ALGOL JSV-500D Force & Material Testing (Model JSV-500D) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. ALGOL JSV-500D Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.
Brand: ALGOL | Category: Force & Material Testing
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | JSV-500D |
|---|---|
| Series | JSV Series Type Motorised Unit units (ALGOL JapanALGOL) |
| Maximum Load | 500 N(Approx. 50 kgf) |
| Stroke | 150 mm |
| Specification | 230 mm(Manufacturer Specifications is Interval) |
| Test Speed | 10 ~ 100 mm / minutes, Surface Plate Knob No class Adjustment |
| Surface Plate Control | Power Supply Open (with Indication Lamp), Speed Adjustment Knob, above Shift / / under Shift three Key, above Lower Limit digits Indication |
| Safety Configuration | per Knob (EMERGENCY); above, Lower Limit digits Adjustment Ring |
| Point Load Control | can with HOP-RS Protection Box Setting points Load, to up to Set Value Automatic Unit |
| Power Supply | AC 220V / 2A |
| Dimensions | Width 320 × Depth 300 × Height 590 mm |
| Net Weight | 26 kg |
| Matching Instrument Gauge | Suitable with 10 N ~ 500 N Digital or Pointer Type Force Gauges( optional) |
| Notes | Official Specifications Gauge only Series Load / Stroke / Interval / Dimensions / Weight; Speed, Power Supply is Port Diameter, Item and Sales Accuracy |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
For small electronics, the pressure, damage, break-up tests, the charge weight measurements when the connector inserts the pull-out, and the stretch and compression tests of electronic components, beams, key presses, springs, glues. common in electronic manufacturing,_ (b) Work place for product validation and inspection of materials in the trades of connectors and beam processing, hardware plastics, packaging tape, etc
Q: What push-and-pulsor meters can JSV-500D be attached?
A: Mechanical (point) or digital thrusters for the machine station with a mass of 10 N — 500 N. ALGOL HF series (HF-1 / HF-2 / HF-5 / HF-10 / HF-20 / XSX XV / XV X X X / F-50 / HF-100) and the NK series of pointers (NK-10 — NK-500) can be installed directly on the platform. The meter is selected separately.!
Q: How do you adjust the speed of the test?
A: The speed adjuster button (SPEED CONTROL) on the platform panel is speedless, and rotation allows continuous adjustment between 10 — 100 mm/minutes. Low speeds are appropriate for observing the process of yielding materials and creeping, and high speeds for mass rapid pressure
Q: Is the process 150 mm enough?
A: For the pressure, damage, break-up tests of small electronics and the charge weight measurements of the connector inserted into the pulled out, the 150 mm process is covered enough. if the sample is longer or requires a larger range of moves,_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Platforms of the same series are optional.!
Q: Will the meter be destroyed?
A: Triple protection from the platform: top and bottom limit rings limit the range of the mobile platform; panel stop buttons can be cut off at any time; if you are equipped with HOP-RS protection boxes, you can also preset the end load._ When the test machine reaches the load, it automatically stops and the overloading of the meter is avoided
Q: What does "Interval 230 mm" mean in the specification table?
A: Interval is the name of the field in the original plant specification table, describing the effective spacing (no space) between the platform pillars, this example being 230 mm, on which the width of the clips can be judged. If you need a precise installed hole size, confirm the order and the sale.!
Q: What are the power requirements for the platform?
A: The platform provides electricity from AC 220V/2A, which provides direct access to the national conventional municipal power plugins without additional transformers
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.