ACI-W-10N.m Torque Testers (Model ACI-W-10N.m) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. ACI-W-10N.m Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: See datasheet | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | ACI-W-10N.m(Sensor can built-in) |
|---|---|
| Series | ACI-W Series Height Precision Torque Testers(units MOTIVE MOTIVE) |
| Range / Resolution | Maximum Load 10.000 N · m / 100.00 kgf · cm / 90.00 Lbf · in; Minimum Load 0.001 N · m / 0.01 kgf · cm / 0.01 Lbf · in |
| Accuracy | ±0.5%(2.0000 kgf · cm or Low at ±0.005 kgf · cm) |
| Display | 4.2 Display Display |
| Sampling Rate | Height up to 10 kHz, can Precision Accuracy to Small Number points Rear 4 digits |
| Measurement mode | PEAK(Peak, Input Maximum), TRACK(, Use at Calibration and Display Over Range), GRAPH(Display Measurement Full Range Diagram , Setting Control) |
| Measuring Direction | when Needle / when Needle Dual toward |
| Judgment and Statistics | can above Lower Limit, Range internal Automatic Judgment OK / NG; Display Maximum, Minimum, Average and Measurement Times |
| Memory Capacity | 1000 pcs Data |
| Real-time Output | Measurement Data Real-time Automatic Output, per times Peak Automatic above |
| Auto Clear Time | can Setting 1 / 2 / 3 / 5 / 10 s Automatic Clear Measured values |
| Zero Setting Method | Single Key Manual Zero Setting |
| Auto Power-off | 10 minutes internal No Operation Auto Power-off |
| Data output | RS-232C, USB, MODBUS Protocol |
| Battery | Ni-MH NiMH 1.2V × 6 can Rechargeable Battery groups (3000 mAh), can Charging 500 times or more |
| Charging / Continuous Operating | 5 hours or less Full, Fully charged Continuous Operating Approx. 8 hours |
| Power Supply | AC Adapter (12V) / Ni-MH Battery groups; Charger Input AC 100~240V(50 / 60Hz), Output DC 9V |
| Base Dimensions | □20 / □9.5 |
| Optional Measuring Connection Head | MW-025(Maximum 0.25 N · m), MW-10(Maximum 1.0 N · m), MW-20(Maximum 2.0 N · m), OW-60(Maximum 6.0 N · m), each with M2.6 / M3 / M4 / M6 , Operating Times 5000 times |
| Other Options | with M2.6, M3, M4, M5, M6 Hole Method Body (20 × 20 × 20 mm); Unit and Analog |
| Notes | This levels digits kgf · cm / Lbf · in Minimum Load Series Official Sample This, per 1 N · m = 10.197 kgf · cm = 8.851 Lbf · in Conversion, Part Division levels digits the Series and N · m Series at Quantity class Difference , Actual Resolution by N · m Series is Standard |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Applies to the electronic assembly of cellular manufacturing and consumption, medical devices, fibre optics, microelectronics, clock and precision instruments, car parts and components; subjects include precision electric / manual start, torque screws, etc. — The start-up torque and block-to-trangle, precision-elastic elements and force torque of the chain, and the tight torque and break-to-truck of the small-speciation threads, are microelectric and decelerated. tor tor tor tor tot
Q: What about the ACI-W and ACI-WE series?
A: Both are high-precision tortile test platforms for MOTIVE. ACI-W has a sampling rate of up to 10 kHz, reading to decimal points 4 bit, 4.2 inches, and 4.2 touch screens, and the number of the people who are using the software is as follows:, the number of people who are using the software is as follows:, the number of people who are using the software is as follows:, the Emphasis on sampling speed and display;! ACI-WE provides four models for +PEAK/-PEAK/F.PEAK and calculates the CM/CMK process capability index, Emphasis is placed on process statistics. If you focus on high-speed sampling and graphic analysis, choose ACI-W, if you focus on process capacity index and two-way peak ACI-WE
Q: Why does the k kgf cm column in the 0.2 / 2 / 5 N·m appear to be not in line with Nm?
A: The official sample of kgf cm differs in order of magnitude from the Lbf in minimum load.A-B:AploadsL- Conversion from 1 N·m = 10.197 kgf cm = 8.851 Lbf in 0.2 N·m, which is approximately equal to 0.001 kgf cm. The official original values are retained and it is noted here that the actual resolution is listed as N.m. and, if the data are subject to retroactive data, randomly checked accomplishment. Reference: 0.0001 N·m
Q: Can you use it while charging?
A: Yes. The instrument supports the battery powering or charging while working. Ni-MH 3000mah battery 5 full hours, full power can be used continuously for about 8 hours, 10 will be turned off automatically for power saving in minutes
Q: How does the measurement interface fit?
A: The selection measurement interface has four sections: MW-025 (maximum 0.25 N·m with M2.6 screw), MW-10 (maximum 1.0 N·m with M3 screw), MW-20 (Max 2.0 N·m with M4 screw), OW-60 (Max 6.0 N·m with M6 screw) The number of times used was approximately 5000 times, selected according to the screw-specify..SS
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.