Home › Products

Product Overview

MOTIVE ACI-W-100N.m High-Precision Torque Tester (Model ACI-W-100N.m) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. MOTIVE ACI-W-100N.m high-precision torque tester, 100.00 N.m max, +/-0.5%, 10 kHz sampling, 4.2-inch touchscreen, RS-232C / USB / MODBUS.

Brand: See datasheet | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

MOTIVE ACI-W-100N.m High-Precision Torque Tester

Technical Specifications

ModelACI-W-100N.m(external Sensor)
SeriesACI-W Series Height Precision Torque Testers(units MOTIVE MOTIVE)
Range / ResolutionMaximum Load 100.00 N · m / 1000.0 kgf · cm / 900.00 Lbf · in; Minimum Load 0.01 N · m / 0.1 kgf · cm / 0.01 Lbf · in
Accuracy±0.5%(2.0000 kgf · cm or Low at ±0.005 kgf · cm)
Display4.2 Display Display
Sampling RateHeight up to 10 kHz, can Precision Accuracy to Small Number points Rear 4 digits
Measurement modePEAK(Peak, Input Maximum), TRACK(, Use at Calibration and Display Over Range), GRAPH(Display Measurement Full Range Diagram , Setting Control)
Measuring Directionwhen Needle / when Needle Dual toward
Judgment and Statisticscan above Lower Limit, Range internal Automatic Judgment OK / NG; Display Maximum, Minimum, Average and Measurement Times
Memory Capacity1000 pcs Data
Real-time OutputMeasurement Data Real-time Automatic Output, per times Peak Automatic above
Auto Clear Timecan Setting 1 / 2 / 3 / 5 / 10 s Automatic Clear Measured values
Zero Setting MethodSingle Key Manual Zero Setting
Auto Power-off10 minutes internal No Operation Auto Power-off
Data outputRS-232C, USB, MODBUS Protocol
BatteryNi-MH NiMH 1.2V × 6 can Rechargeable Battery groups (3000 mAh), can Charging 500 times or more
Charging / Continuous Operating5 hours or less Full, Fully charged Continuous Operating Approx. 8 hours
Power SupplyAC Adapter (12V) / Ni-MH Battery groups; Charger Input AC 100~240V(50 / 60Hz), Output DC 9V
Base Dimensions□20 / □9.5
Optional Measuring Connection HeadMW-025(Maximum 0.25 N · m), MW-10(Maximum 1.0 N · m), MW-20(Maximum 2.0 N · m), OW-60(Maximum 6.0 N · m), each with M2.6 / M3 / M4 / M6 , Operating Times 5000 times
Other Optionswith M2.6, M3, M4, M5, M6 Hole Method Body (20 × 20 × 20 mm); Unit and Analog
NotesThis levels digits kgf · cm / Lbf · in Minimum Load Series Official Sample This, per 1 N · m = 10.197 kgf · cm = 8.851 Lbf · in Conversion, Part Division levels digits the Series and N · m Series at Quantity class Difference , Actual Resolution by N · m Series is Standard

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

The MOTIVE ACI-W-100N.m is a high-precision torque tester with an external sensor, designed for precision electric and hand torque tools and for very small torque measurements on components. It handles a maximum load of 100.00 N·m (1000.0 kgf·cm / 900.00 Lbf·in) down to a minimum of 0.01 N·m (0.1 kgf·cm / 0.01 Lbf·in), at ±0.5% accuracy. Sampling reaches 10 kHz with four decimal places, and the 4.2-inch colour touchscreen can display a full measurement trace (GRAPH, custom order).

PEAK holds the maximum input value for verification, TRACK follows the process for calibration, and GRAPH plots the entire measurement for analysis. The instrument stores 1000 data points, computes maximum, minimum, average and count automatically, and uploads results through RS-232C, USB and MODBUS. For configuration advice, please contact our engineers.

Key Features

Typical Applications

Mobile phone and consumer electronics assembly, medical devices, optical components, microelectronics, watches and precision instruments, and automotive parts. Test objects include precision electric / hand drivers, torque screwdrivers, starting and stall torque of micro motors and gearboxes, torque of precision springs and hinges, and tightening and breakaway torque of small threaded joints.

Model Selection & Reference Figures

Four optional measuring joints are available, each with a rated service life of 5000 uses: MW-025 (max. 0.25 N·m, M2.6 screw), MW-10 (max. 1.0 N·m, M3 screw), MW-20 (max. 2.0 N·m, M4 screw) and OW-60 (max. 6.0 N·m, M6 screw), covering 0.25–6.0 N·m. Other options include a cube with M2.6 / M3 / M4 / M5 / M6 threaded holes (20 × 20 × 20 mm), a transmission mechanism and simulated bolts. ACI-W and ACI-WE share the same high-precision platform: ACI-W emphasises 10 kHz sampling, four-decimal readout and the 4.2-inch touchscreen, whereas ACI-WE offers +PEAK / -PEAK / F.PEAK modes and CM / CMK process-capability indices. Choose ACI-W for high-speed sampling and graphical analysis; choose ACI-WE for process capability and bidirectional peaks.

Frequently Asked Questions

Q: Why do the kgf·cm minimum-load values look inconsistent with the N·m column on the 0.2 / 2 / 5 N·m ranges?
A: The official datasheet lists minimum-load figures for kgf·cm and Lbf·in that differ by an order of magnitude on those ranges. Using 1 N·m = 10.197 kgf·cm = 8.851 Lbf·in, a 0.0001 N·m resolution on the 0.2 N·m range corresponds to about 0.001 kgf·cm. This page keeps the official values and flags the discrepancy; use the N·m column for the actual resolution and refer to the supplied inspection certificate for traceable data.

Q: Can it be used while charging?
A: Yes. Battery power and simultaneous charging are both supported; the 3000 mAh pack charges in under 5 hours, runs about 8 hours, and the unit shuts down after 10 minutes of inactivity.

Service & Support

Guangzhou Yunke Electronic Co., Ltd. supplies the MOTIVE ACI-W / ACI-WE range with selection advice, quotations, demonstrations, optional measuring joints and after-sales support.

Specification Sources

Values above are transcribed from the official MOTIVE ACI-W series datasheet; the minimum-load discrepancy is noted rather than silently corrected. This is a quotation-only catalogue and no prices are listed.

For a quotation, lead time, a demonstration or an English datasheet, please contact our engineers.

Related Products

HMS18V-2.5 Torque Testers
Torque Testers

HMS18V-2.5 Torque Testers

HMS18V-2.5
└ MOTIVE (Taiwan, China)
HMS18V-6 Torque Testers
Torque Testers

HMS18V-6 Torque Testers

HMS18V-6
└ MOTIVE (Taiwan, China)
HMS18V-8 Torque Testers
Torque Testers

HMS18V-8 Torque Testers

HMS18V-8
└ MOTIVE (Taiwan, China)
HMS18V-12 Torque Testers
Torque Testers

HMS18V-12 Torque Testers

HMS18V-12
└ MOTIVE (Taiwan, China)
FGM-400N.m Torque Testers
Torque Testers

FGM-400N.m Torque Testers

FGM-400N.m
└ MOTIVE (Taiwan, China)
FGM-200N.m Torque Testers
Torque Testers

FGM-200N.m Torque Testers

FGM-200N.m
└ MOTIVE (Taiwan, China)