Home › Products

Product Overview

IMADA DSV-200N Force Gauges (Model DSV-200N) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA DSV-200N Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.

Brand: IMADA | Category: Force Gauges

Sales Inquiries: 15626018696 · 78403603@qq.com

IMADA DSV-200N Force Gauges

Technical Specifications

ModelDSV-200N
Rated Capacity200 N
Displayed Value200.0N
Minimum Reading0.1N
Can Switching UnitN、kgf(gf)、lbf
Measurement TypeForce, Pressure (Dual toward Measurement, Pressure / compatible)
Accuracy±0.2% F.S. ±1 digit
Sampling RateMaximum 1000 times / s (1000 data / sec at maximum)
Display Screen4 digits with No. LCD Display, Backlight can Open
Display Update Rate16 times / s
Test Shaft ThreadM6
AlarmBody Over Over Preset Angle (Left Right / above under) i.e. Output Alarm , Hold Measurement a (Tilt Alarm)
Built-in Memory1000 groups Measurement Data (incl. Day Time and Pass / Fail Judgment , can Rear Adjustment )
Peak FunctionsPeak Hold ( / Pressure ), Continuous Peak Mode (Continuous Peak Mode, not per Key i.e. can Continuous Recording Peak)
Judgment FunctionComparison Device (Judgment Pass / Fail / not Pass / Fail, Setting above Lower Limit Rear Automatic Reading)
Other functionsSensitivity 3 levels Setting, Display Rotation, No. Rotation, Setting Setting, Day Time Setting, Unit Setting when (Off timer, Automatic Electric), Calibration Time Indication (Calibration time notice)
Overload Specifications: Full Scale 90% or more; Overload Warning (Alarm / Display): Full Scale 110%; Safe Overload Approx. 200% F.S.
Power Supplybuilt-in Ni-MH Rechargeable Battery, can via USB Power Supply (PC, Shift Power Supply, AC Adapter); Full Approx. 4.5 hours
Battery LifeBacklight Approx. 30 hours; Backlight Open Approx. 14 hours
Output InterfaceUSB, RS232C
Operating EnvironmentTemperature 0 ~ 40°C, Humidity 20 ~ 80% RH(non-condensing)
DimensionsApprox. Width 72 × Depth 32 × Height 181 mm
Body WeightApprox. 460 g(not Same Range with Difference )
Standard AccessoriesForce Logger Data Acquisition Software, USB Wire, AC Adapter, Standard Accessories, Portable Package, Operating Instructions , Check Certificate

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

ModelRated capacityDisplayed ValueMinimum ReadingSwitchable Units
DSV-2N2 N2.000N(2000mN)0.001N(1mN)N, mN, gf, lbf (mN/ gf for this file)Sp
DSV-5N5 N5.000N(5000mN)0.001N(1mN)N, mN, gf, lbf (mN/ gf for this file)Sp
DSV-20N20 N20.00N0.01NN、kgf(gf)、lbf
DSV-50N50 N50.00N0.01NN、kgf(gf)、lbf
DSV-200N200 N200.0N0.1NN、kgf(gf)、lbf
DSV-500N500 N500.0N0.1NN、kgf(gf)、lbf
DSV-1000N1000 N1000N(1.000kN)1N(0.001kN)N, kN, kof (gf), lbf (this file can be cut kN)

Key Advantages

  1. I'm calling the policeThe aircraft is tilted to the left/ right/ upper/ lower, alerting the operator to the same angle of measurement. The most repetitive enemy is the inconsistent angle when carrying the measurements, and this function is directed directly at the pain point
  2. We'll continue the voyage with it. We'll charge it in a variety of waysbuilt-in Ni-MH battery, backlight off can be used approximately 30 hours on a continuous basis; charged by computer USB mouth, mobile power source or AC adapter, travel, travel, travel, travel, : XQ cell, or QC. either the site nor the production line were restricted to electricity.!
  3. Free Data Managementrandomly attached to the ut Lo. & Data Acquisition software, with the USB connection computer collecting and saving data, PC end free drive, and easier test recording and report collation
  4. Continuous peak mode to increase efficiency%Continuous peak mode (Contin BEAKL) does not have to press a key to record the peak continuously, and the batch is faster
  5. Internal 1000 Point StorageThe data of the 1000 group (including date time and determination) can be stored on board, and the computer can be recorded and access can be easily compared afterwards
  6. 0.2%F.S. Precision + 1000 times/ sSecMeasuring accuracy 0.2% F.S. 1 digit, maximum 1000 times/ s sample to capture flash peaks such as plugging, keying, breaking, etc. 1
  7. Overload and security designFull-scale 90% alarm, 110% overload warning, securely overloading about 200%F.S.; 4 bit symbol LCD screen with backlight, The workshops and dark environments can be clearly read
  8. Full%1%2Comparer determination, sensitivity 3, display inverted, symbol inverted, locking, date time setting, switchdown timing and correction time tips, and longer-term use management is better

Applied industry & test project

  • Industry: Electronics, connectors and wires, key presses and switches, hardware plastics, packaging printing, medical devices, auto parts, textiles and wires, scientific institutions and third-party testing institutions
  • Test: End plug-in, key/ switch action, stripping, tape glue, spring-bulk, bottle cap-opening, welding strength, thin film-string, product damage intensity, material stretching / compression test

FAQ

Q: What's the difference between DSV and DST? Q: Q: Q

A: DSV is a high-end version of IMADA hand-held high-pull puller (official position: High-end with a few green motti) Quest Ons but right this of DST07,!? This means that DST features are retained, with several additional functions. 0.2%F.S., sampling speed, portability and charging are consistent with DST; ZX %F.S. sample rate, portability and charging mode; DSV extraAppearances. - Call the police、Continuous peak mode_Functioned_Functioned_FandInternal 1000 Point Data StorageThree functions. If you need to have a hand-held monitoring, you can choose DST; if you want to have a more repeated measurement, you can save data off a computer, DSV

Q: What's the use of Tict Al arm?.!?

