IMADA FSA-0.5KE2-2~500N Force & Material Testing (Model FSA-0.5KE2-2~500N) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA FSA-0.5KE2-2~500N Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force & Material Testing
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | FSA-0.5KE2-2~500N |
|---|---|
| Series | FSA Series Force — Displacement Measurement Single Element (IMADA JapanIMADA) |
| Type | Type Motorised Unit units Type (Height Functions Type / Next Series) |
| Force Value Range | 2~500N(Complete Unit Capacity by ZTA Force Gauges Capacity is Standard) |
| Matching Measuring Force Meter | ZTA Series Digital Force Gauges(Supplied Included): ZTA-2N ~ 500N |
| Matching Unit Unit | EMX2-500N-FA(Unit units Capacity 500 N, Built-in Linear Scale) |
| Maximum Sample Height | Approx. 280 mm |
| Test Speed | 0.5 ~ 600 mm/min |
| Stroke Limit | Number digits Setting + above Lower Limit digits Knob (Digital / Limit-Knobs) |
| Displacement Measuring | Built-in Linear Scale; Resolution 0.001 mm(Software Display) / 0.01 mm(Measuring Force Meter Display) |
| Force Value Accuracy | ±0.2% F.S. ±1 digit |
| Displacement Accuracy | ±0.1 mm ±1 digit(No Load) |
| Sampling Period | 2000 times / s (Display more New 16 times / s) |
| Unit Unit Functions | JOG / Manual / Automatic ( Ring) three Type Measuring Mode, Counting Device / Setting when Device, Force Value Control, Overload , , Auto Test Mode 5 Type Mode, Single Setting, Setting |
| Software Operation Setting | ✓( under Version Test Conditions Setting Software) |
| Graphing Software | Force Recorder Next Professional(under Version) |
| Supplied Cable | Dedicated Cable CB-718(Connection Measuring Force Meter, Unit units and Linearity Scale) |
| Output Interface | USB, RS232C, ±2V DC Analog Output, Comparison Device, Overload, Comparison Device, USB Disk ( Disk excluding) |
| Power Supply | AC100 ~ 240V Free Input (Unit units and Measuring Force Meter each Power Supply) |
| Operating Environment | Temperature 0 ~ 40°C, Humidity 20 ~ 80%RH |
| Optional with | Length Stroke -L(+300mm); Speed Range more —(This unit Type not Provided Speed Range more ); External Signal Input Output standard (Equipped) |
| Unit Unit Deformation Quantity | less than 0.25 mm |
| Supplied Accessories | Manual, Check Certificate, Warranty Certificate, Power Cable, Use , USB Wire, Driver CD-ROM(incl. Data Recording Software Force Logger), Graphing Software |
| Notes | This Model is Welding Systems: incl. ZTA Digital Force Gauges, Built-in Linear Scale FA Unit units, Graphing Software and Standard Accessories. Electric (PC) and optional Accessories not at Supply Range internal. |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wire, buffers and foam, etc., stretching, compressing, stripping, etc. The correlation between the power-required values and the displacements in the plug-in, bending and destruction tests is common in electronics, connectors and beam processing, auto parts, hardware plastic, packaging printing, medical equipment, food and solarization, and the inspection of inputs from scientific institutions. Research and development of certification and pipelines.!
Power-by-way measure value: when looking at the power-time curve, the curve always moves from left to right, and it is not possible to determine whether the sample returns zero during the unloading process; the power of the shift-by-axis - the shift curve returns with the position, so that it can identify the lag.- More suitable for tactile testing and material properties assessment. Measurement shifts are equal to measuring deformations, and you can intuitively answer questions like "How hard is it to compress the sample to how many millimeters? "?
Examples of typical measurements listed officially: compression and stretching tests of various materials, simple evaluation of spring properties, material fleximetric tests, impact tests of buffer materials, evaluation of switch properties, component insertion evaluation, tape strip stripping tests, Measurement of the fray coefficient between film and paper; other applications include characterization of rubber products, car cushion hardness, slide-out tests, sports (tennis) reburst tests, food (mass) perception tests, LCD panel strength test, cosmetic packagings embedded test, connector extraction test, etc
Configuration description: This model randomly attached ZTA series of measures (ZTA-2N ~ 500N) and standard attachments; optional attachments such as stretching/ compression/ stripping/ friction need to be extra-chosen;Screech_Treasury_Treasury_Treasury_Treasury_Treasury_Tresty_Types_Type_Types_Types_Type_T Computers (PC) are not covered by the supply
Q: The FSA series contains a non-pull puller?
A: Contain. Unlike the one-stop shop, the official definition of the FSA series is a complete system, containing the ZTA series of boost pullers, the test set of the built-in linear rulers, Specialized cable CB-718, plotting software and standard attachments; however, computers (PC) and optional attachments are not in supply
Q: What determines the capacity of the system as a whole?!??
A: The capacity of the ZTA thruster is determined by the size of the chosen ZTA, and is limited by the capacity of the platform - the actual measurement cap is to take smaller values from both. Official note: The full capacity is based on the capacity of the selected ZTA model, Only station capacity can be measured when the capacity of the platform is less than the measurement of the force
Q: How do you measure the movement?!?
A: Pre-loaded linear rulers on the platform, connected to the meter by a special cable CB-718, with a shift value displayed by the meter and exported with force value to the computer-position shift curve; the distance of the platform moved can be set numerically,_ Test conditions are stored
Q: Do you automatically judge the ON/ OFF dots?
A: Yes. The ON/ OFF point, which automatically marks the switch using the.50 On function, allows for the identification of lag and zero return; this function requires a separate cable
Q: How many circuits do you need?
A: The power supply is required for each power station and the meter (AC100 — 240V freely entered). The working environment is temperature 0 — 40°C, Humidity 20 — 80% RH
Q: Can software report?Spunner
A: Yes. Software supports printing and / / / / PDF reporting format output, and measurements export CSV, Force - A position shift curve can be compared with a maximum of 5 bar
Q: Are the annexes random?
A: Randomly attached standard annexes are used for basic tests, randomly attached annexes vary slightly depending on the ZTA model selected; optional attachments such as stretching, compression, stripping, friction etc. are to be extra-chosen, Computers (PC) are not covered by the supply
Q: What's the difference between FSA and the stand?
A: A single-purchase platform is only a loading agency and force values are read out with a separate calculator; FSA delivers "FA platform + ZTA meter + special cable + plotting software with linear rulers" as a package, which allows direct power-diversion analysis. + + special cable + plotting software Save the self-assembly and debugging.!
Q: What is the maximum capacity of this model?
A: This type of power mass 2 500N, with a set-up capacity 500 N. Officially: The full capacity is based on the capacity of the selected ZTA thruster, When the desktop capacity is less than the measurement of the power, only the station capacity is measured, so the actual measurement ceiling is the smaller of the two.?
Q: What's the model of the accompaniment? What's the characteristics??
A: Accompanied platform is EMX2-500N-FA (desk capacity 500 N). EMX2 series is an upgrade, operational upgrade, X series. series and the download version of the software that is used to set the test conditions for `stategiofa'; the drawing software is upgraded accordingly to 'Operator KO'..ScortsScene_TextSp. . Reference: EMX
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.