MGC4-340 Torque Testers (Model MGC4-340) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. MGC4-340 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: See datasheet | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | MGC4-340 |
|---|---|
| Series | MGC Series Digital Torque Wrench (units MOTIVE MOTIVE) |
| Maximum Torque Value | 340N.m(250.7ft.lb / 3009in.lb) |
| Torque Test Range | 17~340N.m(12.5~250.7ft.lb / 150~3009in.lb) |
| Accuracy Range | 68~340N.m(50.1~250.7ft.lb / 602~3009in.lb) |
| Accuracy | CW when Needle ±2%; CCW when Needle ±3% |
| Degree | 0.1N.m / 0.1ft.lb / 1in.lb |
| LED Warning Lamp | 1 LED |
| Operating Mode | Peak Hold (P) / with Mode (T) |
| Unit Selection | N.m / in.lb / ft.lb |
| Wrench Length | 640 mm |
| Ratchet Square Drive | 1 / 2 in |
| Ratchet Head Type | Interchangeable Head Type Ratchet Head |
| Ratchet Head Number | 52 |
| Dimensions (Width × Height) | 18 × 14 mm |
| Documentation Storage Capacity | 50 groups |
| Data Transfer Functions | No |
| Key Number | 5 pcs |
| Battery | AA × 2 |
| Operating Temperature | -10 ℃ ~ 60 ℃ |
| Storage Temperature | -20 ℃ ~ 70 ℃ |
| Humidity | non-condensing can to 90% |
| Test | 1 Scale |
| Vibration Test | 10 g |
| Environment Test | via |
| Electromagnetic Phase Test | via |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
For auto repair and general assembly, motorcycle and farm assembly, for the tighting of the small and medium tot screw bolts in mechanical equipment, and for example, for the use of the 1/2 inch for the replacement of the head wrench in the assembly of the mold, the treatment, and the rack. . Quest Quest
Q: What about the MGC and MG-6 series?
A: MGC for 1/2 inches, over 135 340 N·m, Accuracy CW 2%/CCW 3%, with the thorn wheels being reassigned; 3 ; MG-6 is 3/4 inches, covers 500 850 N·m, Accuracy CW 2.5%/CCW 3.5%, with the thorn wheel in the form of a dial. The scalding pattern is sufficient by the bolt size (square size) and torque size. 3.5
Q: What does re-hatting mean?!!?
A: The ratchet wheels can be replaced from the wrench, a wrench can be used with different specifications for the head, suitable for the multiple bolts, requiring frequent switching, and can be replaced separately after the head is worn out
Q: Can you use the extra-precision guarantee?
A: Available, but no longer committed official to the nominal accuracy of 2%/ 3% after exceeding the assurance level. ZX ZZ It is recommended that the daily working torque should be placed in the 68 — 340N.m (50.1 — 250.7 Xft.lb / 602 — 3009in.lb) area
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.