Home › Products

Product Overview

HTG2-2N Torque Testers (Model HTG2-2N) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. HTG2-2N Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: See datasheet | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

HTG2-2N Torque Testers

Technical Specifications

ModelHTG2-2N
SeriesHTG2-P Series Clamping Rotatable Torque Testers(units MOTIVE MOTIVE)
Capacity2N-m
Display2.000N-m
Resolution0.001N-m
Measuring UnitN · m, kgf · m or Lbf · in optional
Display4 digits Element , incl. Mode Indication, OVL Warning LED, Comparison LED
Sampling Rateper s 1000 times
Display Moreper s 10 times
Capacity Quantity150% F.S.(Over Over 110% F.S. when LED )
Clamping RangeNeedle Chuck Diameter 0.5 ~ 6.5 mm
A / D Rotation24 digits
CPU8 digits Single Plate Micro Processing Device
Accuracy±0.5% F.S. ±1 digits
Battery Operating TimeFully charged Continuous Approx. 8 hours (Charging Approx. 10 hours)
Operating Temperature0 ~ 40 ℃
Power Supplycan Charging NiMH Battery groups (4 cells) or AC Adapter
WeightDisplay Part Approx. 410 g; Sensor Part Approx. 530 ~ 600 g
Number OutputRS-232C ; Output Approx. ±2V F.S.; Comparison Device Output Signal ( Electric Extreme Open Circuit MAX 30V 10mA); Over Output Signal ( Electric Extreme Open Circuit MAX 30V 10mA)
Memory Functionsup to 1000 pcs Measured values
Peak Functionswhen Needle (CW) and when Needle (CCW) Peak optional
Alarm FunctionsOver Alarm (+NG can ON / OFF Selection)
Other functionsAuto Zero (1.0 ~ 25.5 s), minus () Functions
Auto Power-off5 / 10 / 30 / 60 minutes or optional

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. Axle bearing measurement axes: The axis is supported by axle bearings, which improves the reliability of repeated measurements and makes them easy to use for long periods.??S.S
  2. The rotor structure is fitted with a pin clip that can be fitted with a screw, bolt and axial parts in the diameter of 0.5 — 6.5 mm, which can be measured by a torque that is tied to the return of both directions
  3. High-precision high-speed: 24 bit A/D, sampling rate 1000 times/s, accuracy ZQ3% F.S. 1 bits with a high catch and good repeat. 1 bit.Sp.Sp.Sp.S.S.s. S. 1 bits. Reference: 0.5
  4. Double power source: Rechargeable nickel hydrogen batteries (section 4) or AC adapter with full power of approximately 8 hours
  5. Data export: RS-232C serial output, and 2V emulation output and comparison/ overload signal, recorder or PLC
  6. Handheld: The display department is only about 410 g and the sensor department is about 530-600 g, suitable for on-site and line inspection

Applied trade & test object

Pressure and return torque measurements applicable to hardeners such as screws, bolts, miniature electric machines, engine axes for the launch and block-to-rect tests, rotor buttons, bits, encoder rotation torque tests,_ And where electronic ures require axial parts to be held for positive reverse torque verification

FAQ

Q: How do the HTG2-P series fix the subject?

A: Holding the detector by needle clip with a diameter of 0.5-6.5 mm, suitable for screw, bolt and fine axis parts; inserting the measure into the clip and swipe it so that the torque of squeeze and return can be measured

Q: Is the display part separate from the sensor??

A: Separated structure. Shows about 410 g, and about 530-600 g (in terms of volume), and inter-telelinks by cable, which facilitates the deployment of sensors on clips or narrow working slots. Q Quest

Q: What's the difference between HTG2-2N and HTG2-200Nc?SQ

A: Different units of capacity: HTG2-2N with 2 N·m, resolution 0.001 N·m; HTG2-200Nc with 200 N cm, esolution 0.1 N cm. The mode of suspension is set to the mode of measurement 20% ~ 80%. The mode of torque is preferred to N. cm to obtain a higher resolution

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

HMS18V-2.5 Torque Testers
Torque Testers

HMS18V-2.5 Torque Testers

HMS18V-2.5
└ MOTIVE (Taiwan, China)
HMS18V-6 Torque Testers
Torque Testers

HMS18V-6 Torque Testers

HMS18V-6
└ MOTIVE (Taiwan, China)
HMS18V-8 Torque Testers
Torque Testers

HMS18V-8 Torque Testers

HMS18V-8
└ MOTIVE (Taiwan, China)
HMS18V-12 Torque Testers
Torque Testers

HMS18V-12 Torque Testers

HMS18V-12
└ MOTIVE (Taiwan, China)
FGM-400N.m Torque Testers
Torque Testers

FGM-400N.m Torque Testers

FGM-400N.m
└ MOTIVE (Taiwan, China)
FGM-200N.m Torque Testers
Torque Testers

FGM-200N.m Torque Testers

FGM-200N.m
└ MOTIVE (Taiwan, China)