ASKER DD5-A Hardness Testers (Model DD5-A) is a Hardness Testers supplied by Guangzhou Yunke Electronics Co., Ltd. ASKER DD5-A Hardness Testers — Hardness Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: ASKER | Category: Hardness Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | DD5-A |
|---|---|
| Type | Number digits Type Rubber Hardness Testers(デジタルデュロメータ) |
| Series | ASKER DD5 Series |
| Applicable Standard | JIS K 6253-3、JIS K 7215、ISO 48-4、ASTM D 2240 |
| Measurement Range | 0 ~ 100 points |
| Minimum Reading | 0.1 points |
| Indenter Shape | Height 2.50mm, 35° units , Terminal Surface φ0.79mm |
| Spring Load | 0 points = 550mN(56g)/100 points = 8050mN(821g) |
| Plus Pressure Surface | φ18mm, in Hole φ3mm |
| Measurement Mode | ① Peak Hold Mode (Reading Maximum)② Setting when Hold Mode (1 ~ 15 s can per 1 s Setting)③ General Mode (Real-time Value Display) |
| External Output | USB Connection / RS-232C Connection (two a Type) |
| Power Supply | AC Adapter (100 ~ 240V) |
| Dimensions | Approx. Width 73 × Depth 28.5 × Height 117.5mm |
| Weight | Approx. 300g |
| Primary Applications | a Rubber |
| Origin | Japan Control (MADE IN JAPAN) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Model | Yes, the rules | Pump shape% | Spring weightSpunner%1S | Main purposeCreation of |
|---|---|---|---|---|
| DD5-A | JIS K 6253-3、JIS K 7215、ISO 48-4、ASTM D 2240 | Specifications: 2.50mm 0.79mm 35. Please contact our engineers for the full technical wording. | 0 point = 550mN (56g) / 100 point = 8050mN (821g) | General rubberCrew% |
| DD5-C | JIS K 7312、JIS S 6050 | High 2.54mm, 5.08mm Hemispheric | 0 point = 539mN (55g) / 100 point = 8379mN (855g) | Soft rubber, polyurethane foam, sponges, curls, film sheets, clay, footwear.! |
| DD5-D | JIS K 6253-3、JIS K 7215、ISO 48-4、ASTM D 2240 | High 2.50mm, 30° conical, front-end R0.1mmSpwxSpS | 0 point = 0mN (0g) / 100 point = 44500mN (4538g) | Hard rubber, plastics |
| DD5-E | JIS K 6253-3、ISO 48-4 | High 2.50mm, 5.00mm Hemispheric | 0 point = 550mN (56g) / 100 point = 8050mN (821g) | Soft rubber, polyurethane foam, sponges, thin film |
| DD4-A | JIS K 6253-3、JIS K 7215、ISO 48-4、ISO 868、ASTM D 2240、DIN 53505 | Specifications: 2.50mm 0.79mm 35. Please contact our engineers for the full technical wording. | 0 point = 550mN (56g) / 100 point = 8050mN (821g) | General rubberCrew% |
| DD4-C | JIS K 7312、JIS S 6050 | High 2.54mm, 5.08mm Hemispheric | 0 point = 539mN (55g) / 100 point = 8379mN (855g) | Soft rubber, polyurethane foam, sponges, curls, film sheets, clay, footwear.! |
| DD4-D | JIS K 6253-3、JIS K 7215、ISO 48-4、ISO 868、ASTM D 2240、DIN 53505 | High 2.50mm, 30° conical, front-end R0.1mmSpwxSpS | 0 point = 0mN (0g) / 100 point = 44500mN (4538g) | Hard rubber, plastics |
| DD4-E | JIS K 6253-3、ISO 48-4 | High 2.50mm, 5.00mm Hemispheric | 0 point = 550mN (56g) / 100 point = 8050mN (821g) | Soft rubber, polyurethane foam, sponges, thin film |
Q: How do you choose the digital and the pointer?
A: A simple pointer (e.g. Type A) structure, without battery, or battery, ready to be used, suitable for rapid field screening and mass extraction; digital (DD5-A) resolution0.1 pointwhich can be changed to multiple time-keeping patterns and output data, suitable for statistical analysis where accurate recording, testing reports or computer access is required. The pressure needles are designed to match the spring charge weights and the measurements are comparable to those of the same specimen.S.S.S.SSSSSS
Q: What's the difference between DD5 and DD4? Q: Q: Q
A: According to official information, DD5 is the latest digital series with a shape of about 73 x depth 28.5 x height 117.5mm, heavy 300g, with external output , with a view to externalUSB or RS-232C Select Onekeep the time asScreen1 ~ 15 secSplitModifiable; DD4 shape approximately 69 x Deep 26/31.8 x High 101/103mm, Heavy about 235g,ScreaksScope of 26/31.8 of 235g of of External Output AsRS-232Ctime-keeping mode is broken down into JIS (3 sec / 15 sec), DIN / ISO (3 sec / 15 sec), ASTM (1 s) and USER (1 ~ 99 s). The selection is determined by the required output interface and timing accuracy
Q: How do you choose a model by material??
A: Consistency with pointer formula - general rubberType Asoft rubber, polyurethane foam, sponges, curls, film sheets, clay, footwearType C_C-C-C-C-C-Chard rubber and plasticsType D_Backgrounds_Backgroundsextreme soft material (type A measured below 20)Type EThe principle is that the specimen is hard to land in the 20 — 90 point, where the display is the most differentiated..SpunctionsStightStamp
Q: Do you need a power supply?
A: Yes. Digitally, with AC adapter powered, the adapter input 100 ~ 240V, which is directly usable in the domestic and foreign voltage environment and does not need to be extra transformer. If you wish to be removed from the power source, a needle type or a fixed-pressure weighting device may be considered for measurement at a fixed place
Q: Why is the same picture of the product?
A: ASKER Official use of uniform aerophysical images of different models in the same series (e.g. DD5-A and DD5-D official share the same map) DD5-C is the same as DD5-E; the same is true for the DD4 series, as is the difference in modelPumper and pressurized noodlesThe station takes official pictures and does not replace the crowned Li. if you want to confirm the pressure needle difference, please refer to the specification or call for advice..ScreenCharlieScreme
Q: What is the use of time-keeping patterns? Q
A: The length of rubber rigidity changes with the duration of the pressure needle stay (soften effect), so the standard specifies "set time to read after the application of the weight". The time-keeping mode is designed precisely for this: automatically lock readings at the set time. Time Avoid the time error caused by artificial stumps and ensure consistency in measurement conditions between operators and batches.!
Official Positioning Note: This modelDD5-Ais a ASKER DD5 series of digital rubber hardness meters, pressured pin shape 2.50mm, 35° cone, end 0.79mm, Spring weight 0 point = 550MN (56g) / 100 point = 8050MN (821g) = 821g = ZXC = ZXC = = Z = Z XV = Z = Z = Z = = Z = = Z = = = = Z 18mm, 3mm, minimum reading 0.1 point, External output USB connection / RS-232C connection (chosen), mainly for general rubber. Precise, rules JIS K 6253-3, JIS K 7215, ISO 48-4, ASTM D 2240
Option hint: The core value of the digital formula is 0.1 point resolution, time-keeping and data output, suitable for the occasion for reporting or statistical analysis; the pointer is more economical if only rapid determination is made on the ground. It is recommended that the specimen be hardened in the 20 — 90 point. Guangzhou Yunke Electronics is available and the caller is welcome
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.