ALGOL HF-10 Force Gauges (Model HF-10) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. ALGOL HF-10 Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.
Brand: ALGOL | Category: Force Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | HF-10 |
|---|---|
| Series | ALGOL HF Series Electric Type Force Gauges |
| Maximum Load (N) | 100.00 |
| Maximum Load (Kgf) | 10.000 |
| Maximum Load (Gf) | 10000 |
| Maximum Load (Lbf) | 22.04 |
| Minimum Reading Value (N) | 0.01 |
| Minimum Reading Value (Kgf) | 0.001 |
| Minimum Reading Value (Gf) | 1 |
| Minimum Reading Value (Lbf) | 0.01 |
| Load Unit | N / kgf / (gf) / lbf Switching Type |
| Test Accuracy | ±0.2% F.S. or less (Full Scale) |
| Accuracy | ±0.1% F.S. or less (Full Scale) |
| Speed | 10–320Hz, 6 Range Type Adjustable |
| Sampling Rate | 640 / s |
| Meter Measure Method | Maximum (Peak), Value |
| Display | 4 digits Display Screen ( LCD) |
| A / D | 16 bit times Replace Method |
| Load | 150%(up to to 105% when Warning) |
| Output Signal | Analog ±2V F.S., Digimatic(Mitutoyo), CENTRONICS(), RS-232C(), Comparison Signal () |
| Continuous operating time | Approx. 10 hours (Full Charging, 25℃ Environment) |
| Charging time | Approx. 6 hours (built-in Protection Over Load Charging Assembly) |
| Operating Temperature | 0 ~ +40℃ |
| Power Supply | Rechargeable Battery, AC Flow Device Charging Use (100V / 115V / 220V, Item Specified) |
| Unit Body Weight | Approx. 500g |
| Dimensions | 230 × 65 × 35 mm |
| Standard Supplied Accessories | Test Accessories, AC Flow Device, Signal Output Wire, Signal Output Connection Device, Dedicated Box |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
AoloL Japanese love for KuAgsol Japan love-sustHF-10A single-size-sized, medium-sized, high-sized, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, Test accuracy 0.2%F.S., rediscover accuracy 0.1%F.S. The body contains nickel and cadmium charge batteries, which can be operated with one hand. 0.2%F.S. %F.S.S.XA Z Z S.XCxS.S.S.s 10-320Hz 6 answer speeds combined with 640 return/second sampling to capture peak power of a flash of fracture, stripping, shock, and to stabilize reading of instantaneous values; N, & & & & & & & & & & & & & & & & & & & ; of the & & & & & & & & & & & ; & (gf) lbf Four weight units one switch, one machine covering a variety of working conditions. It is primarily oriented towards conventional measurements: the power value of duct tape stripping, cap opening, rubber stretching, etc. 100N.. A semi-automatic test station may also be installed on a manual or electric test stand. Reference: ALGOL, 100N, 10.000kgf, 22.04lbf, 0.01N, HF
| Model | Maximum Maximum WeightSpwW[ | Minimum read value__BAR_BAR_BAR_BAR_BAR | Fit for positioning |
|---|---|---|---|
| HF-1 | 10.000 N(1.000 kgf;1000.0 gf / 2.204 lbf) | 0.001 N / 0.001 kgf / 0.1 gf / 0.001 lbf | Micrometric measurements% |
| HF-2 | 20.00 N(2.000 kgf;2000 gf / 4.408 lbf) | 0.01 N / 0.001 kgf / 1 gf / 0.001 lbf | Light load measurements%% |
| HF-5 | 50.00 N(5.000 kgf;5000 gf / 11.02 lbf) | 0.01 N / 0.001 kgf / 1 gf / 0.01 lbf | General-type measurements |
| HF-10 | 100.00 N(10.000 kgf;10000 gf / 22.04 lbf) | 0.01 N / 0.001 kgf / 1 gf / 0.01 lbf | General-type measurements%1%2%2 |
| HF-20 | 200.0 N(20.00 kgf;— / 44.08 lbf) | 0.1 N / 0.01 kgf / 0.01 lbf | Medium load measurement%1%2%2% |
| HF-50 | 500.0 N(50.00 kgf;— / 110.2 lbf) | 0.1 N / 0.01 kgf / 0.1 lbf | Load Measurement%1%2 |
| HF-100 | 1000.0 N(100.00 kgf;— / 220.4 lbf) | 0.1 N / 0.01 kgf / 0.1 lbf | Large load measurements%% |
| Interface | Type | Use | Notes |
|---|---|---|---|
| Simulate Output | ±2V F.S. | Logometer, oscillator observation curve | Standard Configuration |
| Digimatic | MitutoyoCharliel | Direct-line Mitutoyo data collector or printer output data | Standard Configuration |
| CENTRONICS | The opposite.! | Directly connected personal computer printers, directly print test results | Purchases |
| RS-232C | Serial | Connect to computers, set parameters, read data | Purchases |
| Compare signal | Connection output | External OK/NG determination and alarm device% | Purchases |
Q: How many steps do you have in the HF series? How?
A: HF series, 7: HF-1 (10N), HF-2 (20N), HF-5 (50N), XIXQ XV XC, XZ XV XV XYZ XYZ XYZ HF-10 (100N), HF-20 (200N), HF-50 (500N), HF-100 (1000N). Q Q, HF-100 (1000N). he selection suggests that daily measurements should be dropped between 20% ~ 80% = the full process: too small a slot would over-inform the alarm and too large a slot would sacrifice reading accuracy
Q: What is the resolution of HF-10?
A: Max. 100N, minimum read 0.01N (0.001kgf/1gf). Note HF-1, HF-10, , HF-10 The three specifications HF-100 display the value 9999, with thousands of digits presented in 1, 0 interactive flash, indicating the actual value shown as 10000
Q: Can you switch the unit of the charge?
A: Yes. This is N/ kgf/ (gf)/ lbf switch, all in four units
Q: How do peaks and instantaneous values change?!
A: PEAK / TRACK on the panel toggle key: PEAK model maintains maximum values during the testing and is suitable for fracking, detaching and plugging peaks; The TRACK mode shows the current stress in real time and is suitable for observation of the loading process.S-H-H-H-H
Q: Can you get computer or printer output data? Q
A: Yes. Simulation output (ZQ3 F.S.) is marked with piliake (Mitutoyo); CENTRONICS and direct printability of the test data by a direct-link printer, RS-232C can be set to be connected to a computer, comparing signal output to an extra-sipt OK/NG determination device, and these three are optional..Spunctions.Sp.Sp.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S. Reference: 2V
Q: Can it be installed on test platforms or test platforms? Q
A: Yes. A manual and electric test stand is officially available for assembly, with a more stable and re-reactive test value after the installation of the platform, suitable for a fixed-trip, repeated-test production liner
Q: What happens when you get overloaded?!
A: 150%, which allows a full mass, and a bell warning when 105% reaches, alerts the operator to stop the force. The daily use of the recommendation keeps the measured force within the full range, and the prolonged overload will damage the sensor
Q: How long can a battery be used? How long can it be charged?
A: A built-in nickel cadmium charger cell, which can be used continuously for approximately 10 hours (25°C environment) after full charge, for approximately 6 hours, and for overload design of the recharge circuits; ; Also direct to AC currenters for long periods of time, and specify 100V/ 115V/ 220V when the power is placed on the list
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.