Home › Products

Product Overview

ALGOL HF-2 Force Gauges (Model HF-2) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. ALGOL HF-2 Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.

Brand: ALGOL | Category: Force Gauges

Sales Inquiries: 15626018696 · 78403603@qq.com

ALGOL HF-2 Force Gauges

Technical Specifications

ModelHF-2
SeriesALGOL HF Series Electric Type Force Gauges
Maximum Load (N)20.00
Maximum Load (Kgf)2.000
Maximum Load (Gf)2000
Maximum Load (Lbf)4.408
Minimum Reading Value (N)0.01
Minimum Reading Value (Kgf)0.001
Minimum Reading Value (Gf)1
Minimum Reading Value (Lbf)0.001
Load UnitN / kgf / (gf) / lbf Switching Type
Test Accuracy±0.2% F.S. or less (Full Scale)
Accuracy±0.1% F.S. or less (Full Scale)
Speed10–320Hz, 6 Range Type Adjustable
Sampling Rate640 / s
Meter Measure MethodMaximum (Peak), Value
Display4 digits Display Screen ( LCD)
A / D16 bit times Replace Method
Load150%(up to to 105% when Warning)
Output SignalAnalog ±2V F.S., Digimatic(Mitutoyo), CENTRONICS(), RS-232C(), Comparison Signal ()
Continuous operating timeApprox. 10 hours (Full Charging, 25℃ Environment)
Charging timeApprox. 6 hours (built-in Protection Over Load Charging Assembly)
Operating Temperature0 ~ +40℃
Power SupplyRechargeable Battery, AC Flow Device Charging Use (100V / 115V / 220V, Item Specified)
Unit Body WeightApprox. 500g
Dimensions230 × 65 × 35 mm
Standard Supplied AccessoriesTest Accessories, AC Flow Device, Signal Output Wire, Signal Output Connection Device, Dedicated Box

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

AoloL Japanese love for KuAgsol Japan love-sustHF-2A single-size-sized, medium-sized, high-sized, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, Test accuracy 0.2%F.S., rediscover accuracy 0.1%F.S. The body contains nickel and cadmium charge batteries, which can be operated with one hand. 0.2%F.S. %F.S.S.XA Z Z S.XCxS.S.S.s 10-320Hz 6 answer speeds combined with 640 return/second sampling to capture peak power of a flash of fracture, stripping, shock, and to stabilize reading of instantaneous values; N, & & & & & & & & & & & & & & & & & & & ; of the & & & & & & & & & & & ; & (gf) lbf Four weight units one switch, one machine covering a variety of conditions. It is primarily oriented towards light load measurements: the power value of the connector plug, small springs, card buttons, etc. 20N. This can be done by hand or by means of semi-automatic test stations consisting of manual or electric test stations..SS. Reference: ALGOL, 20N, 2.000kgf, 4.408lbf, 0.01N, HF

List of full-model and quantum amounts for the HF series.%11222

ModelMaximum Maximum WeightSpwW[Minimum read value__BAR_BAR_BAR_BAR_BARFit for positioning
HF-110.000 N(1.000 kgf;1000.0 gf / 2.204 lbf)0.001 N / 0.001 kgf / 0.1 gf / 0.001 lbfMicrometric measurements%
HF-220.00 N(2.000 kgf;2000 gf / 4.408 lbf)0.01 N / 0.001 kgf / 1 gf / 0.001 lbfLight load measurements%%
HF-550.00 N(5.000 kgf;5000 gf / 11.02 lbf)0.01 N / 0.001 kgf / 1 gf / 0.01 lbfGeneral-type measurements
HF-10100.00 N(10.000 kgf;10000 gf / 22.04 lbf)0.01 N / 0.001 kgf / 1 gf / 0.01 lbfGeneral-type measurements%1%2%2
HF-20200.0 N(20.00 kgf;— / 44.08 lbf)0.1 N / 0.01 kgf / 0.01 lbfMedium load measurement%1%2%2%
HF-50500.0 N(50.00 kgf;— / 110.2 lbf)0.1 N / 0.01 kgf / 0.1 lbfLoad Measurement%1%2
HF-1001000.0 N(100.00 kgf;— / 220.4 lbf)0.1 N / 0.01 kgf / 0.1 lbfLarge load measurements%%

