IMADA FCA-50N Force & Material Testing (Model FCA-50N) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA FCA-50N Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force & Material Testing
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | FCA-50N |
|---|---|
| Series | FCA Series Portable Type Wrench Rod Test Unit units (IMADA JapanIMADA) |
| Type | Portable / Type Wrench Rod Unit units (Compact, Lever Type) |
| Maximum Load | 50 N |
| Stroke | 0 ~ 45 mm(Limit Knob Adjustable) |
| Maximum Sample Height | 80 mm(Installed DST / DSV Series when, units Surface to Measure Rod Tip) |
| Operation Method | Pressure under Wrench Rod plus |
| Dimensions | Approx. Width 175 × Height 296 × Depth 178 mm |
| Net Weight | Approx. 3 kg |
| with Measuring Force Meter | DST/DSV-2N ~ 1000N、ZTS/ZTA-2N ~ 1000N |
| Not Applicable Measuring Force Meter | ZTS / ZTA-2500N ~ 5000N, DPU / DPUH Series, FB / FS / PS / PSS / PSM Series, PSH Series |
| Notes | This unit units is plus Unit , Force Value by with Force Gauges Reading Output, Force Gauges optional. Portable , can or Position at Surface, Suitable Multi Angle and Small Stroke Test. |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wires, etc., stretching, compressing, stripping, plugging, etc. The curves and damage tests impose a stable, consistent load. The electronics, connectors and beams, auto parts, hardware plastics, packaging printing, medical equipment and the materials testing, research and development of certification and the grade of the gymnastics.Stights and test materials
(a) The method of loading the meter into the platform assembly, the corresponding kit between the meter and the platform, which is loaded by pressure on the trigger after the sample is placed; the platform provides a constant elastic angle of application;_ The test conditions for the same samples were therefore more consistent and more repetitive than hand-held measurements
Value of the load: Many of the small force tests do not concern " pull-off ", but " how hard it takes to press a position ", such as the touch-squeezing, the action of the switch, and the insertion of the end. FCA-50N sets the moving distance of the measurement machine with a restricted knob, then reads the force values that move to that distance before the test conditions are harmonized for the batch data to be comparable
(a) Measurement spatial description: the measurement space in the official specifications for FCA-50N is 50 — 80 mm, which indicates the distance of the platform from the screw of the forceometer, which will vary according to the location of the measurement meter; — — The maximum sample height of about 80 mm (when fitted with the DST/DSV series) does not contain the thickness of the clamp
Q: FCA-50N with no thruster?
A: Excludes. The platform is only loaded with the implementing agency and the force value is read out by the thrusting measure attached.. A push-pulsor measure of the IMADA (IMADA, Japan) DST/DSV or ZTS/ZTA series 2N — 1000N, selected for the corresponding process according to the range of measured values. XQ or ZTS/ZTA series 2N — 1000N
Q: Why is the capacity only 50 N? Q: Why is the
A: FCA-50N is positioned as a compact, compact type with a desktop capacity of 50 N (approximately 5 kgf), suitable for testing of small force values such as key presses, switches, endors, film; if measured with greater force value, Please select the SVH/SVL (1000 N) or MX series
Q: How do you use the process limits?Sp
A: The flight of the platform 0 — 45 mm, setting the end of the pressure by the position button. Each time the pressure is set, the trigger stops at the same position, the distance is loaded and the batch is tested consistently
Q: Can you put it on the triangle?
A: Official indications can be provided to extend measurements (triggers are self-contained and not officially sold) by matching the handles or the user-owned triangle. —
Q: Are the clips and relays randomly attached?
A: No collateral. The machine is only equipped with the machine's own body and the modeling and the meter, the clip and the switch are to be selected separately. The clips are selected by the sample shape and size - stretching the clip, compressing the presses, removing the wheeling and so on; Specific models can be confirmed by call.!
Q: What does the measuring space 50 — 80 mm mean?
A: The distance between the platform surface and the screw of the force meter will vary according to the location of the monitor (official specification 50 ~ 80 mm); maximum sample height of about 80 mm, None of the clips are available, and the actual space available will vary slightly depending on the packaging
Q: What kind of measurement are not available?
A: Officially clear FCA-50N cannot be combined with high-capacity measurement, i.e., not applicable to ZTS/ZTA-2500N ~ 5000N, DPU/DPUH series, FB/FS/PS/PSS/PSM series and PSH series; suitable for the DST/DSV and ZTS/ZTA series 2N ~ 1000N
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.