IMADA PS-20lb Force Gauges (Model PS-20lb) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA PS-20lb Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | PS-20lb |
|---|---|
| Product Name | IMADA.PS-20lb Mechanical Pointer Force Gauges |
| Series | IMADA PS / PSS Series (Mechanical Pointer Force Gauges・ Standard Height Accuracy Type) |
| Measuring Method | Mechanical Pointer Indication (Spring Movement), No requires Power Supply |
| Measurement Type | Force, Pressure Force ( Dual toward Measurement) |
| Sales Region Notes | Model, Official 「Japan Meter Quantity Gauge Setting, not at Japan internal Sales 」 |
| Rated Capacity | 20lbf |
| Scale Unit | lbf( Force) |
| Scale Resolution | 0.2lbf |
| Number of Graduations | 100 Wire (30N / 300N / 3K / 30K / 30lb etc. Model is 120 Wire) |
| Indication Accuracy | ±0.1% F.S. or less |
| Movement Stroke | 10mm |
| Reading Method | Real-time Value / Peak Hold (Body Surface Open Switching) |
| Zero Adjustment Method | Zero Adjustment Ring (Tare ring) Zero Adjustment, can except Accessories Weight |
| Measuring Spindle Thread | M6 |
| Standard accessories | 8 pcs (A Type: Aluminium Control Accessories A-1~A-8), Operating Instructions, Portable Case, Check Pass / Fail |
| Dimensions | Approx. Width 67 × Depth 48 × Height 232.5mm |
| Body Weight | Approx. 580~670g(with Range not Same) |
| Operating Environment | Temperature 0~+40℃ |
| Power Supply | No requires Power Supply ( Mechanical Structure) |
| Origin | Japan Control (MADE IN JAPAN) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Model | Rated capacity | Tic resolution_Other |
|---|---|---|
| PS-5N | 5N | 0.05N |
| PS-10N | 10N | 0.1N |
| PS-20N | 20N | 0.2N |
| PS-30N | 30N | 0.25N |
| PS-50N | 50N | 0.5N |
| PS-100N | 100N | 1N |
| PS-200N | 200N | 2N |
| PS-300N | 300N | 2.5N |
| PS-500N | 500N | 5N |
Q: What about the PS series and the FB/FS, PSM, PSH series?
A: Same as a mechanical drobometer for IMADAFB/FS SeriesEconomic type, precision 0.3%F.S., process 10N ~ 500N; 500N; of the use of the use of the use of the means of productionPS/PSS SeriesFor standard high accuracy, 0.1%F.S., measured 5N ~ 500N; 0.1 F.S.S;Systems of the UnitedPSM SeriesFor high-precision breakdowns, the tic breakdown of the 150 line (the remaining 100 line) and the range 20N — 500N, suitable for the precise measurements requiring more readable numbersPSH SeriesThe normal sampling and production line is selected for PS, with economic preference for FB/FS, and is designed to be a “severe” for the purpose of the application of the following: Precise selection PSM and strong selection PSH. Reference: 500N, 3000N, 50kgf, 300kgf
Q: What's the difference between PS and PSS?SQ
A: The structure and accuracy of the two are fully consistent, with only a different scale:!PSIt's a N (Newton) scalePSSis a kilometer (kg strength). It is worth noting that PSS and PS-xK belong to PS-xlbInternational modelThe official label "The international model is not sold in Japan because of Japanese measurement"..!
Q: Why are there three typographical versions of N, kgf, lbf, and the same model?
A: IMADA provides corresponding typologies for measurement practices in different regions: N for public mechanics calculations, kgf for weight equivalent units commonly used in Japan and China, and lbf for British areas. The three equals the same process (e.g. PS-500N, PS-50K, PS-100lb) but the ticking plate and the internal spring are assigned to their respective units and cannot be read interchangeable. When selecting a purchase, you should choose the unit used for the internal testing criteria
Q: Can you measure peaks?Spunner
A: Yes. The top switch on the side of the plane is attached to the peak, and the maximum force value during the test is locked by a pointer and read before manually reset. If you need a "strength-time" curve or continuous data records, you can also use the "strength-time" curve to keep the peaks in order to keep the maximum level. The type of machine (e. g. ZTS/ ZTA/ DSV series) is selected
Q: What if the tablet pointers don't point zero?
A: A pre-use that can rotate the external circle of the table board without loadSundry (TareAd)return the pointer to zero. The attachments should also be changed to zero to subtract the attachments from their self-weight
Q: Can you match the test stand?Awk
A: Yes, this is a recommended approach to increasing the measurement of repetition. IMADA provides SVL-1000N (leveraging manual test stations) and SVH-1000N (hand-wheeled manual test stations) etc. The staggering machine is set on the test platform and is applied at an institutional rate, which significantly reduces the reading fluctuations caused by handheld operations.Stamp FOH-1 handles can also be selected to improve hand-held stability
Q: What about mechanical versus digital pushers?
A: Mechanical (PS/FB/PSM/PSH) without power, solid durability, readability, low cost, suitable for field spot tests, single point force recognition and teaching; digital (ZTS/ZTA/DSV) with higher accuracy, high speed sampling, Data storage and external output is appropriate for peak capture, curve analysis, data retention and automatic output determination. Both are often used in conjunction: production lines are examined digitally and on-site, mechanically, for rapid review
PS/PSS series in the IMADA mechanical thrusterScrellsSpunnersStightStStandard type (Standardğ)The official designation is "standard type of high accuracy, which allows for precision measurements" and has the following official description: spring structure determines itNot applicable to destructive testing or sustained vibration environments with high impactSpecifications: IEC 17025 10mm 0.1 ISO. Please contact our engineers for the full technical wording.
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.