IMADA MH2-500N Force & Material Testing (Model MH2-500N) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA MH2-500N Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force & Material Testing
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | MH2-500N |
|---|---|
| Series | MH2 Series Type Standard Motorised Unit units (IMADA JapanIMADA) |
| Type | Type / Standard Type Motorised Unit units (Horizontal, Standard Type) |
| Maximum Load | 500 N |
| Test Speed | Number digits 10 ~ 300 mm / min(10 ~ 20: 0.5 mm / min; 20 ~ 100: 5 mm / min; 100 ~ 300: 10 mm / min) |
| Maximum Sample Length | Approx. 245 mm |
| Structure Degree | Standard Type 0.5 mm or less |
| Stroke Limit | Horizontal Knob Control above, Lower Limit digits |
| Test Mode | Manual Mode / JOG Micro Mode / Ring Mode |
| Counting and When | Counting: up to 65535 times; Setting when: most Length 99 Division 59.9 s (0.1 s ) |
| Control and Safety | per Knob, Force Value Control, Overload (requires with compatible Measuring Force Meter and Dedicated Cable) |
| Power Supply | AC100 ~ 240V, 50 / 60Hz(optional 100 / 120 / 230V) |
| Power Consumption | 50 W |
| Dimensions | Approx. Width 554 × Depth 220 × Height 219 mm |
| Net Weight | Approx. 14 kg |
| Optional with | -CN external Connection Signal Input, -S Length Scale, -FA Built-in Linear Scale, -V45 / -V90 / -V450 / -V600 / -V900 Speed Range more |
| Matching Measuring Force Meter | DST / DSV, ZTS / ZTA Series ( optional) |
| Notes | This unit units is plus Unit , Force Value by with Force Gauges Reading Output, Force Gauges optional. |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wires, etc., stretching, compressing, stripping, plugging, etc. The curves and damage tests impose a stable, consistent load. The electronics, connectors and beams, auto parts, hardware plastics, packaging printing, medical equipment and the materials testing, research and development of certification and the grade of the gymnastics.Stights and test materials
Q: The MH2 series contains a non-pull puller?
A: Excludes. The platform is only loaded with the implementing agency and the force value is read out by the thrusting measure attached.. The station can be equipped with a separate IMADA (IMADA) ZTS/ZTA or DST/DSV high-value ratio booster. / DSV XVV XV XV elect the corresponding process according to the range of measured values
Q: What are the stages of the thruster that can be assigned to the platform?
A: DST/DSV, ZTS/ZTA series thrust meters, with the following sequences, which are officially appropriate. The actual measurement cap is based on the desktop capacity 500 N - when the measurement of force is greater than the desktop capacity, only the desktop capacity is measured..SQ capacity is the maximum capacity of the platform. Reference: 500 N
Q: How do you load the bedside?!
A: Samples are horizontally placed on the platform, with a fixed, end-to-end relay meter that can be used to set the travel limit by spinning the horizontal button. Long strips, snippets, and cable sample clips are easily packed and matched
Q: What's the use of JOG micro-motion?
A: JOG mode spins the knob with a meter moving 0.05 mm per rotation, used to accurately preload knives, zero points or to impose very small preloads, which are more fine than press the direction key
Q: Can you add the length ruler?
A: Yes. Optional -S length ruler, showing the distance of the measurement machine directly on the platform; optional -FA linear ruler, if force-positioning is required. -S-S length ruler.-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S- Use the measurement for supporting the displacement of I/O.!
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.