Output Interface Overview

InterfaceTypeUseNotes
Simulate Output±2V F.S.Logometer, oscillator observation curveStandard Configuration
DigimaticMitutoyoCharlielDirect-line Mitutoyo data collector or printer output dataStandard Configuration
CENTRONICSThe opposite.!Directly connected personal computer printers, directly print test resultsPurchases
RS-232CSerialConnect to computers, set parameters, read dataPurchases
Compare signalConnection outputExternal OK/NG determination and alarm device%Purchases

II. Core advantages of productsCurrently

III. Applicable industry and typical tests

IV. FAQ Questions and answers Question and answer Question

Q: How many steps do you have in the HF series? How?
A: HF series, 7: HF-1 (10N), HF-2 (20N), HF-5 (50N), XIXQ XV XC, XZ XV XV XYZ XYZ XYZ HF-10 (100N), HF-20 (200N), HF-50 (500N), HF-100 (1000N). Q Q, HF-100 (1000N). he selection suggests that daily measurements should be dropped between 20% ~ 80% = the full process: too small a slot would over-inform the alarm and too large a slot would sacrifice reading accuracy

Q: What is the resolution of HF-2?
A: Max. 20N, minimum read 0.01N (0.001kgf/1gf). Note HF-1, HF-10, , HF-10 The three specifications HF-100 display the value 9999, with thousands of digits presented in 1, 0 interactive flash, indicating the actual value shown as 10000

Q: Can you switch the unit of the charge?
A: Yes. This is N/ kgf/ (gf)/ lbf switch, all in four units

Q: How do peaks and instantaneous values change?!
A: PEAK / TRACK on the panel toggle key: PEAK model maintains maximum values during the testing and is suitable for fracking, detaching and plugging peaks; The TRACK mode shows the current stress in real time and is suitable for observation of the loading process.S-H-H-H-H

Q: Can you get computer or printer output data? Q
A: Yes. Simulation output (ZQ3 F.S.) is marked with piliake (Mitutoyo); CENTRONICS and direct printability of the test data by a direct-link printer, RS-232C can be set to be connected to a computer, comparing signal output to an extra-sipt OK/NG determination device, and these three are optional..Spunctions.Sp.Sp.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S. Reference: 2V

Q: Can it be installed on test platforms or test platforms? Q
A: Yes. A manual and electric test stand is officially available for assembly, with a more stable and re-reactive test value after the installation of the platform, suitable for a fixed-trip, repeated-test production liner

Q: What happens when you get overloaded?!
A: 150%, which allows a full mass, and a bell warning when 105% reaches, alerts the operator to stop the force. The daily use of the recommendation keeps the measured force within the full range, and the prolonged overload will damage the sensor

Q: How long can a battery be used? How long can it be charged?
A: A built-in nickel cadmium charger cell, which can be used continuously for approximately 10 hours (25°C environment) after full charge, for approximately 6 hours, and for overload design of the recharge circuits; ; Also direct to AC currenters for long periods of time, and specify 100V/ 115V/ 220V when the power is placed on the list

V. Qualified uses

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

ALGOL NK-500 Force Gauges
Force Gauges

ALGOL NK-500 Force Gauges

NK-500
└ ALGOL (Japan)
ALGOL NK-300 Force Gauges
Force Gauges

ALGOL NK-300 Force Gauges

NK-300
└ ALGOL (Japan)
ALGOL NK-200 Force Gauges
Force Gauges

ALGOL NK-200 Force Gauges

NK-200
└ ALGOL (Japan)
ALGOL NK-100 Force Gauges
Force Gauges

ALGOL NK-100 Force Gauges

NK-100
└ ALGOL (Japan)
ALGOL NK-50 Force Gauges
Force Gauges

ALGOL NK-50 Force Gauges

NK-50
└ ALGOL (Japan)
ALGOL NK-30 Force Gauges
Force Gauges

ALGOL NK-30 Force Gauges

NK-30
└ ALGOL (Japan)