Home › Products

Product Overview

IMADA EMX-1000N Force & Material Testing (Model EMX-1000N) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA EMX-1000N Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.

Brand: IMADA | Category: Force & Material Testing

Sales Inquiries: 15626018696 · 78403603@qq.com

IMADA EMX-1000N Force & Material Testing

Technical Specifications

ModelEMX-1000N
SeriesEMX Series Type Height Functions Motorised Unit units (IMADA JapanIMADA)
TypeType / Height Functions Type Motorised Unit units (Advanced Type)
Maximum Load1000 N
Test Speed0.5 ~ 600 mm/min(0.5 ~ 20:0.5 mm/min;20 ~ 100:5 mm/min;100 ~ 600:10 mm/min)
Maximum Sample Height310 mm
Structure DegreeStandard Type 0.25 mm or less; Length Stroke (-L)0.6 mm or less
Stroke Limitabove, Lower Limit digits Knob + Number digits Displacement Limit digits (0.1 mm )
Test ModeManual Mode / JOG Micro Mode / Ring Mode
Counting and WhenCounting: up to 65535 times; Setting when: most Length 99 Division 59.9 s (0.1 s )
Conditions MemoryStorable 5 groups Test Conditions (incl. Conditions Control)
Detection FunctionsCONTACT DETECTION(Contact Detection), BREAK DETECTION( Detection), two not can Same when Operating
Control and Safetyper Knob, Force Value Control, Overload , External Signal Input, Single Setting
Power SupplyAC100 ~ 240V, 50 / 60Hz(optional 100 / 120 / 230V)
Power Consumption50 W
DimensionsApprox. Width 280 × Depth 410 × Height 643 mm
Net WeightApprox. 24 kg
Optional with-L(Stroke +300mm), -FA Built-in Linear Scale
Matching Measuring Force MeterDST / DSV, ZTS / ZTA Series ( optional)
NotesThis unit units is plus Unit , Force Value by with Force Gauges Reading Output, Force Gauges optional. Displacement can Number digits Setting, Repeat Positioning Accuracy Height at Standard Type.

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. High function type: The standard type of MX2 has increased digital shift settings and exposure/ break-up detection and has expanded to 0.5 ~ 600 mm/min
  2. Digital shift: The process can be digitized over 0.1 mm step by step, in line with the high-stress body (below 0.25 mm), and the accuracy of the repeated positioning is significantly increased
  3. Exposure / Fracture detection: Automatically identify the moment when the head is just exposed to the sample (CONTACT) or the sample is broken (BREAK), automatically record the data at the point, key lifetime, connector plug-in, Tests such as material damage need not be manually targeted.!
  4. High-stress structure: Aerobody is better than standard (below 0.25 mm), the frame is very small in shape during loading, and the power-side shift data are more real
  5. 5 Group conditions stored: Common test conditions are stored on the platform, one key is called when the line is changed, reducing the time of the change and the artificial setting error
  6. Wide-range: very slow to observe yield and wormage at 0.5 mm/min, fast enough for batch testing at 600 mm/min, one covering multiple conditions
  7. Security and connectivity: Accelerator buttons, force level controls, overload stop-ins are ready for external signal input, and access to production lines is interlocking and security doors

Applied trade & test object

Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wires, etc., stretching, compressing, stripping, plugging, etc. The curves and damage tests impose a stable, consistent load. The electronics, connectors and beams, auto parts, hardware plastics, packaging printing, medical equipment and the materials testing, research and development of certification and the grade of the gymnastics.Stights and test materials

FAQ

Q: The EMX series contains a non-pull puller?

A: Excludes. The platform is only loaded with the implementing agency and the force value is read out by the thrusting measure attached.. The station can be equipped with a separate IMADA (IMADA) ZTS/ZTA or DST/DSV high-value ratio booster. / DSV XVV XV XV elect the corresponding process according to the range of measured values

Q: What are the stages of the thruster that can be assigned to the platform?

A: DST/DSV, ZTS/ZTA series thrust meters, with the following sequences, which are officially appropriate. The actual measurement cap is based on the desktop capacity 1000 N - when the measurement of force is greater than the desktop capacity, only the desktop capacity is measured..SQ capacity is the maximum capacity of the platform. Reference: 1000 N

Q: What is the difference between exposure and fracture detection?

A: CONTACT DETECTION recorded the position as soon as the sample was first exposed to the head and the force value rose from zero; BREAK DETECTION recorded the position as soon as the sample was broken and the force dropped. he two are used to determine the starting and the destruction points respectively, but the official indication is that they cannot be used simultaneously.?

Q: EMX and MX2

A: MX2 is sufficient if only numbers are required to set speed, count and time; if digital displacement is also required, contact/ break detection, A wider 0.5 — 600 mm/min speed range and higher airframe readiness, with EMX selected

Q: What use is the built-in linear ruler for --FA?

A:-FA has linear scales on the platform for the output of the migration data for the meter; and the measurement meters (e.g. ZTA series) and special cable to support the displacement of the I/O, Qatar It's a power-diversion analysis.!

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

IMADA ZU-20kN Force & Material Testing
Force & Material Testing

IMADA ZU-20kN Force & Material Testing

ZU-20kN
└ IMADA (Japan)
IMADA ZU-10kN Force & Material Testing
Force & Material Testing

IMADA ZU-10kN Force & Material Testing

ZU-10kN
└ IMADA (Japan)
IMADA XY-500N-EZ Force & Material Testing
Force & Material Testing

IMADA XY-500N-EZ Force & Material Testing

XY-500N-EZ
└ IMADA (Japan)
IMADA XY-500N-M8 Force & Material Testing
Force & Material Testing

IMADA XY-500N-M8 Force & Material Testing

XY-500N-M8
└ IMADA (Japan)
IMADA XY-500N-BB Force & Material Testing
Force & Material Testing

IMADA XY-500N-BB Force & Material Testing

XY-500N-BB
└ IMADA (Japan)
IMADA XY-500N Force & Material Testing
Force & Material Testing

IMADA XY-500N Force & Material Testing

XY-500N
└ IMADA (Japan)