Home › Products

Product Overview

IMADA MX2-5000N Force & Material Testing (Model MX2-5000N) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA MX2-5000N Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.

Brand: IMADA | Category: Force & Material Testing

Sales Inquiries: 15626018696 · 78403603@qq.com

IMADA MX2-5000N Force & Material Testing

Technical Specifications

ModelMX2-5000N
SeriesMX2 Series Type Standard Motorised Unit units (IMADA JapanIMADA)
TypeType / Standard Type Motorised Unit units (Standard Type)
Maximum Load5000 N
Test SpeedNumber digits 0.5 ~ 300 mm / min(0.5 ~ 20: 0.5 mm / min; 20 ~ 100: 5 mm / min; 100 ~ 300: 10 mm / min)
Maximum Sample HeightApprox. 380 mm
Structure DegreeStandard Type 0.5 mm or less; Length Stroke (-L)1.0 mm or less
Stroke Limitabove, Lower Limit digits Knob + Number digits Stroke Setting
Test ModeManual Mode / JOG Micro Mode / Ring Mode
Counting and WhenCounting: up to 65535 times; Setting when: most Length 99 Division 59.9 s (0.1 s )
Control and Safetyper Knob, Force Value Control, Overload (requires with compatible Measuring Force Meter and Dedicated Cable)
Power SupplyAC100 ~ 240V, 50 / 60Hz(optional 100 / 120 / 230V)
Power Consumption150 W
DimensionsApprox. Width 295 × Depth 444 × Height 823 mm
Net WeightApprox. 51 kg
Optional with-EXT plus Length 200mm, -CN external Connection Signal Input, -S Length Scale, -FA Built-in Linear Scale
Matching Measuring Force MeterDST / DSV, ZTS / ZTA Series ( optional)
NotesThis unit units is plus Unit , Force Value by with Force Gauges Reading Output, Force Gauges optional.

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. Speed numeric setting: The panel is digitally set to start, measure, and return three segments of speed, repeating the test condition one key, which is much more accurate than the spin button estimates
  2. Counting and timing: The built-in counter (maximum 65535) and the timer (maximum 99 minutes 59.9 seconds) are automatically completed for the duration of the reducible and intermittent loading test
  3. Three measurement models: manual mode to move with top/down buttons, JOG to spin buttons for a micro-entry of 0.05 mm (very convenient for the knife), loop mode to automatically repeat between position limits
  4. Higher structure: Aerodynamics are better than simple, long-haul versions are still controlled below 1.0 mm, and the aircraft shelf is smaller and readable during loading
  5. Force association: The excess stoppage, force control (arrival to the set value automatically stops or reverses) and measurement speeds can be automatically switched in conjunction with the ZTS/ZTA meter and the dedicated cable
  6. Options: you can load long processes (-L/-2L), length rulers (-S), external signal input output (-CN),. Internal linear rulers (-FA) and speed range changes (-V).S-V
  7. Width voltage and low power: AC100 — 240V self-adaptation, power 150 W, both laboratory and production lines are directly available

Applied trade & test object

Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wires, etc., stretching, compressing, stripping, plugging, etc. The curves and damage tests impose a stable, consistent load. The electronics, connectors and beams, auto parts, hardware plastics, packaging printing, medical equipment and the materials testing, research and development of certification and the grade of the gymnastics.Stights and test materials

FAQ

Q: The MX2 series contains a non-pull puller?

A: Excludes. The platform is only loaded with the implementing agency and the force value is read out by the thrusting measure attached.. The station can be equipped with a separate IMADA (IMADA) ZTS/ZTA or DST/DSV high-value ratio booster. / DSV XVV XV XV elect the corresponding process according to the range of measured values

Q: What are the stages of the thruster that can be assigned to the platform?

A: DST/DSV, ZTS/ZTA series thrust meters, with the following sequences, which are officially appropriate. The actual measurement cap is based on the desktop capacity 5000 N - when the measurement of force is greater than the desktop capacity, only the desktop capacity is measured..SQ capacity is the maximum capacity of the platform. Reference: 5000 N

Q: What's the use of JOG micro-motion?

A: JOG mode spin-down button with a meter moving 0.05 mm per rotation, used to accurately preload knives, zero points or very small sizes of samples, more fine than press the direction key, Tests of bruising samples and microtrips are particularly suitable

Q: How do cycling models and durability tests work?!?

A: In circular mode, the meter automatically repeats between top and bottom buttons; the number of times set by the counter (up to 65535 times) and the time-frame set by the time-frame automatically completes the plug-in, key-pressive life, Spring fatigue waits for the retesting

Q: How much longer can a long-term process (-L) be?!

A: This type does not provide a long-distance process -L option, as specified by the official specifications, and changes to -EXT pillar length 200mm (longer pillar but same process) Fits for situations where the sample is longer or requires a greater range of movement

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

IMADA ZU-20kN Force & Material Testing
Force & Material Testing

IMADA ZU-20kN Force & Material Testing

ZU-20kN
└ IMADA (Japan)
IMADA ZU-10kN Force & Material Testing
Force & Material Testing

IMADA ZU-10kN Force & Material Testing

ZU-10kN
└ IMADA (Japan)
IMADA XY-500N-EZ Force & Material Testing
Force & Material Testing

IMADA XY-500N-EZ Force & Material Testing

XY-500N-EZ
└ IMADA (Japan)
IMADA XY-500N-M8 Force & Material Testing
Force & Material Testing

IMADA XY-500N-M8 Force & Material Testing

XY-500N-M8
└ IMADA (Japan)
IMADA XY-500N-BB Force & Material Testing
Force & Material Testing

IMADA XY-500N-BB Force & Material Testing

XY-500N-BB
└ IMADA (Japan)
IMADA XY-500N Force & Material Testing
Force & Material Testing

IMADA XY-500N Force & Material Testing

XY-500N
└ IMADA (Japan)