Home › Products

Product Overview

ASKER DD4-E Hardness Testers (Model DD4-E) is a Hardness Testers supplied by Guangzhou Yunke Electronics Co., Ltd. ASKER DD4-E Hardness Testers — Hardness Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: ASKER | Category: Hardness Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

ASKER DD4-E Hardness Testers

Technical Specifications

ModelDD4-E
TypeNumber digits Type Rubber Hardness Testers(デジタルデュロメータ)
SeriesASKER DD4 Series
Applicable StandardJIS K 6253-3、ISO 48-4
Measurement Range0 ~ 100 points
Minimum Reading0.1 points
Indenter ShapeHeight 2.50mm, φ5.00mm Half
Spring Load0 points = 550mN(56g)/100 points = 8050mN(821g)
Plus Pressure Surfaceφ31.8mm, in Hole φ5.5mm
Measurement Mode① Peak Hold Mode ② Setting when Hold Mode (JIS: 3 s Rear or 15 s Rear; DIN / ISO: 3 s Rear or 15 s Rear; ASTM: 1 s Rear; USER: 1 ~ 99 s per 1 s Setting)③ General Mode (General Normal Measurement)
External OutputRS-232C Interface
Power SupplyAC Adapter (100 ~ 240V)
DimensionsApprox. Width 69 × Depth 31.8 × Height 103mm
WeightApprox. 235g
Primary ApplicationsRubber, , , Thin Film
OriginJapan Control (MADE IN JAPAN)

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


ModelYes, the rulesPump shape%Spring weightSpunner%1SMain purposeCreation of
DD5-AJIS K 6253-3、JIS K 7215、ISO 48-4、ASTM D 2240Specifications: 2.50mm 0.79mm 35. Please contact our engineers for the full technical wording.0 point = 550mN (56g) / 100 point = 8050mN (821g)General rubberCrew%
DD5-CJIS K 7312、JIS S 6050High 2.54mm, 5.08mm Hemispheric0 point = 539mN (55g) / 100 point = 8379mN (855g)Soft rubber, polyurethane foam, sponges, curls, film sheets, clay, footwear.!
DD5-DJIS K 6253-3、JIS K 7215、ISO 48-4、ASTM D 2240High 2.50mm, 30° conical, front-end R0.1mmSpwxSpS0 point = 0mN (0g) / 100 point = 44500mN (4538g)Hard rubber, plastics
DD5-EJIS K 6253-3、ISO 48-4High 2.50mm, 5.00mm Hemispheric0 point = 550mN (56g) / 100 point = 8050mN (821g)Soft rubber, polyurethane foam, sponges, thin film
DD4-AJIS K 6253-3、JIS K 7215、ISO 48-4、ISO 868、ASTM D 2240、DIN 53505Specifications: 2.50mm 0.79mm 35. Please contact our engineers for the full technical wording.0 point = 550mN (56g) / 100 point = 8050mN (821g)General rubberCrew%
DD4-CJIS K 7312、JIS S 6050High 2.54mm, 5.08mm Hemispheric0 point = 539mN (55g) / 100 point = 8379mN (855g)Soft rubber, polyurethane foam, sponges, curls, film sheets, clay, footwear.!
DD4-DJIS K 6253-3、JIS K 7215、ISO 48-4、ISO 868、ASTM D 2240、DIN 53505High 2.50mm, 30° conical, front-end R0.1mmSpwxSpS0 point = 0mN (0g) / 100 point = 44500mN (4538g)Hard rubber, plastics
DD4-EJIS K 6253-3、ISO 48-4High 2.50mm, 5.00mm Hemispheric0 point = 550mN (56g) / 100 point = 8050mN (821g)Soft rubber, polyurethane foam, sponges, thin film

Key Advantages

  1. 0.1 point number shows, reading is not disputedMinimum scale of 1 point relative to point size, digital resolution up toC%1%1Screaks0.1 point• Avoiding errors in human readings and differences in interpretation, especially in cases where the same specimen is measured by multiple persons and requires a decimal number
  2. Standard requirements for coverage of three measurement modelspeaks maintained (maximum read), timed (automatic locking of readings at specified time), normal mode (real time value display) The measurement conditions meet the standard time reading requirements. / ISO / ASTM or USER.. / ISO / ASTM or USER. / / / / / / / / / / / . . / / / / /. Reference: JIS
  3. Data are exportable, traceableRS-232C interface, measurement values can be transferred to a computer or recorder to facilitate the establishment of detection records, statistical process control (SPC) and retrospective
  4. Yes, it's all set.!at the same time, JIS K 6253-3, ISO 48-4 can be directly matched to the standard requirements in the client drawings and test specifications
  5. Japanese original, same source as ASKER pointerThe pressure needles and spring weight design extension ASKER pointer series, which is measured in the same condition as the pointer matching model, to facilitate smooth replacement of older equipment
  6. A pressure-bound weighterCharlieCombined with CL-150L/CLE-150 pressure-fixing heavy-loaders, which impose constant pressure by the charge-loader, further regulate the determination of conditions and increase repetition

Applied industry & test project

  • Industry: Rubber products, polyurethane foam and sponges, footwear, glue and tyres, plastics and engineering plastics, cable cables, film and packaging materials, scientific institutions and third-party testing bodies
  • Tests: rubber hardness, flexible foam hardness, plastic hardness, glue hardness, precision hardness to record 0.1 point decimals, feed and out-of-work sampling, SPC data collection

FAQ

Q: How do you choose the digital and the pointer?

