Home › Products

Product Overview

MG6-500BN Torque Testers (Model MG6-500BN) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. MG6-500BN Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: See datasheet | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

MG6-500BN Torque Testers

Technical Specifications

ModelMG6-500BN
SeriesMG-6 Series Digital Torque Wrench (units MOTIVE MOTIVE)
Maximum Torque Value500N.m(368.7ft.lb / 4424in.lb)
Torque Test Range25~500N.m(18.4~368.7ft.lb / 221~4424in.lb)
Accuracy Range100~500N.m(73.7~368.7ft.lb / 885~4424in.lb)
AccuracyCW when Needle ±2.5%; CCW when Needle ±3.5%
Degree0.1N.m / 0.1ft.lb / 1in.lb
LED Warning Lamp1 LED
Operating ModePeak Hold (P) / with Mode (T)
Unit SelectionN.m / in.lb / ft.lb
Wrench Length950 mm
Ratchet Square Drive3 / 4 in
Ratchet Head TypePlate Type Ratchet Head
Ratchet Head Number48
Dimensions (Width × Height)129 mm(Official Sample This this per Model Division Output, Value with levels digits , Item when and Sales Accuracy Tool Body Dimensions)
Documentation Storage Capacity50 groups
Data Transfer FunctionsNo
Key Number5 pcs
BatteryAA × 2
Operating Temperature-10 ℃ ~ 60 ℃
Storage Temperature-20 ℃ ~ 70 ℃
Humiditynon-condensing can to 90%
Test1 Scale
Vibration Test10 g
Environment Testvia
Electromagnetic Phase Testvia

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. Big tox overlay: 500N.m (368.7ft.lb / 4424in.lb) maximum tortile value with 3/4 inches, XQO/4Strate X X X/4 The torque for the large bolts is tight
  2. Two-way accuracy is clear: Clockwise CW 2.5 per cent, Counterclockwise CCW ZQ1 per cent, and tightness and dismantling of the check is based on clear precision. 3.5 per cent.Text and Dismantling
  3. The precision assurance is clear: the accuracy is guaranteed in the 100 — 500N.m (73.7 — 368.7 Xft.lb / 885 — 4424in .lb) area. Que : Que Que The selection is supported by evidence.!
  4. Double operating mode: Peaks hold (P) to confirm the final torque, following mode (T) to observe the process of application
  5. Three units are switched: N.m / in.lb / ft.lb, which is not required to convert against national and international drawings
  6. Strong durability: Fit to site and workshop environment through 1 meter drop test, 10 g vibration test, environmental test and electromagnetic compatibility test
  7. Data retention: the 50 group information storage capacity, which allows for a review of the hard record of this batch.SSSS

Applied trade & test object

For wind towers and airlock bolts, orbital traffic and bridge steel, engineering machinery and heavy equipment, torque torque and torque tight, and ships, pressure containers, The electrical towers, etc. require the assembly and overhaul of the 3/4 inches of a large torque wrench

FAQ

Q: How does the accuracy of the MG-6 series be called?

A: Officially named in directions: CW 2.5 per cent, CCW 3.5 per cent, and established within the Precision Guarantee Area. The selection of the type is to leave the daily torque of the operation within the guarantee of accuracy, rather than simply looking at the maximum torque value

Q: What are the differences in the scope of the torque test and the precision assurance?

A: The torque test range is the full measure that the wrench can show; the precision guarantee range is the interval between official commitments to achieve a nominal accuracy._ For example, MG6-500BN has been tested in the range 25 500N.m (18.4 368.7ft.lb / 221 4424in.lb) The precision assurance is 100 — 500N.m (73.7 — 368.7 Xft.lb / 885 — 4424in .lb). In practice, it is recommended that the target torque be kept within the scope of the assurance of accuracy

Q: Does the wrench have a communications function?

A: The MG-6 series of communications transmissions is "nil" and the data is stored in a 50 group, and the data is to be viewed on the wrench screen. If you need to upload to a computer or PLC, you can also upload to the computer the torque data..Stiles of the data.s Select a series with communication functions such as MOTIVE MEM-W/ MEA-W

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

HMS18V-2.5 Torque Testers
Torque Testers

HMS18V-2.5 Torque Testers

HMS18V-2.5
└ MOTIVE (Taiwan, China)
HMS18V-6 Torque Testers
Torque Testers

HMS18V-6 Torque Testers

HMS18V-6
└ MOTIVE (Taiwan, China)
HMS18V-8 Torque Testers
Torque Testers

HMS18V-8 Torque Testers

HMS18V-8
└ MOTIVE (Taiwan, China)
HMS18V-12 Torque Testers
Torque Testers

HMS18V-12 Torque Testers

HMS18V-12
└ MOTIVE (Taiwan, China)
FGM-400N.m Torque Testers
Torque Testers

FGM-400N.m Torque Testers

FGM-400N.m
└ MOTIVE (Taiwan, China)
FGM-200N.m Torque Testers
Torque Testers

FGM-200N.m Torque Testers

FGM-200N.m
└ MOTIVE (Taiwan, China)