments are required

Q: What is the measure accuracy? What units are selected?

A: Measurement accuracy 0.5%. The measurement units are optional for N.m., kgf.cm., Lbf.in, kgf.m., DBf.ft. The three commonly used units are automatically converted in the instrument

Q: What does ACI-P-10N.m mean by "inlineable"?

A: The sensor in this slot can be built into the instrument (one size) and the rest (20 N·m and above) with the outer QLS sensor (symbolized). The inner paragraph is easily portable and is used on the desktop. The outlet is suitable for the sensor to be placed in the work or production line.!!

Q: Can you get PLC or do an automated integration? Q

A: Yes. Marked with USB, selected with RS-232C and 485 MODBUS; Further optional three-circuit switch input (momental torque sensor to dynamic torque and angle measurements) and simulation volume 5V / 10V / 0-10V voltage transfer Stamp Incoming detection and control,! The WIFI is selected and remotely set and entered into the factory MES system.As_Functions_Treaks

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

HMS18V-2.5 Torque Testers
Torque Testers

HMS18V-2.5 Torque Testers

HMS18V-2.5
└ MOTIVE (Taiwan, China)
HMS18V-6 Torque Testers
Torque Testers

HMS18V-6 Torque Testers

HMS18V-6
└ MOTIVE (Taiwan, China)
HMS18V-8 Torque Testers
Torque Testers

HMS18V-8 Torque Testers

HMS18V-8
└ MOTIVE (Taiwan, China)
HMS18V-12 Torque Testers
Torque Testers

HMS18V-12 Torque Testers

HMS18V-12
└ MOTIVE (Taiwan, China)
FGM-400N.m Torque Testers
Torque Testers

FGM-400N.m Torque Testers

FGM-400N.m
└ MOTIVE (Taiwan, China)
FGM-200N.m Torque Testers
Torque Testers

FGM-200N.m Torque Testers

FGM-200N.m
└ MOTIVE (Taiwan, China)