IMADA SH-1000N Force & Material Testing (Model SH-1000N) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA SH-1000N Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force & Material Testing
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | SH-1000N |
|---|---|
| Series | SH Series Type Manual Test Unit units (IMADA JapanIMADA) |
| Type | Type / Manual Test Unit units (Horizontal, Manual Type) |
| Maximum Load | 1000 N |
| Plus Method | Rod 3mm Guide Range |
| Quantity | 1.2 mm / 1 Rotation |
| Maximum Sample Length | Approx. 250 mm |
| Operation Method | Rotatable plus |
| Dimensions | Approx. Width 560.5 × Depth 265 × Height 219.5 mm |
| Net Weight | Approx. 15 kg |
| Optional with | -S Length Scale |
| Matching Measuring Force Meter | DST / DSV, ZTS / ZTA Series ( optional) |
| Notes | This unit units is plus Unit , Force Value by with Force Gauges Reading Output, Force Gauges optional. Type Structure, Sample , Installed Clamp Method . |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wires, etc., stretching, compressing, stripping, plugging, etc. The curves and damage tests impose a stable, consistent load. The electronics, connectors and beams, auto parts, hardware plastics, packaging printing, medical equipment and the materials testing, research and development of certification and the grade of the gymnastics.Stights and test materials
(a) The method of loading the meter into the platform installation, the corresponding kit between the meter and the platform, and the handle handles of the hand when the sample is placed, and the station provides a constant elastic angle of power;_ The test conditions for the same samples were therefore more consistent and more repetitive than hand-held measurements
Long sample chargers: the bed-frame structure allows cable, tape, film and model materials to be levelled on the platform, each to be fixed on the table and the metering set, and the packaging is easier to fit than the pair. The test also does not affect the sample during the test process by being self-reflective.!
Sample height description: The maximum sample height (or maximum sample length) in the specification indicates the distance between the table floor and the screw of the forceometer (the gauge is at the highest point, ZT Generalized 1000N and below; 3000N is calculated as a large-capacity type in the ZT series, without a thick content, The actual availability of heights varies slightly depending on the packaging.!
Q: The SH series contains a non-pull puller?
A: Excludes. The platform is only loaded with the implementing agency and the force value is read out by the thrusting measure attached.. The station can be equipped with a separate IMADA (IMADA) ZTS/ZTA or DST/DSV high-value ratio booster. / DSV XVV XV XV elect the corresponding process according to the range of measured values
Q: What are the stages of the thruster that can be assigned to the platform?
A: DST/DSV, ZTS/ZTA series thrust meters, with the following sequences, which are officially appropriate. The actual measurement cap is based on the desktop capacity 1000 N - when the measurement of force is greater than the desktop capacity, only the desktop capacity is measured..SQ capacity is the maximum capacity of the platform. Reference: 1000 N
Q: What are the samples suitable for the bedside manual?!?
A: A sample of long strips, fragments and cables. Samples are placed horizontally, packed and intertwined, often used for cable stretching, end-pluging, tape stripping and stagger stretching tests
Q: What does the amount of progress mean by 1.2 mm/ 1 turns?
A: Pointing to a wheel, the gauge moves at a distance of 1.2 mm/ 1. The smaller the inbound, the more fine the load
Q: Do you need a power supply?
A: No. The platform is a purely manual mechanical structure, not requiring electricity, and is available with a push-and-pull array, suitable for unelectrical spaces or for situations sensitive to the electromagnetic environment
Q: Are the clips and relays randomly attached?
A: No collateral. The machine is only equipped with the machine's own body and the modeling and the meter, the clip and the switch are to be selected separately. The clips are selected by the sample shape and size - stretching the clip, compressing the presses, removing the wheeling and so on; Specific models can be confirmed by call.!
Q: How do you choose a hand and an electric platform?!
A: A simple, power-free, low cost, fixed-loaded angle and fixed-in-take load for a manual platform suitable for routine tests and tests with small sample size and low force value; if a numerical speed and process is required, loop load, Bulk automatic testing or force control, please select the MX/MX2/MX3/EMX series power-motivator station
Q: What about the SH and HV series?
A: SH is a bed, HV is a stand-alone. (SH) samples are placed horizontally, packed and paired more easily and suitable for long strips, snippets and cable samples; The volume is also different: SH has 1000N/3000N,Stamps are not available for the use of the software.Stamps are not available for the use of the software.s are not available for the use of the software.ssStamps are not available for the use of the software.s are not available for the use of the software.s are not available for the use of the software.s are not available for the use of the software HV has 500N/ 1000N/ 3000N. Reference: HV
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.