Home › Products

Product Overview

ACI-WE-0.2N.m Torque Testers (Model ACI-WE-0.2N.m) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. ACI-WE-0.2N.m Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: See datasheet | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

ACI-WE-0.2N.m Torque Testers

Technical Specifications

ModelACI-WE-0.2N.m
SeriesACI-WE Series Precision Torque Testers(units MOTIVE MOTIVE)—— built-in Sensor
Peak When Measuring Range0.200~0.005 N·m|2.00~0.05 kgf·cm|1.80~0.05 Lbf·in
Accuracy±0.5%
Peak When Measuring Range0.200~0.005 N·m|2.00~0.05 kgf·cm|1.80~0.05 Lbf·in
Display3.5 Display Display
Measurement modeTRACK(, Use at Calibration and Display Over Range), +PEAK(Correction Peak), -PEAK( Peak), F.PEAK(No. a Peak FIRST PEAK)
Judgment and Statisticscan above Lower Limit, Range internal Automatic Judgment LO / OK / HI; Automatic Meter Calculation Measurement Total Times, Correction Accuracy Times, Maximum, Minimum, Average, CM Value, CMK Value
Memory Capacity999 pcs Data
Real-time OutputMeasurement Data Real-time Automatic Output
Auto Clear Timecan Setting 0.5 / 1 / 2 / 3 / 5 / 8 / 10 s Automatic Clear Measured values
Data outputwith Wire USB; Wireless WIFI(optional)
BatteryNi-MH NiMH 1.2V × 6 can Rechargeable Battery groups (2500 mAh), can Charging 500 times or more
Charging / Continuous Operating5 hours or less Full, Fully charged Continuous Operating Approx. 10 hours or more
Power SupplyAC Adapter (9V 1.3A) / Ni-MH Battery groups
Management Management FunctionsProvided Management Management, Protection more Setting Conditions and Test
Optional AccessoriesData Automatic Electric can Source MES Management Management; Display Electric Test Over Range Torque Wire

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. One design: The sensor is built inside the airframe, holds it in hand, does not require external connection of the sensor and cable, and is suitable for full site-intensive, space-limited production line inspection
  2. Four measurement models: TRACK Tracking for calibration and process observation, +PEAK/-PEAK retaining the positive-reverse maximum value, F.PEAK capturing the first peak of the tight moment
  3. Process Capability Index: In addition to MAX/ MIN/ AVE, the value CM and CMK are directly calculated,Scope X / MIN / AVEScreak / AVE Enables the capacity assessment of the SPC process.!
  4. Automation of determination: A floor and a floor limit can be set and the measurement results automatically determine that LO/ OK/ HI is free of screen interpretation of the production line. / / / OK / HI. / / / / / / / / / / / /
  5. Retroactivity: USB wired and WIFI wireless (selection) upload computers with data automatically entering MES and displaying a twisting curve in the batch test process
  6. Password management: Prevent unauthorized personnel from changing the set-up conditions or modifying the test results to fit the controlled production line..Secrets.Secrets.Secrets.Scret
  7. Portable continuation: Ni-MH 2500 mah battery, 5 hour full of approximately 10 hours or more of continuous use

Applied trade & test object

Applies to the electronic assembly of cellular manufacturing and consumption, medical devices, fibre optics, microelectronics, clock and precision instruments, car parts and components; subjects include electrodynamic / precision lifting, torque screws, etc. — Tight torque torque, which is connected to the small-size screw, the start torque of mini-electric and deceleration machines, and the torque test of the small parts

FAQ

Q: What about the internal versus the outer ?. Reference: ACI-WE

Specifications: 10 N·m 2000 N·m 20 N·m 0.2 0.5 20 1 QLS. Please contact our engineers for the full technical wording. Reference values: 10.

Q: What is the value of CM and CMK? What is the use?

A: CM is a process capability index, CMK is a device capability index to measure stability and conformity of the output torque. The ACI-WE internals directly calculate these values. The 999 set of data need not be directed to the computer for re-stating and adapted to the electronic consumer production lines of vehicle parts and components that require the capacity of the assessment process

Q: Can you connect to the computer and access MES?

A: Yes. Marked USB cable transmission, WIFI wirelessly selected; the selected computer software allows for automatic posting of test data into the computer for MES retroactive management. And displays data tables, curves, column charts and statistical results on the computer

Q: How many slots are available?!

A: built-in total 5: 0.2 / 1 / 2 / 5 / 10 N·m; /S / 10 N·m; /Stamp / Outgoing total 8: 20 / 50 / 100 / 200 / 500 / 1000 / /Spun /ZX / Z13 / Z / XX / / / / 2000 N·m. The selection is best placed between the quantum of 20% ~ 80% on a daily torque basis. Reference: 1500

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

HMS18V-2.5 Torque Testers
Torque Testers

HMS18V-2.5 Torque Testers

HMS18V-2.5
└ MOTIVE (Taiwan, China)
HMS18V-6 Torque Testers
Torque Testers

HMS18V-6 Torque Testers

HMS18V-6
└ MOTIVE (Taiwan, China)
HMS18V-8 Torque Testers
Torque Testers

HMS18V-8 Torque Testers

HMS18V-8
└ MOTIVE (Taiwan, China)
HMS18V-12 Torque Testers
Torque Testers

HMS18V-12 Torque Testers

HMS18V-12
└ MOTIVE (Taiwan, China)
FGM-400N.m Torque Testers
Torque Testers

FGM-400N.m Torque Testers

FGM-400N.m
└ MOTIVE (Taiwan, China)
FGM-200N.m Torque Testers
Torque Testers

FGM-200N.m Torque Testers

FGM-200N.m
└ MOTIVE (Taiwan, China)