Home › Products

Product Overview

IMADA FSA-2.5HK2-2~2500N Force & Material Testing (Model FSA-2.5HK2-2~2500N) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA FSA-2.5HK2-2~2500N Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.

Brand: IMADA | Category: Force & Material Testing

Sales Inquiries: 15626018696 · 78403603@qq.com

IMADA FSA-2.5HK2-2~2500N Force & Material Testing

Technical Specifications

ModelFSA-2.5HK2-2~2500N
SeriesFSA Series Force — Displacement Measurement Single Element (IMADA JapanIMADA)
TypeType Motorised Unit units Type
Force Value Range2~2500N(Complete Unit Capacity by ZTA Force Gauges Capacity is Standard)
Matching Measuring Force MeterZTA Series Digital Force Gauges(Supplied Included): ZTA-1000N / ZTA-2500N
Matching Unit UnitMH2-2500N-FA(Unit units Capacity 2500 N, Built-in Linear Scale)
Maximum Sample HeightApprox. 340 mm(Measuring Force Meter Measure Rod Tip to Fixture Installation Rotation Connection pcs GF-2)
Test Speed10 ~ 300 mm/min
Stroke Limitabove, Lower Limit digits Knob (Limit-Knobs)
Displacement MeasuringBuilt-in Linear Scale; Resolution 0.001 mm(Software Display) / 0.01 mm(Measuring Force Meter Display)
Force Value Accuracy±0.2% F.S. ±1 digit
Displacement Accuracy±0.1 mm ±1 digit(No Load)
Sampling Period2000 times / s (Display more New 16 times / s)
Unit Unit FunctionsJOG / Manual / Automatic ( Ring) three Type Measuring Mode, Counting Device / Setting when Device, Force Value Control, Overload ,
Software Operation Setting—(No)
Graphing SoftwareForce Recorder Professional( CD)
Supplied CableDedicated Cable CB-718(Connection Measuring Force Meter, Unit units and Linearity Scale)
Output InterfaceUSB, RS232C, ±2V DC Analog Output, Comparison Device, Overload, Comparison Device, USB Disk ( Disk excluding)
Power SupplyAC100 ~ 240V Free Input (Unit units and Measuring Force Meter each Power Supply)
Operating EnvironmentTemperature 0 ~ 40°C, Humidity 20 ~ 80%RH
Optional withLength Stroke —(This unit Type not Provided Length Stroke ); Speed Range more -V75 / -V150; External Signal Input Output -CN(optional)
Unit Unit Deformation Quantityless than 0.5 mm
Supplied AccessoriesManual, Check Certificate, Warranty Certificate, Power Cable, Use , USB Wire, Driver CD-ROM(incl. Data Recording Software Force Logger), Graphing Software
NotesThis Model is Welding Systems: incl. ZTA Digital Force Gauges, Built-in Linear Scale FA Unit units, Graphing Software and Standard Accessories. Electric (PC) and optional Accessories not at Supply Range internal.

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. Complete system delivery: The officially defined FSA series is "all tools required for power-diversion measurements", and contains three major parts of the test table and the drawing software for the number of thrust pullers, built-in linear scales, and opens up the device._ There is no need to compose the machine and the meter
  2. 2000 Hz High-speed sampling: sampling cycle 2000 times/sec, tracking rapid changes in force values, matching the speed and direction of power for the power motors, and the repetitivity of the power-positioning curves is significantly better than manual measurements. of the power motorss
  3. Real-time force - Bit shift curve: The measurement meter is connected to the randomly attached USB line of the computer, which allows real-time recording and drawing of the Power - Bit shift curve
  4. Software is fully functional: statistical value display, curve superposition (maximum 5), comment insertion, reference line, graphic scaling, data can export CSV, and supports printing and ~/ / / / / PDF reporting format output
  5. Force accuracy 0.2% F.S. 1 digit; displacement resolution 0.001 mm (soft display)/0.01 mm (magnometer display) 1 ; (software display) 0.01 mm (magometer display) 0.1 mm 1 digit (no load). 1 Screak Screak
  6. The measurement meter can be deactivated: a randomly attached ZTA series of measurement measures can be used separately for handheld measurements and can also be individually inspected, calibrated and maintained
  7. function: ON/ OFF point that automatically marks the switch to enable identification of lags (re) and returns zero, X-X-X-X-Q point X-rays X-rays / OFF point / X-X-X-Q point / X-X-X-Q point X X Q point / point point it for touch-type tests (required cable).?
  8. Annexes may be expanded: randomly attached standard annexes are used for basic tests, and optional attachments (selection) can be added for stretching, compression, stripping, friction, etc
  9. Output interface rich: USB, serial RS232C, 2V DC Simulation Output, Comparator, Overload and Subcomparison,Scorted, 2VSimulator, Simulation, DCScort, SmallScreak, Standard, Standard, Stands, and supports the USB flash drive (the flash drive does not contain it)
  10. On-board: the MH2 series is a standard bed-stand for high value value; the current is a larger section of the bed-space series and the sample space and maximum sample length is also greater
  11. The station moves distance can be numerically set (or set by a restricted button) test condition can be stored without each readjustment being required for repeated testing

Applied trade & test object

Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wire, buffers and foam, etc., stretching, compressing, stripping, etc. The correlation between the power-required values and the displacements in the plug-in, bending and destruction tests is common in electronics, connectors and beam processing, auto parts, hardware plastic, packaging printing, medical equipment, food and solarization, and the inspection of inputs from scientific institutions. Research and development of certification and pipelines.!

