IMADA SVH-1000N Force & Material Testing (Model SVH-1000N) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA SVH-1000N Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force & Material Testing
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | SVH-1000N |
|---|---|
| Series | SVH Series Type Manual Test Unit units (IMADA JapanIMADA) |
| Type | Type / Type Manual Test Unit units (Handle Type) |
| Maximum Load | 1000 N |
| Maximum Sample Height | Approx. 225 mm(units Surface to Measure Rod Tip, Installed ZTS / ZTA ≤1000N General-purpose Type when) |
| Maximum Stroke | 60 mm |
| Quantity | 3 mm / 1 Rotation () |
| Operation Method | Rotatable plus |
| Dimensions | Approx. Width 200 × Depth 280 × Height 410 mm |
| Net Weight | Approx. 7.7 kg |
| Optional with | -S Length Scale, -EXT Extended Column (Stroke Unchanged) |
| Matching Measuring Force Meter | DST / DSV, ZTS / ZTA Series ( optional) |
| Notes | This unit units is plus Unit , Force Value by with Force Gauges Reading Output, Force Gauges optional. Type , Force Flat , Suitable requires Setting plus Manual Test. |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wires, etc., stretching, compressing, stripping, plugging, etc. The curves and damage tests impose a stable, consistent load. The electronics, connectors and beams, auto parts, hardware plastics, packaging printing, medical equipment and the materials testing, research and development of certification and the grade of the gymnastics.Stights and test materials
(a) The method of loading the meter into the platform installation, the corresponding kit between the meter and the platform, and the handle handles of the hand when the sample is placed, and the station provides a constant elastic angle of power;_ The test conditions for the same samples were therefore more consistent and more repetitive than hand-held measurements
The loading of the clamp-tocking equipment on the platform also requires an official additional GF-1/GF-2 relay (officially marked as a transfer necessary to install the clamp-tock on the platform, to be sold); -EXT plus long columns and -S length scale are also official optionals
Sample height description: The maximum sample height (or maximum sample length) in the specification indicates the distance between the table floor and the screw of the forceometer (the gauge is at the highest point, ZT Generalized 1000N and below; 3000N is calculated as a large-capacity type in the ZT series, without a thick content, The actual availability of heights varies slightly depending on the packaging.!
Q: The SVH-1000N platform contains a non-pull puller?
A: Excludes. The platform is only loaded with the implementing agency and the force value is read out by the thrusting measure attached.. The station can be equipped with a separate IMADA (IMADA) ZTS/ZTA or DST/DSV high-value ratio booster. / DSV XVV XV XV elect the corresponding process according to the range of measured values
Q: What are the stages of the thruster that can be assigned to the platform?
A: DST/DSV, ZTS/ZTA series thrust meters, with the following sequences, which are officially appropriate. The actual measurement cap is based on the desktop capacity 1000 N - when the measurement of force is greater than the desktop capacity, only the desktop capacity is measured..SQ capacity is the maximum capacity of the platform. Reference: 1000 N
Q: What's the difference between SVH and SVL? Q: Q: Q
A: The two dimensions of capacity, sample height, and process are identical to the shape, and are distinguished in the way of operation: SVH-1000N is a hand handle (a turn-on handle load) and SVL-1000N is a wrench (a pressure-loading wrench). Quest — A: A: A:A: A:A: The size of the sample, as well as the process is the same size as the process: QZX Hand handles are more smooth and the wrench is more efficient
Q: How does the maximum sample height 225 mm count?
A: Pointing to the extreme distance of the measurement pole (when the meter is raised to the highest position and is installed in ZTS/ZTA 1000N Generalized), without the thickness of the clip, the actual usable heights will vary slightly depending on the clip. 1000N — not the thickness of the clips, and the actual usable heights will vary
Q: Do you need a power supply?
A: No. The platform is a purely manual mechanical structure, not requiring electricity, and is available with a push-and-pull array, suitable for unelectrical spaces or for situations sensitive to the electromagnetic environment
Q: Are the clips and relays randomly attached?
A: No collateral. The machine is only equipped with the machine's own body and the modeling and the meter, the clip and the switch are to be selected separately. The clips are selected by the sample shape and size - stretching the clip, compressing the presses, removing the wheeling and so on; Specific models can be confirmed by call.!
Q: How do you choose a hand and an electric platform?!
A: A simple, power-free, low cost, fixed-loaded angle and fixed-in-take load for a manual platform suitable for routine tests and tests with small sample size and low force value; if a numerical speed and process is required, loop load, Bulk automatic testing or force control, please select the MX/MX2/MX3/EMX series power-motivator station
Q: Will the process change after the installation of the -- EXT pillar?
A: No. Officially, the length poles are just high and the loading space is expanded, and the process of the meter remains constant; if longer distances are required, the distance is not enough. Please select a HV series for manual or MX series for power.SpunnerStampSt
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.