A: A simple pointer (e.g. Type A) structure, without battery, or battery, ready to be used, suitable for rapid field screening and mass extraction; digital (DD4-E) resolution0.1 pointwhich can be changed to multiple time-keeping patterns and output data, suitable for statistical analysis where accurate recording, testing reports or computer access is required. The pressure needles are designed to match the spring charge weights and the measurements are comparable to those of the same specimen.S.S.S.SSSSSS

Q: What's the difference between DD5 and DD4? Q: Q: Q

A: According to official information, DD5 is the latest digital series with a shape of about 73 x depth 28.5 x height 117.5mm, heavy 300g, with external output , with a view to externalUSB or RS-232C Select Onekeep the time asScreen1 ~ 15 secSplitModifiable; DD4 shape approximately 69 x Deep 26/31.8 x High 101/103mm, Heavy about 235g,ScreaksScope of 26/31.8 of 235g of of External Output AsRS-232Ctime-keeping mode is broken down into JIS (3 sec / 15 sec), DIN / ISO (3 sec / 15 sec), ASTM (1 s) and USER (1 ~ 99 s). The selection is determined by the required output interface and timing accuracy

Q: How do you choose a model by material??

A: Consistency with pointer formula - general rubberType Asoft rubber, polyurethane foam, sponges, curls, film sheets, clay, footwearType C_C-C-C-C-C-Chard rubber and plasticsType D_Backgrounds_Backgroundsextreme soft material (type A measured below 20)Type EThe principle is that the specimen is hard to land in the 20 — 90 point, where the display is the most differentiated..SpunctionsStightStamp

Q: Do you need a power supply?

A: Yes. Digitally, with AC adapter powered, the adapter input 100 ~ 240V, which is directly usable in the domestic and foreign voltage environment and does not need to be extra transformer. If you wish to be removed from the power source, a needle type or a fixed-pressure weighting device may be considered for measurement at a fixed place

Q: Why is the same picture of the product?

A: ASKER Official use of uniform aerophysical images of different models in the same series (e.g. DD5-A and DD5-D official share the same map) DD5-C is the same as DD5-E; the same is true for the DD4 series, as is the difference in modelPumper and pressurized noodlesThe station takes official pictures and does not replace the crowned Li. if you want to confirm the pressure needle difference, please refer to the specification or call for advice..ScreenCharlieScreme

Q: What is the use of time-keeping patterns? Q

A: The length of rubber rigidity changes with the duration of the pressure needle stay (soften effect), so the standard specifies "set time to read after the application of the weight". The time-keeping mode is designed precisely for this: automatically lock readings at the set time. Time Avoid the time error caused by artificial stumps and ensure consistency in measurement conditions between operators and batches.!

Official Positioning Note: This modelDD4-Eis a ASKER DD4 series of digital rubber hardometers, pressured needle shape, high 2.50mm, 5.00mm hemispheric, Spring weight 0 point = 550mN (56g) / 100 point = 8050mN (821g) = 821g = ZXV = = Z = = ZX XV = Z = = Z = = = = Z = = = = Z 31.8mm, 5.5mm, , minimum reading 0.1, external output RS-232C interface, mainly for soft rubber, polyurethane foam, sponges, Slender. Prescription JIS K 6253-3, ISO 48-4

Option hint: The core value of the digital formula is 0.1 point resolution, time-keeping and data output, suitable for the occasion for reporting or statistical analysis; the pointer is more economical if only rapid determination is made on the ground. It is recommended that the specimen be hardened in the 20 — 90 point. Guangzhou Yunke Electronics is available and the caller is welcome

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

ASKER CL-150RC2 Hardness Testers
Hardness Testers

ASKER CL-150RC2 Hardness Testers

CL-150RC2
└ ASKER (Japan)
ASKER CL-150R2 Hardness Testers
Hardness Testers

ASKER CL-150R2 Hardness Testers

CL-150R2
└ ASKER (Japan)
ASKER CL-150RC1 Hardness Testers
Hardness Testers

ASKER CL-150RC1 Hardness Testers

CL-150RC1
└ ASKER (Japan)
ASKER CL-150R1 Hardness Testers
Hardness Testers

ASKER CL-150R1 Hardness Testers

CL-150R1
└ ASKER (Japan)
ASKER CL-150SL Hardness Testers
Hardness Testers

ASKER CL-150SL Hardness Testers

CL-150SL
└ ASKER (Japan)
ASKER CL-150H Hardness Testers
Hardness Testers

ASKER CL-150H Hardness Testers

CL-150H
└ ASKER (Japan)