IMADA DSV-2N Force Gauges (Model DSV-2N) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA DSV-2N Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | DSV-2N |
|---|---|
| Rated Capacity | 2 N |
| Displayed Value | 2.000N(2000mN) |
| Minimum Reading | 0.001N(1mN) |
| Can Switching Unit | N, mN, gf, lbf(This levels can mN / gf) |
| Measurement Type | Force, Pressure (Dual toward Measurement, Pressure / compatible) |
| Accuracy | ±0.2% F.S. ±1 digit |
| Sampling Rate | Maximum 1000 times / s (1000 data / sec at maximum) |
| Display Screen | 4 digits with No. LCD Display, Backlight can Open |
| Display Update Rate | 16 times / s |
| Test Shaft Thread | M6 |
| Alarm | Body Over Over Preset Angle (Left Right / above under) i.e. Output Alarm , Hold Measurement a (Tilt Alarm) |
| Built-in Memory | 1000 groups Measurement Data (incl. Day Time and Pass / Fail Judgment , can Rear Adjustment ) |
| Peak Functions | Peak Hold ( / Pressure ), Continuous Peak Mode (Continuous Peak Mode, not per Key i.e. can Continuous Recording Peak) |
| Judgment Function | Comparison Device (Judgment Pass / Fail / not Pass / Fail, Setting above Lower Limit Rear Automatic Reading) |
| Other functions | Sensitivity 3 levels Setting, Display Rotation, No. Rotation, Setting Setting, Day Time Setting, Unit Setting when (Off timer, Automatic Electric), Calibration Time Indication (Calibration time notice) |
| Overload Specifications | : Full Scale 90% or more; Overload Warning (Alarm / Display): Full Scale 110%; Safe Overload Approx. 200% F.S. |
| Power Supply | built-in Ni-MH Rechargeable Battery, can via USB Power Supply (PC, Shift Power Supply, AC Adapter); Full Approx. 4.5 hours |
| Battery Life | Backlight Approx. 30 hours; Backlight Open Approx. 14 hours |
| Output Interface | USB, RS232C |
| Operating Environment | Temperature 0 ~ 40°C, Humidity 20 ~ 80% RH(non-condensing) |
| Dimensions | Approx. Width 72 × Depth 32 × Height 181 mm |
| Body Weight | Approx. 460 g(not Same Range with Difference ) |
| Standard Accessories | Force Logger Data Acquisition Software, USB Wire, AC Adapter, Standard Accessories, Portable Package, Operating Instructions , Check Certificate |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Model | Rated capacity | Displayed Value | Minimum Reading | Switchable Units |
|---|---|---|---|---|
| DSV-2N | 2 N | 2.000N(2000mN) | 0.001N(1mN) | N, mN, gf, lbf (mN/ gf for this file)Sp |
| DSV-5N | 5 N | 5.000N(5000mN) | 0.001N(1mN) | N, mN, gf, lbf (mN/ gf for this file)Sp |
| DSV-20N | 20 N | 20.00N | 0.01N | N、kgf(gf)、lbf |
| DSV-50N | 50 N | 50.00N | 0.01N | N、kgf(gf)、lbf |
| DSV-200N | 200 N | 200.0N | 0.1N | N、kgf(gf)、lbf |
| DSV-500N | 500 N | 500.0N | 0.1N | N、kgf(gf)、lbf |
| DSV-1000N | 1000 N | 1000N(1.000kN) | 1N(0.001kN) | N, kN, kof (gf), lbf (this file can be cut kN) |
Q: What's the difference between DSV and DST? Q: Q: Q
A: DSV is a high-end version of IMADA hand-held high-pull puller (official position: High-end with a few green motti) Quest Ons but right this of DST07,!? This means that DST features are retained, with several additional functions. 0.2%F.S., sampling speed, portability and charging are consistent with DST; ZX %F.S. sample rate, portability and charging mode; DSV extraAppearances. - Call the police、Continuous peak mode_Functioned_Functioned_FandInternal 1000 Point Data StorageThree functions. If you need to have a hand-held monitoring, you can choose DST; if you want to have a more repeated measurement, you can save data off a computer, DSV
Q: What's the use of Tict Al arm?.!?
