IMADA MSF-50N Force & Material Testing (Model MSF-50N) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA MSF-50N Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force & Material Testing
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | MSF-50N |
|---|---|
| Series | MS Series Portable Type Knob Test Unit units (IMADA JapanIMADA) |
| Type | Portable / Type Knob Unit units (Compact, Knob Type) |
| Maximum Load | 50 N |
| Maximum Sample Height | Approx. 44 mm(units Surface to Measure Rod Tip) |
| Quantity | 18 mm / 1 Rotation ( Knob) |
| Operation Method | Rotatable Knob plus |
| Dimensions | Approx. Width 110 × Depth 81 × Height 204 mm |
| Net Weight | Approx. 1.2 kg |
| — Displacement Division | This Model is MS Series Standard Type; such as requires Force — Displacement Analysis, MSL-50N(FA Version) |
| Notes | This unit units is plus Unit , Force Value by with Force Gauges Reading Output, Force Gauges optional. Body Area Minimum, Weight most a , Suitable Small Space and Multi points Position. |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wires, etc., stretching, compressing, stripping, plugging, etc. The curves and damage tests impose a stable, consistent load. The electronics, connectors and beams, auto parts, hardware plastics, packaging printing, medical equipment and the materials testing, research and development of certification and the grade of the gymnastics.Stights and test materials
(a) The method of loading the meter into the platform installation seat, the corresponding kit between the meter and the platform, which is loaded by a spin button when the sample is placed; and the platform provides a constant elastic angle of application;_ The test conditions for the same samples were therefore more consistent and more repetitive than hand-held measurements
Small practicality: The whole machine is only 110 x 81 x 204 mm, about 1.2 kg, which can be placed directly at the production line, drawer or fixed on the treatment device, especially for key presses, The small-scale sample of micro-switches, small shrapnel, etc. is sampled for sampling and multi-point layout
Measurement spatial description: The maximum sample height is approximately 44 mm, which indicates the distance from the surface to the screw of the forceometer, does not contain the thickness of the clip, and the actual usable altitude will vary slightly depending on the packaging
Q: What's the difference between MSF-50N and KV-50N? Q: Q: Q
A: Both are hand-held hand-held hand-held handheld with the same capacity as 50 N. Differentiated in volume from in quantity: MSF-50N to 18 mm/turn, Smaller size (110 x 81 x 204 mm, approximately 1.2 kg); KV-50N to 1.0 mm/Traffic, XXQx XSv X ZX V slightly larger volume (140 x 180 x 220 mm about 2 kg) and more fine load. , X
Q: Can you do power-diversion analysis?
A: MSF-50N is the standard type and does not per se a shift output; if the need - move analysis, please select FA version of the MS series MSL-50N, X X X and with MSL-50N force - the migration unit and the measurement meter to support the movement output.A-V-V-V-V
Q: What is FA version?
A: FA refers to the version of the output meter moving distance (official -FA option) which is a linear ruler and an output meter inside the machine. MS in the series MSL-50N is a : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Concomitant with the official FSA series - The Bit Migration Analysis Cell is real-time-capable of drawing power - the Bit Shifting Curve; MSF-50N is standard type and does not provide a place-shift output
Q: Why is the capacity only 50 N? Q: Why is the
A: MSF-50N is positioned as a super-strength portable device with a desktop capacity of 50 N (approximately 5 kgf), suitable for very low force samples; if the measured value is greater, Please select the SVH/SVL (1000 N) or MX series
Q: Are the clips and relays randomly attached?
A: No collateral. The machine is only equipped with the machine's own body and the modeling and the meter, the clip and the switch are to be selected separately. The clips are selected by the sample shape and size - stretching the clip, compressing the presses, removing the wheeling and so on; Specific models can be confirmed by call.!
Q: How do you choose a hand and an electric platform?!
A: A simple, power-free, low cost, fixed-loaded angle and fixed-in-take load for a manual platform suitable for routine tests and tests with small sample size and low force value; if a numerical speed and process is required, loop load, Bulk automatic testing or force control, please select the MX/MX2/MX3/EMX series power-motivator station
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.