Power-by-way measure value: when looking at the power-time curve, the curve always moves from left to right, and it is not possible to determine whether the sample returns zero during the unloading process; the power of the shift-by-axis - the shift curve returns with the position, so that it can identify the lag.- More suitable for tactile testing and material properties assessment. Measurement shifts are equal to measuring deformations, and you can intuitively answer questions like "How hard is it to compress the sample to how many millimeters? "?

Examples of typical measurements listed officially: compression and stretching tests of various materials, simple evaluation of spring properties, material fleximetric tests, impact tests of buffer materials, evaluation of switch properties, component insertion evaluation, tape strip stripping tests, Measurement of the fray coefficient between film and paper; other applications include characterization of rubber products, car cushion hardness, slide-out tests, sports (tennis) reburst tests, food (mass) perception tests, LCD panel strength test, cosmetic packagings embedded test, connector extraction test, etc

Configuration description: This model randomly attached ZTA series of measures (ZTA-1000N / ZTA-2500N) and standard attachments; optional attachments such as stretching / compression / stripping / friction need to be extra-chosen; / / / ZTA-2500N / / muffle Computers (PC) are not covered by the supply

FAQ

Q: The FSA series contains a non-pull puller?

A: Contain. Unlike the one-stop shop, the official definition of the FSA series is a complete system, containing the ZTA series of boost pullers, the test set of the built-in linear rulers, Specialized cable CB-718, plotting software and standard attachments; however, computers (PC) and optional attachments are not in supply

Q: What determines the capacity of the system as a whole?!??

A: The capacity of the ZTA thruster is determined by the size of the chosen ZTA, and is limited by the capacity of the platform - the actual measurement cap is to take smaller values from both. Official note: The full capacity is based on the capacity of the selected ZTA model, Only station capacity can be measured when the capacity of the platform is less than the measurement of the force

Q: How do you measure the movement?!?

A: Pre-loaded linear rulers on the platform, connected to the meter by a special cable CB-718, with a shift value displayed by the meter and exported with force value to the computer-position shift curve; the distance of the platform moved can be set numerically,_ Test conditions are stored

Q: Do you automatically judge the ON/ OFF dots?

A: Yes. The ON/ OFF point, which automatically marks the switch using the.50 On function, allows for the identification of lag and zero return; this function requires a separate cable

Q: How many circuits do you need?

A: The power supply is required for each power station and the meter (AC100 — 240V freely entered). The working environment is temperature 0 — 40°C, Humidity 20 — 80% RH

Q: Can software report?Spunner

A: Yes. Software supports printing and / / / / PDF reporting format output, and measurements export CSV, Force - A position shift curve can be compared with a maximum of 5 bar

Q: Are the annexes random?

A: Randomly attached standard annexes are used for basic tests, randomly attached annexes vary slightly depending on the ZTA model selected; optional attachments such as stretching, compression, stripping, friction etc. are to be extra-chosen, Computers (PC) are not covered by the supply

Q: What's the difference between FSA and the stand?

A: A single-purchase platform is only a loading agency and force values are read out with a separate calculator; FSA delivers "FA platform + ZTA meter + special cable + plotting software with linear rulers" as a package, which allows direct power-diversion analysis. + + special cable + plotting software Save the self-assembly and debugging.!

Q: What is the maximum capacity of this model?

A: This type of power mass 2 2500N, with a set-up capacity 2500 N. Officially: The full capacity is based on the capacity of the selected ZTA thruster, When the desktop capacity is less than the measurement of the power, only the station capacity is measured, so the actual measurement ceiling is the smaller of the two.?

Q: What's the model of the accompaniment? What's the characteristics??

A: Accompanied platform is MH2-2500N-FA (body capacity 2500 N). The MH2 series is a standard bedstand for high value value; the current is a larger section of the bedtime series. Sample space and maximum sample length are also greater.!

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

IMADA ZU-20kN Force & Material Testing
Force & Material Testing

IMADA ZU-20kN Force & Material Testing

ZU-20kN
└ IMADA (Japan)
IMADA ZU-10kN Force & Material Testing
Force & Material Testing

IMADA ZU-10kN Force & Material Testing

ZU-10kN
└ IMADA (Japan)
IMADA XY-500N-EZ Force & Material Testing
Force & Material Testing

IMADA XY-500N-EZ Force & Material Testing

XY-500N-EZ
└ IMADA (Japan)
IMADA XY-500N-M8 Force & Material Testing
Force & Material Testing

IMADA XY-500N-M8 Force & Material Testing

XY-500N-M8
└ IMADA (Japan)
IMADA XY-500N-BB Force & Material Testing
Force & Material Testing

IMADA XY-500N-BB Force & Material Testing

XY-500N-BB
└ IMADA (Japan)
IMADA XY-500N Force & Material Testing
Force & Material Testing

IMADA XY-500N Force & Material Testing

XY-500N
└ IMADA (Japan)