HTG2-200Nc Torque Testers (Model HTG2-200Nc) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. HTG2-200Nc Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: See datasheet | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | HTG2-200Nc |
|---|---|
| Series | HTG2-P Series Clamping Rotatable Torque Testers(units MOTIVE MOTIVE) |
| Capacity | 200N-cm |
| Display | 200.0N-cm |
| Resolution | 0.1N-cm |
| Measuring Unit | N · m, kgf · m or Lbf · in optional |
| Display | 4 digits Element , incl. Mode Indication, OVL Warning LED, Comparison LED |
| Sampling Rate | per s 1000 times |
| Display More | per s 10 times |
| Capacity Quantity | 150% F.S.(Over Over 110% F.S. when LED ) |
| Clamping Range | Needle Chuck Diameter 0.5 ~ 6.5 mm |
| A / D Rotation | 24 digits |
| CPU | 8 digits Single Plate Micro Processing Device |
| Accuracy | ±0.5% F.S. ±1 digits |
| Battery Operating Time | Fully charged Continuous Approx. 8 hours (Charging Approx. 10 hours) |
| Operating Temperature | 0 ~ 40 ℃ |
| Power Supply | can Charging NiMH Battery groups (4 cells) or AC Adapter |
| Weight | Display Part Approx. 410 g; Sensor Part Approx. 530 ~ 600 g |
| Number Output | RS-232C ; Output Approx. ±2V F.S.; Comparison Device Output Signal ( Electric Extreme Open Circuit MAX 30V 10mA); Over Output Signal ( Electric Extreme Open Circuit MAX 30V 10mA) |
| Memory Functions | up to 1000 pcs Measured values |
| Peak Functions | when Needle (CW) and when Needle (CCW) Peak optional |
| Alarm Functions | Over Alarm (+NG can ON / OFF Selection) |
| Other functions | Auto Zero (1.0 ~ 25.5 s), minus () Functions |
| Auto Power-off | 5 / 10 / 30 / 60 minutes or optional |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Pressure and return torque measurements applicable to hardeners such as screws, bolts, miniature electric machines, engine axes for the launch and block-to-rect tests, rotor buttons, bits, encoder rotation torque tests,_ And where electronic ures require axial parts to be held for positive reverse torque verification
Q: How do the HTG2-P series fix the subject?
A: Holding the detector by needle clip with a diameter of 0.5-6.5 mm, suitable for screw, bolt and fine axis parts; inserting the measure into the clip and swipe it so that the torque of squeeze and return can be measured
Q: Is the display part separate from the sensor??
A: Separated structure. Shows about 410 g, and about 530-600 g (in terms of volume), and inter-telelinks by cable, which facilitates the deployment of sensors on clips or narrow working slots. Q Quest
Q: What's the difference between HTG2-2N and HTG2-200Nc?SQ
A: Different units of capacity: HTG2-2N with 2 N·m, resolution 0.001 N·m; HTG2-200Nc with 200 N cm, esolution 0.1 N cm. The mode of suspension is set to the mode of measurement 20% ~ 80%. The mode of torque is preferred to N. cm to obtain a higher resolution
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.