DTX2-5N-A Torque Testers (Model DTX2-5N-A) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. DTX2-5N-A Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: See datasheet | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | DTX2-5N-A |
|---|---|
| Series | DTX2 Series Torque Testers(units MOTIVE MOTIVE) |
| Range | 5N.m |
| Display | 5.000N.m |
| Resolution | 0.001N.m |
| Measuring Unit | N · m / kgf · m / Lbf · in or N · cm / kgf · cm / Lbf · in |
| Accuracy | ±0.5%(Rated Capacity) |
| Sampling Rate | 1000 times / s |
| Display More | 10 times / s |
| Torque Capacity | Over Over Rated Capacity 150%(Over Over 110% when LED and ) |
| Sample Diameter | 20 mm ~ 180 mm |
| A / D Rotation Device | 24 digits |
| Processing Device | 8 digits Single Plate Unit |
| Power Supply Method | AC Power Supply 100V~240V |
| Battery Operating Time | —(AC Power Supply, No Battery) |
| Operating Temperature | 0 ~ 40 ℃ |
| Main Unit Weight | Approx. 4.5 kg |
| Output | RS232C; Mitutoyo Digital Voltage ±2V; Comparison Signal (+NG / OK / -NG) Electric Extreme Open Circuit Maximum 30V DC 10mA; Overload Torque Warning Signal (OVL) Electric Extreme Open Circuit Maximum 30V DC 10mA |
| Input | Distance Contact: Display Hold, Zero, Peak Mode / Mode optional |
| Peak Mode | 「 and 」 Mode ( when Needle and when Needle Peak) or 「 or 」 Mode ( when Needle or when Needle Peak) |
| Than | can Setting with Height Low Value Setting points |
| Memory | up to Memory 1000 pcs Data |
| Specification | Output, and LED ; Comparison Value is +NG when Open |
| Other functions | Auto Zero (1.0 ~ 25.5 s optional), Mode (7 class optional) |
| Auto Power-off | Use / 5 / 10 / 30 / 60 minutes optional |
| A / B Difference | A Type is AC 100V~240V AC Power Supply, Suitable Fixed at Detection digits Length General Electric Operating; Same levels digits B Type Available NiMH Rechargeable Battery, Suitable requires Shift or No Power Supply . |
| Optional Accessories | Connection Wire CB-201(Connection Device SS-100F-MM Output Diagram Gauge), RS232C Connection Wire CB-204 + Software ZLINK2E(Output Diagram Gauge and Recording Measured values), Mitutoyo Cable CB-304 + Mitutoyo Micro Type Processing Device DP-1VR(Printing and Statistics) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
(a) Bottle caps for beverages, foods, medicines, day-to-day, pesticides, etc., which open to torque and lock, are commonly used equipment for the use of brittle torque, packaging plants, quality control centres for the use of corrosion torque, and for the validation of the consistency of the opening torque; ; Any other equipment used for the use of twirlings, Quality Review Centre for the use of twi Also usable for the spin/ twist-to-tangle test of a circular descriptor requiring a 20--Text range. Reference: 180 mm
Q: What is the accuracy of the measurements in the DTX2 series?
A: Accuracy is 0.5% (valued capacity). It is recommended that the daily torque should be checked to the amount of 20%80%, The closer you approach the maximum limit of the full range, the easier you can trigger the 110% alarm
Q: What about Type A and Type B?
A: Type A is used for a fixed detection level by communicating with AC 100V ~ 240V; type B is available for NMMH charger cells (approximately 8 hours), The charger is approximately 10 hours (or AC adapter, suitable for mobile inspection, re-positioning or on-site powerless. The measure is identical to the accuracy
Q: Can you direct the measurements to the computer?
A: Yes. The RS232C connection line CB-204 with ZLINK2E software can export graphs and measurements; The same is true of the same type of connection line CB-201, which is used to take the written recorder SS-100F-MM output curves, and the same is true of the same type of connection. or use Mitutoyo cable CB-304 to receive Mitutoyo microprocessor DP-1VR to print and count
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.