ACI-WE-1N.m-99T-NW Torque Testers (Model ACI-WE-1N.m-99T-NW) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. ACI-WE-1N.m-99T-NW Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: See datasheet | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | ACI-WE-1N.m-99T-NW |
|---|---|
| Series | ACI-WE-99T-NW Series Torque Testers(units MOTIVE MOTIVE)—— built-in Sensor |
| Peak When Measuring Range | 1.000~0.015 N·m|10.00~0.15 kgf·cm|9.00~0.15 Lbf·in |
| Accuracy | ±0.5% |
| Set Method | by Torque Testers, Electric and AP Circuit by Device groups , 1 pcs Circuit by Device can Management Management 99 units Torque Testers |
| Specification | Multi units Torque Testers at internal Tool with a Number |
| Data Upper | Multi units Torque Testers can Same when Automatic above Data; Instrument internal Part Memory Data also can All Reading |
| Data Place | Test Data All This Place Device, can Automatic SQL Data , by MES Welding Systems Management Management |
| Wireless Standard | IEEE 802.11ac / 802.11n / 802.11g / 802.11b / 802.11a |
| with Wire Standard | IEEE 802.3i / 802.3u / 802.3x;CSMA/CD、TCP/IP、DHCP、ICMP、NAT、PPPoE、SNTP、HTTP、DNS、L2TP、PPTP、IPsec |
| Port | 1 pcs Fixed 10 / 100 / 1000M Suitable RJ45 LAN Port; 1 pcs Fixed 10 / 100 / 1000M Suitable RJ45 WAN Port; 3 pcs 10 / 100 / 1000M Suitable RJ45 WAN / LAN optional Port ( supports Auto MDI / MDIX) |
| Frequency Range | 2.412~2.472 GHz; Operating Number 2.4GHz Range 13 pcs |
| Transfer Rate | 11b: 1 / 2 / 5.5 / 11 Mbps; 11g: 6~54 Mbps; 11n: Maximum 300 Mbps; 11ac: Maximum 867 Mbps |
| and Adjustment | DSSS Direct Series ; 11b: CCK / BPSK / QPSK; 11g: OFDM; 11n: BPSK / QPSK / 16-QAM / 64-QAM; 11ac: BPSK / QPSK / 16-QAM / 64-QAM / 256-QAM |
| Wire | 4 pcs external Fixed Height Increment Full toward Wire, Transfer Power Maximum 23 dBm |
| Specification | 10Base-T: 3 Class and above UTP / STP(≤100 m); 100Base-TX: 5 Class and above UTP / STP(≤100 m); 1000Base-T: Over 5 Class and above UTP / STP(≤100 m) |
| Operating Environment | Operating Temperature 0~40℃, Memory Temperature -40~70℃; Operating Humidity 10%~90%RH not Condensation, Memory Humidity 5%~90%RH not Condensation |
| by Device Power Supply | 12V DC 1A |
| Display | 3.5 Display Display |
| Measurement mode | TRACK(, Use at Calibration and Display Over Range), +PEAK(Correction Peak), -PEAK( Peak), F.PEAK(No. a Peak FIRST PEAK) |
| Judgment and Statistics | can above Lower Limit, Range internal Automatic Judgment LO / OK / HI; Automatic Meter Calculation Measurement Total Times, Correction Accuracy Times, Maximum, Minimum, Average, CM Value, CMK Value |
| Memory Capacity | 999 pcs Data |
| Real-time Output | Measurement Data Real-time Automatic Output |
| Auto Clear Time | can Setting 0.5 / 1 / 2 / 3 / 5 / 8 / 10 s Automatic Clear Measured values |
| Battery | Ni-MH NiMH 1.2V × 6 can Rechargeable Battery groups (2500 mAh), can Charging 500 times or more |
| Charging / Continuous Operating | 5 hours or less Full, Fully charged Continuous Operating Approx. 10 hours or more |
| Power Supply | AC Adapter (9V 1.3A) / Ni-MH Battery groups |
| Notes | This Model is ACI-WE Series Version This, Range and to ACI-WE Model a , external Provided groups and Data SQL / MES Capacity |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Industry applicable to the number of hard-working spaces for car parts and components and whole-car assembly, consumer electronic assembly, home-based electricity manufacturing, etc., requiring centralized data collection; typical scenario is multi-work-to-tangle data capture for whole-car / whole-air assembly lines,-to-work network collection,-to-to-do data collection,-to-to-do data collection,-to-to-work network data collection, etc.- Key tortile 100 per cent Retrospectively, statistical analysis of the process parameters is tightened and the torque data need to be connected to the digital plant of MES/QMS.Screen_Screen_Screen_Standards Quest Quest QuerySSSS
Q: What is the difference between 99T-NW and the normal ACI-WE?
A: The measure, accuracy and measurement function are fully consistent, with the difference in data links: normal ACI-WE uploads in USB wired or WIFI (selection); 99T-NW is a local area network programme managed by 99, a network of routers, with a T + computer + AP, a 1 router, LAN programme, and the 1 Quest Quest Each station has a unique number, multiple uploads automatically and all data are entered on the local server and can be automatically entered into the SQL database for MES management
Q: Can you really manage the 99 platform at the same time?
A: The official specifications are "1 routers manage 99 torque testers". Actual number of accesses also depends on the wireless environment on the site, the upload frequency of each instrument and the ability of the server to write._ Large-scale deployment is proposed to be tested on a small scale pilot basis
Q: Can data enter our own MES?
A: Yes. Test data are all entered into the local server and can be automatically written into the SQL database, which is managed by the MES system. Implementation requires your DV MES side to provide a database table structure or interface agreement.!!
Q: What does 99T-NW in the model mean?
A: 99T corresponds to "1 router managing 99 platform" NW is an acronym for (network). The suffix is separated from the host type space in the official sample, and the station is a searchable writing hyphenation form ACI-WE-1N.m-99T-NW
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.