MDP-50 Torque Testers (Model MDP-50) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. MDP-50 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: See datasheet | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | MDP-50 |
|---|---|
| Series | MDP Series Digital Torque Testers(units MOTIVE MOTIVE) |
| Maximum Load (Kgf · Cm) | 50.00 |
| Maximum Load (N · M) | 5.000 |
| Maximum Load (Lbf · in) | 43.40 |
| Minimum Load (Kgf · Cm) | 0.001 |
| Minimum Load (N · M) | 0.01 |
| Minimum Load (Lbf · in) | 0.01 |
| Accuracy | ±1% |
| Display | OLED Display ( Light OLED Display at Environment under Height can See) |
| Measurement mode | Peak Mode (Display Force Maximum); Mode (with Force Real-time Display Force Value) |
| Hi / Lo Limit Judgment Functions | can Setting Limit Range, Automatic Judgment Measured values Maximum and most Low |
| Memory Capacity | 1000 pcs Data |
| Auto Power-off | can Setting (5 / 10 / 30 / 60 minutes) |
| Auto Clear Time | can Setting (01 ~ 60) Automatic Clear Measured values |
| Data output | with Wire USB; Wireless WIFI(Setting Control) |
| Battery | Battery 1.2V × 3 can Rechargeable Battery (3000 mAh) |
| Charging / Continuous Operating | Charging 4 hours; Fully charged Continuous Operating Approx. 12 hours or more |
| Power Supply | AC Adapter (6V 1.2A) |
| Dimensions | 176 × 74 × 29 mm(Length × Width × Height) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Twisted point check and calibration for torque, torque wrench, electric tools, small hardening, spring, chain-string force-tangle test, electronic assembly, toys, home power, and torque test and first confirmation of the torque line of car parts. —
Q: What is the difference between the MDP series and the MTG2 series?
A: The same is stored in the 176 x 74 x 29 mm body, OLED screen, ZQ8% accuracy, 1000 group,Screen XVXQScreenStamps XS, roup, The main difference is in the quantum slot: MDP for MDP-5 — MDP-200 (kgf cm) MTG2 is marked for MTG2-1N.m ~MTG2-10N.m (N.m.). The torque unit is selected for the range.. (.m). Reference: 1
Q: What are the occasions for peak and tracking patterns?
A: Peak mode is used to capture the maximum value of a tight moment (e.g. torque calibration, torque test); tracking mode is used to observe real-time changes in force (e.g. spring torque, process observation of chain barriers)
Q: How do you get the data?!??
A: Marked USB cable output to transmit stored 1000 group data to a computer; if wireless upload is required, a custom WIFI version is selected for statistical and retrospective use with the top software
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.