Home › Products

Product Overview

DTX2-5N-B Torque Testers (Model DTX2-5N-B) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. DTX2-5N-B Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: See datasheet | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

DTX2-5N-B Torque Testers

Technical Specifications

ModelDTX2-5N-B
SeriesDTX2 Series Torque Testers(units MOTIVE MOTIVE)
Range5N.m
Display5.000N.m
Resolution0.001N.m
Measuring UnitN · m / kgf · m / Lbf · in or N · cm / kgf · cm / Lbf · in
Accuracy±0.5%(Rated Capacity)
Sampling Rate1000 times / s
Display More10 times / s
Torque CapacityOver Over Rated Capacity 150%(Over Over 110% when LED and )
Sample Diameter20 mm ~ 180 mm
A / D Rotation Device24 digits
Processing Device8 digits Single Plate Unit
Power Supply MethodNiMH Rechargeable Battery or AC Adapter
Battery Operating TimeApprox. 8 hours (Charging Approx. 10 hours)
Operating Temperature0 ~ 40 ℃
Main Unit WeightApprox. 4.5 kg
OutputRS232C; Mitutoyo Digital Voltage ±2V; Comparison Signal (+NG / OK / -NG) Electric Extreme Open Circuit Maximum 30V DC 10mA; Overload Torque Warning Signal (OVL) Electric Extreme Open Circuit Maximum 30V DC 10mA
InputDistance Contact: Display Hold, Zero, Peak Mode / Mode optional
Peak Mode「 and 」 Mode ( when Needle and when Needle Peak) or 「 or 」 Mode ( when Needle or when Needle Peak)
Thancan Setting with Height Low Value Setting points
Memoryup to Memory 1000 pcs Data
SpecificationOutput, and LED ; Comparison Value is +NG when Open
Other functionsAuto Zero (1.0 ~ 25.5 s optional), Mode (7 class optional)
Auto Power-offUse / 5 / 10 / 30 / 60 minutes optional
A / B DifferenceB Type Available NiMH Rechargeable Battery (Approx. 8 hours, Charging Approx. 10 hours) or external Connection AC Adapter, Suitable Check and Origin Wire Replace digits Operating; Same levels digits A Type is AC Power Supply.
Optional AccessoriesConnection Wire CB-201(Connection Device SS-100F-MM Output Diagram Gauge), RS232C Connection Wire CB-204 + Software ZLINK2E(Output Diagram Gauge and Recording Measured values), Mitutoyo Cable CB-304 + Mitutoyo Micro Type Processing Device DP-1VR(Printing and Statistics)

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. Volume coverage complete: From 2 N·m to 1000 N cm in 6, cans, threads and large torque caps can find the right slot
  2. High accuracy: 24 bit A/D, sampling rate 1000 times/sec, accuracy 0.5% rated capacity to capture the true peak of the tightness of the moment
  3. The peak mode is optional: "and" models keep both clockwise and counterclockwise peaks, and the "or" model takes only one side, matching different process-based determination habits.!
  4. Determine and alarm: High and Low Set Point colour code, beyond the i. e. LED flash + buzz,Spunner + + + +S +NG / OK /-NG and OVL signals can be directly exported to PLC. XZ
  5. Data retroactive: The maximum number of measurements is stored in 1000, which can be transferred to a computer archive by using the CB-204 connection line and ZLINK2E software
  6. The width of the jacket: the sample is in a diameter of 20 ~ 180 mm, and the common beverages, vials and solar caps do not require replacement of the clips
  7. Zero-and-barrier: Zero 1.0 ~ 25.5 seconds for automatic zero, 7 level for blockage, more stable readings and less easy to skip. Xx

Applied trade & test object

(a) Bottle caps for beverages, foods, medicines, day-to-day, pesticides, etc., which open to torque and lock, are commonly used equipment for the use of brittle torque, packaging plants, quality control centres for the use of corrosion torque, and for the validation of the consistency of the opening torque; ; Any other equipment used for the use of twirlings, Quality Review Centre for the use of twi Also usable for the spin/ twist-to-tangle test of a circular descriptor requiring a 20--Text range. Reference: 180 mm

FAQ

Q: What is the accuracy of the measurements in the DTX2 series?

A: Accuracy is 0.5% (valued capacity). It is recommended that the daily torque should be checked to the amount of 20%80%, The closer you approach the maximum limit of the full range, the easier you can trigger the 110% alarm

Q: What about Type A and Type B?

A: Type A is used for a fixed detection level by communicating with AC 100V ~ 240V; type B is available for NMMH charger cells (approximately 8 hours), The charger is approximately 10 hours (or AC adapter, suitable for mobile inspection, re-positioning or on-site powerless. The measure is identical to the accuracy

Q: Can you direct the measurements to the computer?

A: Yes. The RS232C connection line CB-204 with ZLINK2E software can export graphs and measurements; The same is true of the same type of connection line CB-201, which is used to take the written recorder SS-100F-MM output curves, and the same is true of the same type of connection. or use Mitutoyo cable CB-304 to receive Mitutoyo microprocessor DP-1VR to print and count

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

HMS18V-2.5 Torque Testers
Torque Testers

HMS18V-2.5 Torque Testers

HMS18V-2.5
└ MOTIVE (Taiwan, China)
HMS18V-6 Torque Testers
Torque Testers

HMS18V-6 Torque Testers

HMS18V-6
└ MOTIVE (Taiwan, China)
HMS18V-8 Torque Testers
Torque Testers

HMS18V-8 Torque Testers

HMS18V-8
└ MOTIVE (Taiwan, China)
HMS18V-12 Torque Testers
Torque Testers

HMS18V-12 Torque Testers

HMS18V-12
└ MOTIVE (Taiwan, China)
FGM-400N.m Torque Testers
Torque Testers

FGM-400N.m Torque Testers

FGM-400N.m
└ MOTIVE (Taiwan, China)
FGM-200N.m Torque Testers
Torque Testers

FGM-200N.m Torque Testers

FGM-200N.m
└ MOTIVE (Taiwan, China)