IMADA MX2-1000N Force & Material Testing (Model MX2-1000N) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA MX2-1000N Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force & Material Testing
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | MX2-1000N |
|---|---|
| Series | MX2 Series Type Standard Motorised Unit units (IMADA JapanIMADA) |
| Type | Type / Standard Type Motorised Unit units (Standard Type) |
| Maximum Load | 1000 N |
| Test Speed | Number digits 10 ~ 300 mm / min(10 ~ 20: 0.5 mm / min; 20 ~ 100: 5 mm / min; 100 ~ 300: 10 mm / min) |
| Maximum Sample Height | Approx. 300 mm |
| Structure Degree | Standard Type 0.5 mm or less; Length Stroke (-L)1.0 mm or less |
| Stroke Limit | above, Lower Limit digits Knob + Number digits Stroke Setting |
| Test Mode | Manual Mode / JOG Micro Mode / Ring Mode |
| Counting and When | Counting: up to 65535 times; Setting when: most Length 99 Division 59.9 s (0.1 s ) |
| Control and Safety | per Knob, Force Value Control, Overload (requires with compatible Measuring Force Meter and Dedicated Cable) |
| Power Supply | AC100 ~ 240V, 50 / 60Hz(optional 100 / 120 / 230V) |
| Power Consumption | 50 W |
| Dimensions | Approx. Width 280 × Depth 410 × Height 660 mm |
| Net Weight | Approx. 19 kg |
| Optional with | -L Stroke +300mm, -CN external Connection Signal Input, -S Length Scale, -FA Built-in Linear Scale, -V75 / -V150 / -V750 / -V1000 Speed Range more |
| Matching Measuring Force Meter | DST / DSV, ZTS / ZTA Series ( optional) |
| Notes | This unit units is plus Unit , Force Value by with Force Gauges Reading Output, Force Gauges optional. |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wires, etc., stretching, compressing, stripping, plugging, etc. The curves and damage tests impose a stable, consistent load. The electronics, connectors and beams, auto parts, hardware plastics, packaging printing, medical equipment and the materials testing, research and development of certification and the grade of the gymnastics.Stights and test materials
Q: The MX2 series contains a non-pull puller?
A: Excludes. The platform is only loaded with the implementing agency and the force value is read out by the thrusting measure attached.. The station can be equipped with a separate IMADA (IMADA) ZTS/ZTA or DST/DSV high-value ratio booster. / DSV XVV XV XV elect the corresponding process according to the range of measured values
Q: What are the stages of the thruster that can be assigned to the platform?
A: DST/DSV, ZTS/ZTA series thrust meters, with the following sequences, which are officially appropriate. The actual measurement cap is based on the desktop capacity 1000 N - when the measurement of force is greater than the desktop capacity, only the desktop capacity is measured..SQ capacity is the maximum capacity of the platform. Reference: 1000 N
Q: What's the use of JOG micro-motion?
A: JOG mode spin-down button with a meter moving 0.05 mm per rotation, used to accurately preload knives, zero points or very small sizes of samples, more fine than press the direction key, Tests of bruising samples and microtrips are particularly suitable
Q: How do cycling models and durability tests work?!?
A: In circular mode, the meter automatically repeats between top and bottom buttons; the number of times set by the counter (up to 65535 times) and the time-frame set by the time-frame automatically completes the plug-in, key-pressive life, Spring fatigue waits for the retesting
Q: How much longer can a long-term process (-L) be?!
A: The current type of aircraft is, as official specifications, capable of loading -L long-distance options and of a longer-ranged process 300mm, which is suitable for situations where the sample is detected in longer or greater mobile range
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.