IMADA FSA-0.5K3-2~500N Force-Displacement Measurement Unit (Model FSA-0.5K3-2~500N) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA FSA-0.5K3-2~500N force-displacement measurement unit: ZTA gauge, MX3-500N-FA stand, 2000 Hz sampling, 2-500 N, 10-300 mm/min.
Brand: IMADA | Category: Force & Material Testing
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | FSA-0.5K3-2~500N |
|---|---|
| Series | FSA Series Force — Displacement Measurement Single Element (IMADA JapanIMADA) |
| Type | Type Motorised Unit units Type (Standard Type / Next Series) |
| Force Value Range | 2~500N(Complete Unit Capacity by ZTA Force Gauges Capacity is Standard) |
| Matching Measuring Force Meter | ZTA Series Digital Force Gauges(Supplied Included): ZTA-2N ~ 500N |
| Matching Unit Unit | MX3-500N-FA(Unit units Capacity 500 N, Built-in Linear Scale) |
| Maximum Sample Height | Approx. 235 mm |
| Test Speed | 10 ~ 300 mm/min |
| Stroke Limit | above, Lower Limit digits Knob (Limit-Knobs) |
| Displacement Measuring | Built-in Linear Scale; Resolution 0.001 mm(Software Display) / 0.01 mm(Measuring Force Meter Display) |
| Force Value Accuracy | ±0.2% F.S. ±1 digit |
| Displacement Accuracy | ±0.1 mm ±1 digit(No Load) |
| Sampling Period | 2000 times / s (Display more New 16 times / s) |
| Unit Unit Functions | JOG / Manual / Automatic ( Ring) three Type Measuring Mode, Counting Device / Setting when Device, Force Value Control, Overload , , General-purpose Setting Setting, Test Conditions more Setting |
| Software Operation Setting | ✓( under Version Test Conditions Setting Software) |
| Graphing Software | Force Recorder Next Professional(under Version) |
| Supplied Cable | Dedicated Cable CB-718(Connection Measuring Force Meter, Unit units and Linearity Scale) |
| Output Interface | USB, RS232C, ±2V DC Analog Output, Comparison Device, Overload, Comparison Device, USB Disk ( Disk excluding) |
| Power Supply | AC100 ~ 240V Free Input (Unit units and Measuring Force Meter each Power Supply) |
| Operating Environment | Temperature 0 ~ 40°C, Humidity 20 ~ 80%RH |
| Optional with | Length Stroke -L(+200mm), -2L(+400mm); Speed Range more -V45 / -V90 / -V450 / -V600 / -V900; External Signal Input Output -CN(optional) |
| Unit Unit Deformation Quantity | less than 0.5 mm |
| Supplied Accessories | Manual, Check Certificate, Warranty Certificate, Power Cable, Use , USB Wire, Driver CD-ROM(incl. Data Recording Software Force Logger), Graphing Software |
| Notes | This Model is Welding Systems: incl. ZTA Digital Force Gauges, Built-in Linear Scale FA Unit units, Graphing Software and Standard Accessories. Electric (PC) and optional Accessories not at Supply Range internal. |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The IMADA FSA-0.5K3-2~500N is a vertical motorised force–displacement measurement unit from the FSA series. IMADA defines the FSA series as everything needed for force–displacement measurement and delivers it as a complete system: a ZTA digital force gauge, an MX3-500N-FA test stand with a built-in linear scale (stand capacity 500 N), the CB-718 cable, graphing software and standard accessories. It arrives ready to run — there is no need to match a stand and a gauge separately. Force range 2–500 N, maximum specimen height approximately 235 mm, test speed 10–300 mm/min.
A force–time curve always advances from left to right, so it cannot show whether a specimen returns to zero during unloading. A force–displacement curve bends back as displacement reverses, revealing hysteresis, which is why it is better suited to tactile testing and material characterisation. Measuring displacement is measuring deformation: it answers directly how much force is needed to compress or stretch a sample by a given number of millimetres.
Tensile, compression, peel, insertion / withdrawal, bending and destruction tests on electronic components, connectors and harness terminals, keys and switches, springs, rubber and plastic parts, films and adhesives, packaging and paper, hardware, textiles and wire, and cushioning foams — in incoming inspection, R&D verification and quality-control stations across electronics, automotive, plastics, packaging, medical devices, food and daily chemicals, and research institutions. IMADA's published examples include compression and tensile tests, spring characterisation, elasticity and foam rebound, switch characteristics, insertion force, tape peel, and friction of film and paper, as well as rubber properties, car-seat hardness, sliding-structure pull-out, sports-equipment rebound, food texture, LCD panel strength, cosmetic container fit and connector withdrawal.
Is a force gauge included? Yes. Unlike a stand sold on its own, the FSA system includes the ZTA digital force gauge, the stand with a built-in linear scale, the CB-718 dedicated cable, graphing software and standard accessories. A PC and optional test fixtures are not included.
What sets the system capacity? The selected ZTA gauge capacity, limited by the stand capacity — the effective upper limit is the lower of the two. The complete unit is rated 2–500 N with a 500 N stand.
How is displacement measured? The linear scale built into the stand connects to the gauge through the CB-718 cable; the gauge displays displacement and outputs it with the force value to the PC for plotting.
Are reports and optional fixtures available? Software supports printed and Word / Excel / PDF reports, CSV export and up to 5 overlaid curves. Standard accessories support basic tests; tensile, compression, peel and friction fixtures are optional and vary slightly with the ZTA model chosen. Long-stroke (-L +200 mm, -2L +400 mm), alternative speed ranges (-V45 / -V90 / -V450 / -V600 / -V900) and external signal I/O (-CN) are available as options.
All figures above are transcribed from official IMADA documentation without conversion or inferred values. This is a quotation-only catalogue; no prices are listed.
For configuration advice, a quotation, lead time, an English datasheet or an optional calibration certificate, please contact our engineers.