A: The most problematic aspect of handheld measurements is that each measurement has a different angle, the angle changes, the differentials change, and the reading repetition decreases. DSV built-in attitude sense. When the airframe is tilted to the left/ right/ upper/ lower, the operator is reminded to maintain the same measuring posture, thereby increasing the repeated handheld measurements; it can also be recorded automatically in the event of a posture anomaly. Marks the irregular operational data separately
Q: What about the seven model?!??
A: Select the daily test to reach the full range 20% ~ 80%. Press keys, micro-switches, film, thin lines, and so onDSV-2N / DSV-5N(0.001N, most fine); connector plug-in, end pressure, general key and spring selectionDSV-20N / DSV-50N(most common); hardware plastics, structurals, strippingDSV-200N / DSV-500Nscaling, steel, material specimens, etcDSV-1000NThe selection of a lot of time for micro-power alone will lose the ability to distinguish, not "to exaggerate."
Q: Can you record data without answering the computer?
A: Yes. The inner 1000 point is stored and is accessible ex post from the computer log measurement values (including date time and determination results); to continuously collect curves or export / CSV, The computer is connected to the USB line with a randomly attached ut Lo.O.O. software, and the PC end does not need to be extra-driven (free). Further advanced data management and curve analysis can be done using the official ZLINK4/ulanger software. / azanander
Q: What guarantees of accuracy? What happens when you pass?!
A: Measuring accuracy 0.2% F.S. 1 digit, with a sampling rate of maximum 1000 times/ s to avoid missing instant peaks. 1A warning is given when loads exceed the full mass of 90%, and more than 110% triggers an overload warning (alarm and display alert), the instrument is safely overloaded about 200%F.S.S.S.S.S.S.S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S However, long-term overloading of the damage sensor is recommended to keep the daily test power in the full range 20% ~ 80% when selected
Q: Need a power supply? Is it easy to charge?
A: Use without power supply. The body contains Ni-MH charge batteries, and backlights off can be used continuously for approximately 30 hours (backlights on for about 14 hours). Full-time 4.5 hours; chargeable by computer USB mouth, mobile power source or AC adapter, both on site and outside. Working environment temperature 0 — 40°C, humidity 20 — 80 % RH
Q: Can test stations or other accessories be attached??
A: Yes. — DSV can be installed on a IMADA test platform for stable desktop measurements (e.g. MX/ MX2/ EMX series, / EMX series of electric power stations,S SVH / SVL / HV / SH Manual, FCA / KV / MSF / MSL Portable.ddd.d.d.d.d.d.d.d.d.d.d.d.d.d.d.S .Sp.SKS HGB-1 hand-held (for extended hand-held and stable work), WL01-ADP/WL01-USB wireless transmission unit, and ZLINK4/Othander software for continuous curve analysis. Reference: FOH-1
Official Positioning Note: The DSV series is a high end model of the IMADA handheld number sharp pullr (Hand-de-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e Positioned as "a few functions added to the DST series of features" - added features include attitude (slant) alarms, continuous peak mode and built-in 1000 dot storage, and the following features are added:ScreaksScopesStampss of the systemssScopesssScope Some functions are required to be used by linking to official alternatives (e.g. wireless units, software)
Option hint: This model is rated at 2 N, display value 2.000N (2000MN), minimum reading 0.001N (1MN), toggleable units N, mN, XCXXN, XN , NXQ , , gf, lbf (mN/gf in this file). It is recommended that the daily test effort be left between the full-scale 20% ~ 80%, which ensures both resolution and excess load. Guangzhou Yunke Electronics supply, and caller selection and test set are welcome
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.