Home › Products

Product Overview

IMADA MX-1000N Force & Material Testing (Model MX-1000N) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA MX-1000N Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.

Brand: IMADA | Category: Force & Material Testing

Sales Inquiries: 15626018696 · 78403603@qq.com

IMADA MX-1000N Force & Material Testing

Technical Specifications

ModelMX-1000N
SeriesMX Series Type Motorised Unit units (IMADA JapanIMADA)
TypeType / Type Motorised Unit units (Simple Type)
Maximum Load1000 N
Test Speed8 ~ 240 mm/min
Maximum Sample HeightApprox. 420 mm
Stroke Limitabove, Lower Limit digits Knob Manual Adjustment ( Knob Setting Stroke)
Test ModeManual Mode / Single times Ring Mode / Continuous Ring Mode
Control and Safetyper Knob, Overload , Force Value Control (requires with compatible Measuring Force Meter and Dedicated Cable)
Power SupplyAC100 ~ 240V, 50 / 60Hz(optional 100 / 120 / 230V)
Power Consumption50 W
DimensionsApprox. Width 263 × Depth 368 × Height 903 mm
Net WeightApprox. 24 kg
Optional with-E Speed and Length Meter, -S Length Scale
Matching Measuring Force MeterDST / DSV, ZTS / ZTA Series ( optional)
NotesThis unit units is plus Unit , Force Value by with Force Gauges Reading Output, Force Gauges optional. Speed and Stroke is Manual Knob Setting, not Provided Number digits Setting.

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. A door-level electric loading programme: A power-driven replacement of manual power, with uniform speed and consistent direction, with greater repetition than manual, but at much lower cost than a standard platform. —
  2. Process is set manually by the side button: the top and bottom bit buttons directly jam the process range without the menu setting, adjusting the speed when changing products
  3. Three test models: the manual mode of moving the top/down buttons, with single loops and continuous circulation patterns replaying between the position limits and suitable for the extended test
  4. Power control and overload protection: in conjunction with compatible measurement and special cable, stop when preset values are reached and have overload stop and stop buttons to protect the meter
  5. Broad voltage design: AC100 — 240V adapts itself, with the option 100 / 120 / 230V for export and domestic use
  6. (b) A compact structure: the aircraft is small and can be used directly at the laboratory or production liner

Applied trade & test object

Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wires, etc., stretching, compressing, stripping, plugging, etc. The curves and damage tests impose a stable, consistent load. The electronics, connectors and beams, auto parts, hardware plastics, packaging printing, medical equipment and the materials testing, research and development of certification and the grade of the gymnastics.Stights and test materials

FAQ

Q: The MX series contains a non-pull puller?

A: Excludes. The platform is only loaded with the implementing agency and the force value is read out by the thrusting measure attached.. The station can be equipped with a separate IMADA (IMADA) ZTS/ZTA or DST/DSV high-value ratio booster. / DSV XVV XV XV elect the corresponding process according to the range of measured values

Q: What are the stages of the thruster that can be assigned to the platform?

A: DST/DSV, ZTS/ZTA series thrust meters, with the following sequences, which are officially appropriate. The actual measurement cap is based on the desktop capacity 1000 N - when the measurement of force is greater than the desktop capacity, only the desktop capacity is measured..SQ capacity is the maximum capacity of the platform. Reference: 1000 N

Q: Can speed be set numerically? Q

A: No. The MX series is simple, with the panel buttons adjusted. The speed is adjusted by the panel button between 8 ~ 240 mm/min, the process is determined by the top and bottom slot buttons. No digitized speed and process setting; if numbers are required to set speed, count and time, select the MX2/ MX3 series

Q: What are the tests suitable for?!??

A: A suitable for conventional stretching, compression, stripping and plug-in tests, and durable tests that need to be repeated between position limits. Because speed and process cannot be quantified, it is more suitable for testing the production line scenes with fixed test conditions and repeated batches

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

IMADA ZU-20kN Force & Material Testing
Force & Material Testing

IMADA ZU-20kN Force & Material Testing

ZU-20kN
└ IMADA (Japan)
IMADA ZU-10kN Force & Material Testing
Force & Material Testing

IMADA ZU-10kN Force & Material Testing

ZU-10kN
└ IMADA (Japan)
IMADA XY-500N-EZ Force & Material Testing
Force & Material Testing

IMADA XY-500N-EZ Force & Material Testing

XY-500N-EZ
└ IMADA (Japan)
IMADA XY-500N-M8 Force & Material Testing
Force & Material Testing

IMADA XY-500N-M8 Force & Material Testing

XY-500N-M8
└ IMADA (Japan)
IMADA XY-500N-BB Force & Material Testing
Force & Material Testing

IMADA XY-500N-BB Force & Material Testing

XY-500N-BB
└ IMADA (Japan)
IMADA XY-500N Force & Material Testing
Force & Material Testing

IMADA XY-500N Force & Material Testing

XY-500N
└ IMADA (Japan)