A: The most problematic aspect of handheld measurements is that each measurement has a different angle, the angle changes, the differentials change, and the reading repetition decreases. DSV built-in attitude sense. When the airframe is tilted to the left/ right/ upper/ lower, the operator is reminded to maintain the same measuring posture, thereby increasing the repeated handheld measurements; it can also be recorded automatically in the event of a posture anomaly. Marks the irregular operational data separately

Q: What about the seven model?!??

A: Select the daily test to reach the full range 20% ~ 80%. Press keys, micro-switches, film, thin lines, and so onDSV-2N / DSV-5N(0.001N, most fine); connector plug-in, end pressure, general key and spring selectionDSV-20N / DSV-50N(most common); hardware plastics, structurals, strippingDSV-200N / DSV-500Nscaling, steel, material specimens, etcDSV-1000NThe selection of a lot of time for micro-power alone will lose the ability to distinguish, not "to exaggerate."

Q: Can you record data without answering the computer?

A: Yes. The inner 1000 point is stored and is accessible ex post from the computer log measurement values (including date time and determination results); to continuously collect curves or export / CSV, The computer is connected to the USB line with a randomly attached ut Lo.O.O. software, and the PC end does not need to be extra-driven (free). Further advanced data management and curve analysis can be done using the official ZLINK4/ulanger software. / azanander

Q: What guarantees of accuracy? What happens when you pass?!

A: Measuring accuracy 0.2% F.S. 1 digit, with a sampling rate of maximum 1000 times/ s to avoid missing instant peaks. 1A warning is given when loads exceed the full mass of 90%, and more than 110% triggers an overload warning (alarm and display alert), the instrument is safely overloaded about 200%F.S.S.S.S.S.S.S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S However, long-term overloading of the damage sensor is recommended to keep the daily test power in the full range 20% ~ 80% when selected

Q: Need a power supply? Is it easy to charge?

A: Use without power supply. The body contains Ni-MH charge batteries, and backlights off can be used continuously for approximately 30 hours (backlights on for about 14 hours). Full-time 4.5 hours; chargeable by computer USB mouth, mobile power source or AC adapter, both on site and outside. Working environment temperature 0 — 40°C, humidity 20 — 80 % RH

Q: Can test stations or other accessories be attached??

A: Yes. — DSV can be installed on a IMADA test platform for stable desktop measurements (e.g. MX/ MX2/ EMX series, / EMX series of electric power stations,S SVH / SVL / HV / SH Manual, FCA / KV / MSF / MSL Portable.ddd.d.d.d.d.d.d.d.d.d.d.d.d.d.d.S .Sp.SKS HGB-1 hand-held (for extended hand-held and stable work), WL01-ADP/WL01-USB wireless transmission unit, and ZLINK4/Othander software for continuous curve analysis. Reference: FOH-1

Official Positioning Note: The DSV series is a high end model of the IMADA handheld number sharp pullr (Hand-de-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e-e Positioned as "a few functions added to the DST series of features" - added features include attitude (slant) alarms, continuous peak mode and built-in 1000 dot storage, and the following features are added:ScreaksScopesStampss of the systemssScopesssScope Some functions are required to be used by linking to official alternatives (e.g. wireless units, software)

Option hint: This model is rated at 200 N, display value 200.0N, minimum reading 0.1N, and can be changed in units N, kgf (gf), lbf., , X, X, X, X, , XV , XV , XVXX, XVX, XVXX It is recommended that the daily test be left in the full range of 20% ~ 80%, which ensures both resolution and excess load. Guangzhou Yunke Electronics is available and the caller and test set are welcome

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

IMADA ZTS-LM-20kN Force Gauges
Force Gauges

IMADA ZTS-LM-20kN Force Gauges

ZTS-LM-20kN
└ IMADA (Japan)
IMADA ZTS-LM-10kN Force Gauges
Force Gauges

IMADA ZTS-LM-10kN Force Gauges

ZTS-LM-10kN
└ IMADA (Japan)
IMADA ZTS-LM-5000N Force Gauges
Force Gauges

IMADA ZTS-LM-5000N Force Gauges

ZTS-LM-5000N
└ IMADA (Japan)
IMADA ZTS-LM-2000N Force Gauges
Force Gauges

IMADA ZTS-LM-2000N Force Gauges

ZTS-LM-2000N
└ IMADA (Japan)
IMADA ZTS-LM-1000N Force Gauges
Force Gauges

IMADA ZTS-LM-1000N Force Gauges

ZTS-LM-1000N
└ IMADA (Japan)
FeaturedIMADA ZTS-LM-500N Force Gauges
Force Gauges

IMADA ZTS-LM-500N Force Gauges

ZTS-LM-500N
└ IMADA (Japan)