IMADA HV-1000N Force & Material Testing (Model HV-1000N) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA HV-1000N Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force & Material Testing
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | HV-1000N |
|---|---|
| Series | HV Series Type Length Stroke Manual Test Unit units (IMADA JapanIMADA) |
| Type | Type / Length Stroke Type Manual Test Unit units (Long Stroke Type) |
| Maximum Load | 1000 N |
| Plus Method | Rod 3mm Guide Range |
| Quantity | 1.2 mm / 1 Rotation |
| Maximum Sample Height | Approx. 375 mm |
| Unit Surface Material | not Steel |
| Measuring Force Meter Installation Thread | M6 |
| Operation Method | Rotatable plus |
| Dimensions | Approx. Width 325 × Depth 275 × Height 730 mm |
| Net Weight | Approx. 18 kg |
| Optional with | -L Stroke +150mm, -S Length Scale |
| Matching Measuring Force Meter | DST / DSV, ZTS / ZTA Series ( optional) |
| Notes | This unit units is plus Unit , Force Value by with Force Gauges Reading Output, Force Gauges optional. Length Stroke Meter, Suitable Height Rate or Length Dimensions Sample. |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wires, etc., stretching, compressing, stripping, plugging, etc. The curves and damage tests impose a stable, consistent load. The electronics, connectors and beams, auto parts, hardware plastics, packaging printing, medical equipment and the materials testing, research and development of certification and the grade of the gymnastics.Stights and test materials
The practical significance of the long-range process: the gauge is more mobile than the normal manual table, so high-extensible rubber, elastomers, film, foam cotton, and long-sized wire, style, plate, All can be pulled up to a sufficiently long stretch in one clip without having to reload it in the middle and reduce the data deviations resulting from the secondary clip
(a) The method of loading the meter into the platform installation, the corresponding kit between the meter and the platform, and the handle handles of the hand when the sample is placed, and the station provides a constant elastic angle of power;_ The test conditions for the same samples were therefore more consistent and more repetitive than hand-held measurements
Sample height description: The maximum sample height (or maximum sample length) in the specification indicates the distance between the table floor and the screw of the forceometer (the gauge is at the highest point, ZT Generalized 1000N and below; 3000N is calculated as a large-capacity type in the ZT series, without a thick content, The actual availability of heights varies slightly depending on the packaging.!
Q: The HV series contains a non-pull puller?
A: Excludes. The platform is only loaded with the implementing agency and the force value is read out by the thrusting measure attached.. The station can be equipped with a separate IMADA (IMADA) ZTS/ZTA or DST/DSV high-value ratio booster. / DSV XVV XV XV elect the corresponding process according to the range of measured values
Q: What are the stages of the thruster that can be assigned to the platform?
A: DST/DSV, ZTS/ZTA series thrust meters, with the following sequences, which are officially appropriate. The actual measurement cap is based on the desktop capacity 1000 N - when the measurement of force is greater than the desktop capacity, only the desktop capacity is measured..SQ capacity is the maximum capacity of the platform. Reference: 1000 N
Q: What is the sample for the HV series?
A: The HV series of long-range travels, suitable for stretching tests of high-extenssion material (rubber, elastomers, film, foam cotton) and long-sized samples, are also used for stripping and bending tests requiring a large moving distance. :Astro-Draw-Trough-Trough-Trough-Trough-Tracking test
Q: What does the amount of progress mean by 1.2 mm/ 1 turns?
A: Pointing to a wheel, the measurement machine moves at a distance of 1.2 mm/ 1. The smaller the inbound quantity, the finer the load, the easier to observe the yield and break
Q: Why is there no long-distance option for HV-3000N?
A: The official specification of HV-3000N provides only -S length rule options, not -L long-distance options;_ HV-500NII and HV-1000N may be increased by 200 mm and 150 mm respectively
Q: Are the clips and relays randomly attached?
A: No collateral. The machine is only equipped with the machine's own body and the modeling and the meter, the clip and the switch are to be selected separately. The clips are selected by the sample shape and size - stretching the clip, compressing the presses, removing the wheeling and so on; Specific models can be confirmed by call.!
Q: How do you choose a hand and an electric platform?!
A: A simple, power-free, low cost, fixed-loaded angle and fixed-in-take load for a manual platform suitable for routine tests and tests with small sample size and low force value; if a numerical speed and process is required, loop load, Bulk automatic testing or force control, please select the MX/MX2/MX3/EMX series power-motivator station
Q: What about the HV and SH series?
A: HV is a stand, SH is a sleeper. The HV sample is placed in a vertical position suitable for stretching and compression; the SH sample is placed horizontally, and the clips and pairs are easier to fit. The size of the sample is different: HV with 500N/ 1000N/ 3000N, SH has 1000N/ 3000N
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.